- 您现在的位置：买卖IC网 > PDF目录98053 > PKD4510ASI (ERICSSON POWER MODULES AB) 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PKD4510ASI |
| 厂商： | ERICSSON POWER MODULES AB |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT, SMD-24 |
| 文件页数： | 11/18页 |
| 文件大小： | 570K |
| 代理商： | PKD4510ASI |
Ericsson Internal
PRODUCT SPECIFICATION
2 (3)
Prepared (also subject responsible if other)
No.
HF/MPM/BY/P Anders Wgmark
1/1301-BMR 622 4510/81 Uen
Approved
Checked
Date
Rev
Reference
MPM/BY (Anders Wgmark)
(MICMALE)
2006-04-11
A
General Information
Ordering Information
See Contents for individual product ordering numbers.
Reliability
The Mean Time Between Failure (MTBF) is calculated at full
output power and an operating ambient temperature (T
A) of
+40°C, which is a typical condition in Information and
Communication Technology (ICT) equipment. Different
methods could be used to calculate the predicted MTBF
and failure rate which may give different results. Ericsson
Power Modules currently uses Telcordia SR332.
Predicted MTBF for the series is:
-
1.79 million hours according to Telcordia SR332, issue
1, Black box technique.
Telcordia SR332 is a commonly used standard method
intended for reliability calculations in ICT equipment. The
parts count procedure used in this method was originally
modelled on the methods from MIL-HDBK-217F, Reliability
Predictions of Electronic Equipment. It assumes that no
reliability data is available on the actual units and devices
for which the predictions are to be made, i.e. all predictions
are based on generic reliability parameters.
Compatibility with RoHS requirements
The products are compatible with the relevant clauses and
requirements of the RoHS directive 2002/95/EC and have a
maximum concentration value of 0.1% by weight in
homogeneous materials for lead in other applications other
than lead in solder, lead in high melting temperature type
solder, lead in glass of electronics components, lead in
electronic ceramic parts and lead as an alloying element in
copper containing up to 4% lead by weight, mercury,
hexavalent chromium, PBB and PBDE and of 0.01% by
weight in homogeneous materials for cadmium.
Exemptions in the RoHS directive utilized in the products:
-
Lead as an alloying element in copper alloy containing
up to 4% lead by weight (used in connection pins
made of Brass)
-
Lead in high melting temperature type solder (used to
solder the die in semiconductor packages)
-
Lead in glass of electronics components and in
electronic ceramic parts (e.g. fill material in chip
resistors)
-
Lead in solder for servers, storage and storage array
systems, network infrastructure equipment for
switching, signaling, transmission as well as network
management for telecommunication
(Note: the products are manufactured in lead-free
soldering processes and the lead present in the solder
is only located in the terminal plating finishes on some
components)
Quality Statement
The products are designed and manufactured in an
industrial environment where quality systems and methods
like ISO 9000, 6σ (sigma), and SPC are intensively in use to
boost the continuous improvements strategy. Infant
mortality or early failures in the products are screened out
and they are subjected to an ATE-based final test.
Conservative design rules, design reviews and product
qualifications, plus the high competence of an engaged
work force, contribute to the high quality of our products.
Warranty
Warranty period and conditions are defined in Ericsson
Power Modules General Terms and Conditions of Sale.
Limitation of Liability
Ericsson Power Modules does not make any other
warranties, expressed or implied including any warranty of
merchantability or fitness for a particular purpose
(including, but not limited to, use in life support
applications, where malfunctions of product can cause
injury to a person’s health or life).
E
PKD 4000 ASI series
DC/DC converters, Input 36-75 V, Output 20 A/50 W
EN/LZT 146 346 R1A April 2006
Ericsson Power Modules AB
Technical Specication
2
相关PDF资料 |
PDF描述 |
|---|---|
| PKD4218LASI | 1-OUTPUT 24.2 W DC-DC REG PWR SUPPLY MODULE |
| PKD4510ESI | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| PKD4218HESPBI | 1-OUTPUT 21 W DC-DC REG PWR SUPPLY MODULE |
| PKD4510ESPBI | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| PKD4218LESPBI | 1-OUTPUT 24 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PKD4510ESI | 功能描述:DC/DC转换器 3.3 Vdc 15A Iso Input 36-75V 50W RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PKD480 | 制造商:Pyle 功能描述:1 Diameter 200W Max Tweeter Dynamic Horn 制造商:PYLE 功能描述:TWEETER DYNAMIC HORN 1 DIAMETER 200W MAX |
| PKD60B1/4 | 功能描述:旋钮和转盘 STRGHT 0.8" W/SKIRT SWITCH KNOB RoHS:否 制造商:Davies Molding 材料:Phenolic 设计:Set Screw 轴尺寸:0.25 in 直径:3/4 in 颜色:Black 指示器型式:Line |
| PKD60B1/8 | 功能描述:旋钮和转盘 STRGHT 0.8" W/SKIRT SWITCH KNOB RoHS:否 制造商:Davies Molding 材料:Phenolic 设计:Set Screw 轴尺寸:0.25 in 直径:3/4 in 颜色:Black 指示器型式:Line |
| PKD60B101/4 | 制造商:TE Connectivity 功能描述:Switch Access Rotary Switch Round Knob |
发布紧急采购，3分钟左右您将得到回复。