- 您现在的位置：买卖IC网 > PDF目录69043 > PFS763HG (POWER INTEGRATIONS INC) 4.16 A SWITCHING CONTROLLER, 70 kHz SWITCHING FREQ-MAX, PZIP16 PDF资料下载
参数资料
| 型号： | PFS763HG |
| 厂商： | POWER INTEGRATIONS INC |
| 元件分类： | 稳压器 |
| 英文描述： | 4.16 A SWITCHING CONTROLLER, 70 kHz SWITCHING FREQ-MAX, PZIP16 |
| 封装： | HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SIP-16 |
| 文件页数： | 32/36页 |
| 文件大小： | 4692K |
| 代理商： | PFS763HG |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页当前第32页第33页第34页第35页第36页
Rev. C 02/11
5
TFS757-764HG
www.powerint.com
Pin Functional Description
MAIN DRAIN (D) Pin
Drain of the low-side MOSFET transistor forward converter.
STANDBY DRAIN (DSB) Pin
Drain of the MOSFET of standby power supply.
GROUND (G) Pin
This pin gives a signal current path to the substrate of the
low-side controller. This pin is provided to allow a separate
Kelvin connection to the substrate of the low-side controller to
eliminate inductive voltages that might be developed by high
switching currents in the SOURCE pin. The GROUND pin is
not intended to carrier high currents, instead it is intended as a
voltage-reference connection only.
SOURCE (S) Pin
SOURCE pin that is common to both the standby and main
supplies.
RESET (R) Pin
This pin provides information to limit the maximum duty cycle as a
function of the current fed into the RESET pin during the off-time
of the main converter MOSFET. This pin can also be pulled up to
bypass to signal remote ON/OFF of the main converter only.
ENABLE (EN) Pin
This is the ENABLE pin for the standby controller. Prior to the
start-up a resistor connected from ENABLE to BYPASS, can be
detected to select one of several internal current limits.
LINE-SENSE (L) Pin
This pin provides input bulk voltage line-sense function. This
information is used by the undervoltage and overvoltage
detection circuits for both main and standby. The pin can also
be pulled up to BYPASS or be pulled down to SOURCE to
implement a remote ON/OFF of both standby and main
supplies simultaneously. The LINE-SENSE pin works in
conjunction with the RESET pin to implement a duty-cycle limit
function. Also the LINE-SENSE pin compensates the value of
standby current limit so as to flatten the output overload
response as a function of input voltage.
FEEDBACK (FB) Pin
This pin provides feedback for the main two transistor forward
converter. An increase in current sink from FEEDBACK pin to
ground, will lead to a reduction in operating duty cycle. This pin
also selects the main device current limit at start-up (in a similar
manner to ENABLE pin).
BYPASS (BP) Pin
This is the decoupled operating voltage pin for the low-side
controller. At start-up the bypass capacitor is charged from an
internal device current source. During normal operation the
capacitor voltage is maintained by drawing current from the
low-side bias winding on the standby power supply. This pin is
also used to implement remote ON/OFF for the main controller.
This is done by driving extra current into the BYPASS pin when
we want to turn-on the Main controller. The BYPASS pin also
implements a latch-off function to disable standby and main
when the BP pin current exceeds latching threshold. Latch is
reset when LINE-SENSE pin falls below UV (off) standby
threshold.
HIGH-SIDE OPERATING VOLTAGE (VDDH) Pin
This is the high-side bias (VDD) of approximately 11.5 V. This
voltage is maintained with current from a high-side bias winding
on the main transformer and/or from a bootstrap diode from the
low-side standby bias supply.
HIGH-SIDE SOURCE (HS) Pin
SOURCE pin of the high-side MOSFET.
HIGH-SIDE DRAIN (HD) Pin
DRAIN pin of the high-side MOSFET. This MOSFET is floating
with respect to low-side source and ground.
Figure 2.
Pin Configuration.
PI-5290-110510
16
D
DSB
G S R EN
HD HD HS S
S
L FB
HS
HD
VDDH
BP
14
13
10 11
9
1
3
5 6 7 8
H Package (eSIP-16/12)
Exposed Pad
(Backside) Internally
Connected to SOURCE
Pin (see eSIP-16B
Package Drawing)
Exposed Metal
(On Edge)
Internally
Connected
相关PDF资料 |
PDF描述 |
|---|---|
| PFS758HG | 2.62 A SWITCHING CONTROLLER, 70 kHz SWITCHING FREQ-MAX, PZIP16 |
| PFS759HG | 2.94 A SWITCHING CONTROLLER, 70 kHz SWITCHING FREQ-MAX, PZIP16 |
| PGA112AIDGSR | SPECIALTY ANALOG CIRCUIT, PDSO10 |
| PGA113AIDGSRG4 | SPECIALTY ANALOG CIRCUIT, PDSO10 |
| PGA112AIDGSRG4 | SPECIALTY ANALOG CIRCUIT, PDSO10 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PFS764HG | 制造商:POWERINT 制造商全称:Power Integrations, Inc. 功能描述:Combined Two-Switch Forward and Flyback Power Supply Controllers with Integrated High Voltage MOSFETs |
| PFS7S 230/9V | 制造商:Aten International 功能描述:Bulk |
| PFS7S 230V/11 | 制造商:Aten International 功能描述: |
| PFS7S 230V/17V | 制造商:Aten International 功能描述: |
| PFS7S 230V/23 | 制造商:Aten International 功能描述: |
发布紧急采购，3分钟左右您将得到回复。