参数资料
型号: PIC18LF2523-I/SP
厂商: Microchip Technology
文件页数: 26/54页
文件大小: 0K
描述: IC PIC MCU FLASH 16KX16 28-DIP
产品培训模块: Asynchronous Stimulus
标准包装: 15
系列: PIC® 18F
核心处理器: PIC
芯体尺寸: 8-位
速度: 40MHz
连通性: I²C,SPI,UART/USART
外围设备: 欠压检测/复位,HLVD,POR,PWM,WDT
输入/输出数: 25
程序存储器容量: 32KB(16K x 16)
程序存储器类型: 闪存
EEPROM 大小: 256 x 8
RAM 容量: 1.5K x 8
电压 - 电源 (Vcc/Vdd): 2 V ~ 5.5 V
数据转换器: A/D 10x12b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 28-DIP(0.300",7.62mm)
包装: 管件
产品目录页面: 643 (CN2011-ZH PDF)
PIC18F2423/2523/4423/4523
DS39755C-page 32
2009 Microchip Technology Inc.
2.4
Operation in Power-Managed
Modes
The selection of the automatic acquisition time and A/D
conversion clock is determined in part by the clock
source and frequency while in a power-managed mode.
If the A/D is expected to operate while the device is in
a power-managed mode, the ADCS<2:0> bits in
ADCON2 should be updated in accordance with the
clock source to be used. The ACQT<2:0> bits do not
need to be adjusted as the ADCS<2:0> bits adjust the
TAD time for the new clock speed. After entering the
mode, an A/D acquisition or conversion may be started.
Once started, the device should continue to be clocked
by the same clock source until the conversion has been
completed.
If desired, the device may be placed into the
corresponding Idle mode during the conversion. If the
device clock frequency is less than 1 MHz, the A/D RC
clock source should be selected.
Operation in Sleep mode requires the A/D FRC clock to
be selected. If bits, ACQT<2:0>, are set to ‘000’ and a
conversion is started, the conversion will be delayed
one instruction cycle to allow execution of the SLEEP
instruction and entry to Sleep mode. The IDLEN bit
(OSCCON<7>) must have already been cleared prior
to starting the conversion.
2.5
Configuring Analog Port Pins
The ADCON1, TRISA, TRISB and TRISE registers all
configure the A/D port pins. The port pins needed as
analog inputs must have their corresponding TRIS bits
set (input). If the TRIS bit is cleared (output), the digital
output level (VOH or VOL) will be converted.
The A/D operation is independent of the state of the
CHS<3:0> bits and the TRIS bits.
Note 1: When reading the PORT register, all pins
configured as analog input channels will
read as cleared (a low level). Analog con-
version on pins configured as digital pins
can be performed. The voltage on the pin
will be accurately converted.
2: Analog levels on any pin defined as a
digital input may cause the digital input
buffer to consume current out of the
device’s specification limits.
3: The
PBADEN
bit
in
Configuration
Register 3H configures PORTB pins to
reset as analog or digital pins by controlling
how the PCFG<3:0> bits in ADCON1 are
reset.
相关PDF资料
PDF描述
GRM21B6R1H751JZ01L CAP CER 750PF 50V 5% R2H 0805
PIC18LF4520T-I/ML IC MCU FLASH 16KX16 44QFN
PIC18F66K80-H/PT IC MCU PIC 64KB FLASH 64TQFP
DEBF33A222ZN2A CAP CER 2200PF 1KV RADIAL
VE-232-CU CONVERTER MOD DC/DC 15V 200W
相关代理商/技术参数
参数描述
PIC18LF2523T-I/ML 功能描述:8位微控制器 -MCU 32KB FLSH 1536BRAM 8B nanoWatt RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC18LF2523T-I/SO 功能描述:8位微控制器 -MCU 32KB FLSH 1536BRAM 8B nanoWatt RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC18LF2525-I/SO 功能描述:8位微控制器 -MCU 48KB 3968 RAM 25I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC18LF2525-I/SP 功能描述:8位微控制器 -MCU 48KB 3968 RAM 25I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC18LF2525T-I/SO 功能描述:8位微控制器 -MCU 48KB 3968 RAM 25I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT