参数资料
型号: PCA9674PW,112
厂商: NXP Semiconductors
文件页数: 1/40页
文件大小: 0K
描述: IC I/O EXPANDER I2C 8B 16TSSOP
标准包装: 96
接口: I²C
输入/输出数: 8
中断输出:
频率 - 时钟: 1MHz
电源电压: 2.3 V ~ 5.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 16-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 16-TSSOP
包装: 管件
包括: POR
其它名称: 935282735112
PCA9674PW
PCA9674PW-ND
1.
General description
The PCA9674/74A provides general-purpose remote I/O expansion via the two-wire
bidirectional I2C-bus (serial clock (SCL), serial data (SDA)).
The devices consist of eight quasi-bidirectional ports, 1 MHz I2C-bus Fast-mode Plus
(Fm+) family interface, with high speed data transfer it can support PWM dimming of
LEDs, and higher I2C-bus drive 30 mA for more devices can be on the bus without the
need for bus buffers. Three hardware address inputs and interrupt output operating
between 2.3 V and 5.5 V. The quasi-bidirectional port can be independently assigned as
an input to monitor interrupt status or keypads, or as an output to activate indicator
devices such as LEDs. The system master can read from the input port or write to the
output port through a single register.
The low current consumption of 4.5
A (typical, static) is great for mobile applications and
the latched output ports have 25 mA high current sink drive capability for directly driving
LEDs.
The PCA9674 and PCA9674A are identical except for the different, non-overlapping slave
address. The three hardware selectable address pins can be decode to 64 addresses for
the PCA9674 and 62 addresses for the PCA9674A, so there can be up to 126 of these I/O
expanders PCA9674/74A together on the same I2C-bus without the need for bus buffers,
supporting up to 1008 I/Os (for example, 1008 LEDs).
The active LOW open-drain interrupt output (INT) can be connected to the interrupt logic
of the microcontroller and is activated when any input state differs from its corresponding
input port register state. It is used to indicate to the microcontroller that an input state has
changed and the device needs to be interrogated without the microcontroller continuously
polling the input register via the I2C-bus.
The internal Power-On Reset (POR) initializes the I/Os as inputs with a weak internal
pull-up 100
A current source.
2.
Features and benefits
I2C-bus to parallel port expander
1MHz I2C-bus interface (Fast-mode Plus I2C-bus)
SDA with 30 mA sink capability for 4000 pF buses
Operating supply voltage 2.3 V to 5.5 V with 5.5 V tolerant I/Os held to VDD with
100
A current source
8-bit remote I/O pins that default to inputs at power-up
Latched outputs with 25 mA sink capability for directly driving LEDs
Total package sink capability of 200 mA
PCA9674; PCA9674A
Remote 8-bit I/O expander for Fm+ I2C-bus with interrupt
Rev. 7 — 30 May 2013
Product data sheet
相关PDF资料
PDF描述
PCA9554D,118 IC I/O EXPANDER I2C 8B 16SOIC
PCA9554ATS,112 IC I/O EXPANDER I2C 8B 20SSOP
PCA9554AD,118 IC I/O EXPANDER I2C 8B 16SOIC
PCA9674APW,112 IC I/O EXPANDER I2C 8B 16TSSOP
PCA9670BS,118 IC I/O EXPANDER I2C 8B 16HVQFN
相关代理商/技术参数
参数描述
PCA9674PW-T 功能描述:接口-I/O扩展器 8-BIT I2C FM+ QB GPIO INT PU RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel
PCA9674TS 功能描述:接口-I/O扩展器 8-BIT I2C FM+ QB GPIO INT PU RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel
PCA9674TS,112 功能描述:接口-I/O扩展器 8-BIT I2C FM+ QB RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel
PCA9674TS,118 功能描述:接口-I/O扩展器 8-BIT I2C FM+ QB RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel
PCA9674TS-T 功能描述:接口-I/O扩展器 8-BIT I2C FM+ QB GPIO RST PU RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel