
S/UNI-JET Data Sheet
Released
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-1990267, Issue 3
128
Register 331H: DS3 FRMR Interrupt Enable (ACE=0)
Bit
Type
Function
Default
Bit 7
R/W
COFAE
0
Bit 6
R/W
REDE
0
Bit 5
R/W
CBITE
0
Bit 4
R/W
FERFE
0
Bit 3
R/W
IDLE
0
Bit 2
R/W
AISE
0
Bit 1
R/W
OOFE
0
Bit 0
R/W
LOSE
0
LOSE
The LOSE bit enables interrupt generation when a DS3 LOSdefect is declared or removed.
The interrupt is enabled when a logic one is written.
OOFE
The OOFE bit enables interrupt generation when a DS3 OOF defect is declared or removed.
The interrupt is enabled when a logic one is written.
AISE
The AISE bit enables interrupt generation when the DS3 AIS maintenance signal is detected
or removed. The interrupt is enabled when a logic one is written.
IDLE
The IDLE bit enables interrupt generation when the DS3 IDLE maintenance signal is
detected or removed. The interrupt is enabled when a logic one is written.
FERFE
The FERFE bit enables interrupt generation when a DS3 far end receive failure defect is
declared or removed. The interrupt is enabled when a logic one is written.
CBITE
The CBITE bit enables interrupt generation when the S/UNI-JET detects a change of state in
the DS3 application identification channel. The interrupt is enabled when a logic one is
written.