- 您现在的位置：买卖IC网 > PDF目录4384 > PCF8582C-2P/03,112 (NXP Semiconductors)IC EEPROM 2KBIT 100KHZ 8DIP PDF资料下载
参数资料
| 型号： | PCF8582C-2P/03,112 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 6/21页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 2KBIT 100KHZ 8DIP |
| 产品培训模块： | I²C Bus Fundamentals |
| 特色产品： | NXP - I2C Interface |
| 标准包装： | 50 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 2K (256 x 8) |
| 速度： | 100kHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 2.5 V ~ 6.0 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-DIP |
| 包装： | 管件 |
| 产品目录页面： | 827 (CN2011-ZH PDF) |
| 配用： | 568-4002-ND - DEMO BOARD I2C |
| 其它名称： | 568-3531-5 935191670112 PCF8582C2N |
Philips Semiconductors
PCF8582C-2
256 × 8-bit CMOS EEPROM with I 2 C-bus interface
8. Functional description
8.1 I 2 C-bus protocol
The I 2 C-bus is for 2-way, 2-line communication between different ICs or modules. The
serial bus consists of two bidirectional lines; one for data signals (SDA), and one for
clock signals (SCL).
Both the SDA and SCL lines must be connected to a positive supply voltage via a
pull-up resistor.
The following protocol has been de?ned:
? Data transfer may be initiated only when the bus is not busy.
? During data transfer, the data line must remain stable whenever the clock line is
HIGH. Changes in the data line while the clock line is HIGH will be interpreted as
control signals.
9397 750 14222
8.1.1
8.1.2
Bus conditions
The following bus conditions have been de?ned:
Bus not busy — Both data and clock lines remain HIGH.
Start data transfer — A change in the state of the data line, from HIGH-to-LOW,
while the clock is HIGH, de?nes the START condition.
Stop data transfer — A change in the state of the data line, from LOW-to-HIGH,
while the clock is HIGH, de?nes the STOP condition.
Data valid — The state of the data line represents valid data when, after a START
condition, the data line is stable for the duration of the HIGH period of the clock
signal. There is one clock pulse per bit of data.
Data transfer
Each data transfer is initiated with a START condition and terminated with a STOP
condition. The number of the data bytes, transferred between the START and STOP
conditions is limited to 7 bytes in the E/W mode and 8 bytes in the Page E/W mode.
Data transfer is unlimited in the read mode. The information is transmitted in bytes
and each receiver acknowledges with a ninth bit.
Within the I 2 C-bus speci?cations, a standard-speed mode (100 kHz clock rate) and a
fast speed mode (400 kHz clock rate) are de?ned. The PCF8582C-2 operates in only
the standard-speed mode.
By de?nition, a device that sends a signal is called a ‘transmitter’, and the device
which receives the signal is called a ‘receiver’. The device which controls the signal is
called the ‘master’. The devices that are controlled by the master are called ‘slaves’.
Each byte is followed by one acknowledge bit. This acknowledge bit is a HIGH level,
put on the bus by the transmitter. The master generates an extra acknowledge related
clock pulse. The slave receiver which is addressed is obliged to generate an
acknowledge after the reception of each byte.
? Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data
Rev. 04 — 25 October 2004
6 of 21
相关PDF资料 |
PDF描述 |
|---|---|
| EP4CGX110DF31C8 | IC CYCLONE IV FPGA 110K 896FBGA |
| M1A3PE3000-1PQG208 | IC FPGA 1KB FLASH 3M 208-PQFP |
| A3PE3000-1PQG208 | IC FPGA 1KB FLASH 3M 208-PQFP |
| A3PE3000-1PQ208 | IC FPGA 1KB FLASH 3M 208-PQFP |
| A3PE3000L-PQ208 | IC FPGA 1KB FLASH 3M 208-PQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PCF8582C-2T | 制造商:NXP Semiconductors 功能描述:Bulk |
| PCF8582C-2T/03 | 制造商:NXP Semiconductors 功能描述:EEPROM SERIAL 2K SMD 8582 SOIC8 制造商:NXP Semiconductors 功能描述:EEPROM SERIAL 2K, SMD, 8582, SOIC8 制造商:NXP Semiconductors 功能描述:IC, EEPROM, 2KBIT, I2C, 100KHZ, SOIC-8; Memory Size:2Kbit; Memory Configuration:2 BLK(256 x 8); Clock Frequency:100kHz; Supply Voltage Min:2.5V; Supply Voltage Max:6V; Memory Case Style:SOIC; No. of Pins:8; IC Interface Type:I2C ;RoHS Compliant: Yes 制造商:NXP Semiconductors 功能描述:Serial access EEPROM,PCF8582C-2T 2kb SO8 |
| PCF8582C-2T/03,112 | 功能描述:电可擦除可编程只读存储器 电可擦除可编程只读存储器 256X8 W/I2C 100KHZ -40+85 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| PCF8582C-2T/03,118 | 功能描述:电可擦除可编程只读存储器 256X8 电可擦除可编程只读存储器 I2C BUS SO-8 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| PCF8582C-2T/03 | 制造商:NXP Semiconductors 功能描述:EEPROM SERIAL 2K SMD 8582 SOIC8 |
发布紧急采购，3分钟左右您将得到回复。