参数资料
型号: PCF8536AT/1,118
厂商: NXP Semiconductors
文件页数: 36/74页
文件大小: 0K
描述: IC LCD DRIVER LOW MPLEX 56TSSOP
特色产品: NXP - I2C Interface
标准包装: 1
显示器类型: LED,LCD
配置: 7段 + DP,14段 + DP + AP,点阵
接口: I²C
数字或字符: 20 字符,40 字符,320 元件
电源电压: 1.8 V ~ 5.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 56-TFSOP(0.240",6.10mm 宽)
供应商设备封装: 56-TSSOP
包装: 标准包装
其它名称: 568-8447-6
NXP Semiconductors
PCF8536
Universal LCD low multiplex driver with 6 channel PWM generator
? the RAM columns and the segment outputs,
? the RAM rows and the backplane outputs.
The display RAM bit map, Figure 20 , shows row 0 to row 7 which correspond with the
backplane outputs BP0 to BP7, and column 0 to column 43 which correspond with the
segment outputs S0 to S43. In multiplexed LCD applications, the data of each row of the
display RAM is time-multiplexed with the corresponding backplane (row 0 with BP0, row 1
with BP1, and so on).
When display data is transmitted to the PCF8536, the display bytes received are stored in
the display RAM in accordance with the selected LCD multiplex drive mode. The data is
stored as it arrives and depending on the current multiplex drive mode, data is stored in
quadruples, sextuples or bytes.
8.9.1 Data pointer (LCD part)
The addressing mechanism for the display RAM is realized using the data pointer. This
allows the loading of an individual display data byte, or a series of display data bytes, into
any location of the display RAM. The sequence commences with the initialization of the
data pointer by the load-data-pointer-LCD command (see Table 25 ).
Following this command, an arriving data byte is stored starting at the display RAM
address indicated by the data pointer.
The data pointer is automatically incremented in accordance with the chosen LCD
multiplex drive mode configuration. That is, after each byte is stored, the contents of the
data pointer are incremented
? by two (1:4 multiplex drive mode),
? by one or two (1:6 multiplex drive mode),
? by one (1:8 multiplex drive mode).
Multiplex drive 1:6 is a special case and is described later on.
When the address counter reaches the end of the RAM, it stops incrementing after the last
byte is transmitted. Redundant bits of the last byte and subsequent bytes transmitted are
discarded until the pointer is reset. To send new RAM data, the data pointer must be reset.
If an I 2 C-bus or SPI-bus data access is terminated early then the state of the data pointer
is unknown. The data pointer must then be re-written prior to further RAM accesses.
PCF8536
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 21 February 2012
? NXP B.V. 2012. All rights reserved.
36 of 74
相关PDF资料
PDF描述
RSC43DREF CONN EDGECARD 86POS .100 EYELET
RMC43DREF CONN EDGECARD 86POS .100 EYELET
T86C106K025ESAS CAP TANT 10UF 25V 10% 2312
VE-221-CW CONVERTER MOD DC/DC 12V 100W
PCF2112CT/1,118 IC LCD DRIVER 32SEG 40-VSOP
相关代理商/技术参数
参数描述
PCF8536BT 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:I2C/SPI LCD and PWM LED controller for industrial and automotive applications
PCF8536BT/1,118 功能描述:LCD 驱动器 UNIVERSAL LCD DRIVER 6 CH PWM GEN RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube
PCF8536BT1 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:I2C/SPI LCD and PWM LED controller for industrial and automotive applications
PCF8537AH/1,518 制造商:NXP Semiconductors 功能描述:LCD DRVR 2.5V/3.3V/5V 64-Pin TQFP T/R 制造商:NXP Semiconductors 功能描述:PCF8537AH/TQFP64/REEL13DP//1 - Tape and Reel 制造商:NXP Semiconductors 功能描述:IC DISPLAY DRVR MUX I2C 64TQFP 制造商:NXP Semiconductors 功能描述:PCF8537 Series Industrial LCD Driver for Multiplex Rates up to 1:8 - TQFP-64 制造商:NXP Semiconductors 功能描述:Industrial LCDdriver Rates up to 1:8
PCF8537BH/1,518 制造商:NXP Semiconductors 功能描述:LCD DRVR 2.5V/3.3V/5V 64-Pin TQFP T/R 制造商:NXP Semiconductors 功能描述:PCF8537BH/TQFP64/REEL13DP//1 - Tape and Reel 制造商:NXP Semiconductors 功能描述:IC DISPLAY DRVR MUX SPI 64TQFP 制造商:NXP Semiconductors 功能描述:PCF8537 Series Industrial LCD Driver for Multiplex Rates up to 1:8 - TQFP-64 制造商:NXP Semiconductors 功能描述:Industrial LCDdriver Rates up to 1:9