参数资料
型号: PCA9625D/S911,518
厂商: NXP Semiconductors
文件页数: 15/33页
文件大小: 0K
描述: IC LED DRIVER RGBA 32-SOIC
标准包装: 1,000
拓扑: 开路漏极,PWM
输出数: 16
内部驱动器:
类型 - 主要: 背光,LED 闪烁器
类型 - 次要: RGBA
频率: 1MHz
电源电压: 2.3 V ~ 5.5 V
输出电压: 24V
安装类型: 表面贴装
封装/外壳: 32-SOIC(0.295",7.50mm 宽)
供应商设备封装: 32-SO
包装: 管件
工作温度: -40°C ~ 85°C
其它名称: 935285147518
PCA9625D/S911-T
PCA9625D/S911-T-ND
NXP Semiconductors
PCA9625
16-bit Fm+ I 2 C-bus 100 mA 24 V LED driver
7.5 Power-on reset
When power is applied to V DD , an internal power-on reset holds the PCA9625 in a reset
condition until V DD has reached V POR . At this point, the reset condition is released and the
PCA9625 registers and I 2 C-bus state machine are initialized to their default states (all
zeroes) causing all the channels to be deselected. Thereafter, V DD must be lowered below
0.2 V to reset the device.
7.6 Software Reset
The Software Reset Call (SWRST Call) allows all the devices in the I 2 C-bus to be reset to
the power-up state value through a speci?c formatted I 2 C-bus command. To be performed
correctly, it implies that the I 2 C-bus is functional and that there is no device hanging the
bus.
The SWRST Call function is de?ned as the following:
1. A START command is sent by the I 2 C-bus master.
2. The reserved SWRST I 2 C-bus address ‘0000 011’ with the R/W bit set to ‘0’ (write) is
sent by the I 2 C-bus master.
3. The PCA9625 device(s) acknowledge(s) after seeing the SWRST Call address
‘0000 0110’ (06h) only. If the R/W bit is set to ‘1’ (read), no acknowledge is returned to
the I 2 C-bus master.
4. Once the SWRST Call address has been sent and acknowledged, the master sends
2 bytes with 2 speci?c values (SWRST data byte 1 and byte 2):
a. Byte 1 = A5h: the PCA9625 acknowledges this value only. If byte 1 is not equal to
A5h, the PCA9625 does not acknowledge it.
b. Byte 2 = 5Ah: the PCA9625 acknowledges this value only. If byte 2 is not equal to
5Ah, then the PCA9625 does not acknowledge it.
If more than 2 bytes of data are sent, the PCA9625 does not acknowledge any more.
5. Once the right 2 bytes (SWRST data byte 1 and byte 2 only) have been sent and
correctly acknowledged, the master sends a STOP command to end the SWRST Call:
the PCA9625 then resets to the default value (power-up value) and is ready to be
addressed again within the speci?ed bus free time (t BUF ).
The I 2 C-bus master must interpret a non-acknowledge from the PCA9625 (at any time) as
a ‘SWRST Call Abort’. The PCA9625 does not initiate a reset of its registers. This
happens only when the format of the SWRST Call sequence is not correct.
PCA9625_2
? NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 02 — 15 January 2008
15 of 33
相关PDF资料
PDF描述
PCA9626BS,518 IC LED DRIVER RGBA 48HVQFN
PCA9632DP2,118 IC LED DRIVER RGBA 10-TSSOP
PCA9633BS,118 IC LED DRIVER RGBA 16-HVQFN
PCA9634D,118 IC LED DRIVER RGBA 20-SOIC
PCA9635PW/S911,118 IC LED DRIVER RGBA 28-TSSOP
相关代理商/技术参数
参数描述
PCA9625D-T 功能描述:LED照明驱动器 16BT I2C FMTP LED HVCON RST OE RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9626B 功能描述:LED照明驱动器 24bit Fm+ I2C-bus 100mA 40V LED driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9626B,118 功能描述:LED照明驱动器 24bit Fm+ I2C-bus 100mA 40V LED driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9626B118 制造商:NXP Semiconductors 功能描述:IC LED DRVR LQFP
PCA9626BS,518 功能描述:LED照明驱动器 24-bit Fm+ I2C-bus 100mA 40 V LEDdriver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N