参数资料
| 型号： | PCA9574HR,115 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 1/33页 |
| 文件大小： | 0K |
| 描述： | IC I/O EXPANDER I2C 8B 16HXQFN |
| 产品培训模块： | I²C Bus Fundamentals |
| 标准包装： | 1 |
| 接口： | I²C，SM 总线 |
| 输入/输出数： | 8 |
| 中断输出： | 是 |
| 频率 - 时钟： | 400kHz |
| 电源电压： | 1.1 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-XFQFN 裸露焊盘 |
| 供应商设备封装： | 16-UHXQFN |
| 包装： | 标准包装 |
| 包括： | POR |
| 产品目录页面： | 826 (CN2011-ZH PDF) |
| 其它名称： | 568-4936-6 |
当前第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页
1.
General description
The PCA9574 is a CMOS device that provides 8 bits of General Purpose parallel
Input/Output (GPIO) expansion in low voltage processor and handheld battery powered
mobile applications and was developed to enhance the NXP family of I2C-bus I/O
expanders. The improvements include lower supply current, lower operating voltage of
1.1 V to 3.6 V, dual and separate supply rails to allow voltage level translation anywhere
between 1.1 V and 3.6 V, 400 kHz clock frequency, and smaller packaging. Any of the
eight I/O ports can be configured as an input or output independent of each other and
default on start-up to inputs. I/O expanders provide a simple solution when additional I/Os
are needed while keeping interconnections to a minimum; for example in battery powered
mobile applications and clamshell devices for interfacing to sensors, push buttons,
keypad, etc. In addition to providing a flexible set of GPIOs, it simplifies interconnection of
a processor running at one voltage level to I/O devices operating at a different (usually
higher) voltage level. PCA9574 has built-in level shifting feature that makes these devices
extremely flexible in mixed signal environments where communication between
incompatible I/Os is required. The core of PCA9574 can operate at a voltage as low as
1.1 V while the I/O bank can operate in the range 1.1 V to 3.6 V. Bus-hold with
programmable on-chip pull-up or pull-down feature for I/Os is also provided.
The system master can enable the I/Os as either inputs or outputs by writing to the I/O
configuration register bits. The data for each input or output is kept in the corresponding
Input or Output register. The polarity of the read register can be inverted with the Polarity
inversion register (active HIGH or active LOW operation). Either a bus-hold function or
pull-up/pull-down feature can be selected by programming corresponding registers. The
bus-hold provides a valid logic level when the I/O bus is not actively driven. When
bus-hold feature is not selected, the I/O ports can be configured to have pull-up or
pull-down by programming the pull-up/pull-down configuration register.
An open-drain interrupt output pin (INT) allows monitoring of the input pins and is asserted
each time a change occurs on an input port unless that port is masked
(default = masked). A ‘GPIO All Call’ command allows programming multiple PCA9574s
at the same time even if they have different individual I2C-bus addresses. This allows
optimal code programming when more than one device needs to be programmed with the
same instruction or if all outputs need to be turned on or off at the same time. The internal
Power-On Reset (POR) or hardware reset pin (RESET) initializes the eight I/Os as inputs,
sets the registers to their default values and initializes the device state machine. The I/O
bank is held in its default state when the logic supply (VDD) is off.
One address select pin allows up to two PCA9574 devices to be connected with two
different addresses on the same I2C-bus.
PCA9574
8-bit I2C-bus and SMBus, level translating, low voltage GPIO
with reset and interrupt
Rev. 4 — 25 April 2012
Product data sheet
相关PDF资料 |
PDF描述 |
|---|---|
| PCA9575PW1,118 | IC I/O EXPANDER I2C 16B 24TSSOP |
| PCA9621PW,118 | IC BUS PORT 8BIT 65MA 16TSSOP |
| PCA9655EDWR2G | IC I/O EXPANDER I2C 16B SOIC-24 |
| PCA9670D,512 | IC I/O EXPANDER I2C 8B 16SOIC |
| PCA9671D,112 | IC I/O EXPANDER I2C 16B 24SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PCA9574PW | 功能描述:转换 - 电压电平 8-BIT I2C-BUS/SMBUS GPIO TRANS RoHS:否 制造商:Micrel 类型:CML/LVDS/LVPECL to LVCMOS/LVTTL 传播延迟时间:1.9 ns 电源电流:14 mA 电源电压-最大:3.6 V 电源电压-最小:3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MLF-8 |
| PCA9574PW,112 | 功能描述:转换 - 电压电平 8-BIT I2C-BUS/SMBUS RoHS:否 制造商:Micrel 类型:CML/LVDS/LVPECL to LVCMOS/LVTTL 传播延迟时间:1.9 ns 电源电流:14 mA 电源电压-最大:3.6 V 电源电压-最小:3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MLF-8 |
| PCA9574PW,118 | 功能描述:转换 - 电压电平 8-BIT I2C-BUS/SMBUS RoHS:否 制造商:Micrel 类型:CML/LVDS/LVPECL to LVCMOS/LVTTL 传播延迟时间:1.9 ns 电源电流:14 mA 电源电压-最大:3.6 V 电源电压-最小:3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MLF-8 |
| PCA9574PW-T | 功能描述:转换 - 电压电平 8-BIT I2C-BUS/SMBUS GPIO TRANS RoHS:否 制造商:Micrel 类型:CML/LVDS/LVPECL to LVCMOS/LVTTL 传播延迟时间:1.9 ns 电源电流:14 mA 电源电压-最大:3.6 V 电源电压-最小:3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MLF-8 |
| PCA9575HF,118 | 功能描述:I2C 接口集成电路 16-BIT I2C-BUS SMBus LW Voltage GPIO RoHS:否 制造商:NXP Semiconductors 电源电压-最大:5.5 V 电源电压-最小:2.3 V 最大工作频率:400 KHz 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-16 |
发布紧急采购，3分钟左右您将得到回复。