参数资料
型号: PMEG6020ER,115
厂商: NXP Semiconductors
文件页数: 4/14页
文件大小: 150K
描述: DIODE SCHOTTKY 60V 2A SOD123
标准包装: 1
二极管类型: 肖特基
电压 - (Vr)(最大): 60V
电流 - 平均整流 (Io): 2A
电压 - 在 If 时为正向 (Vf)(最大): 530mV @ 2A
速度: 快速恢复 =< 500 ns,> 200mA(Io)
电流 - 在 Vr 时反向漏电: 150µA @ 60V
电容@ Vr, F: 240pF @ 1V,1MHz
安装类型: 表面贴装
封装/外壳: SOD-123W
供应商设备封装: SOD123W
包装: 标准包装
其它名称: 568-6529-6
PMEG6020ER_1 All information provided in this document is subject to legal disclaimers. ? NXP B.V. 2010. All rights reserved.
Product data sheet Rev. 01 — 3 March 2010 12 of 14
NXP Semiconductors
PMEG6020ER
2 A low VF
MEGA Schottky barrier rectifier
13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ
in case of multiple device
s. The latest product status
information is available on the Internet at URL
http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale
of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in
this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on a weakness or default in the
customer application/use or the application/use of customer’s third party
customer(s) (hereinafter both referred to as “Application”). It is customer’s
sole responsibility to check whether the NXP Semiconductors product is
suitable and fit for the Application planned. Customer has to do all necessary
testing for the Application in order to avoid a default of the Application and the
product. NXP Semiconductors does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values
and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
applications. The product is not designed, authorized or warranted to be
suitable for use in medical, military, aircraft, space or life support equipment,
nor in applications where failure or malfunction of an NXP Semiconductors
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. NXP Semiconductors accepts no
liability for inclusion and/or use of NXP Semiconductors products in such
equipment or applications and therefore such inclusion and/or use is at the
customer’s own risk.
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet Development This
document contains data from the objecti
ve specification for product development.
Preliminary [short] data sheet Qualification This document
contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
相关PDF资料
PDF描述
PMEG6030EP,115 DIODE SCHOTTKY 60V 3A SOD128
PMLL4448,115 DIODE SW GPP 75V 200MA SOD80C
PR1005-T DIODE FAST REC 1A 600V DO-41
PR1006G-T DIODE FAST REC 1A 800V DO-41
PR1506GS-T DIODE FAST REC 1.5A 800V DO-41
相关代理商/技术参数
参数描述
PMEG6020ETP 制造商:NXP Semiconductors 功能描述:DIODE SCHOTTKY 2A 60V SOD128 制造商:NXP Semiconductors 功能描述:DIODE, SCHOTTKY, 2A, 60V, SOD128 制造商:NXP Semiconductors 功能描述:DIODE, SCHOTTKY, 2A, 60V, SOD128, Diode Type:Ultrafast Recovery, Diode Configura
PMEG6020ETP,115 制造商:NXP Semiconductors 功能描述:Diode Schottky 60V 2.8A 2-Pin SOD-128 T/R 制造商:NXP Semiconductors 功能描述:PMEG6020ETP/FLATPOWER/REEL7// - Tape and Reel 制造商:NXP Semiconductors 功能描述:DIODE SCHOTTKY 60V 2A FLATPOWER
PMEG6020ETR 制造商:NXP Semiconductors 功能描述:DIODE, SCHOTTKY, 2A, 60V, SOD123; Diode Type:Ultrafast Recovery; Diode Configuration:Single; Repetitive Reverse Voltage Vrrm Max:60V; Forward Current If(AV):2A; Forward Voltage VF Max:530mV; Reverse Recovery Time trr Max:8.5ns; ;RoHS Compliant: Yes
PMEG6020ETR,115 制造商:NXP Semiconductors 功能描述:Diode Schottky 60V 2.8A 2-Pin SOD-123W T/R 制造商:NXP Semiconductors 功能描述:PMEG6020ETR/SOD2/REEL7// - Tape and Reel 制造商:NXP Semiconductors 功能描述:DIODE SCHOTTKY 60V 2A SOD123W
PMEG6030ELPX 功能描述:DIODE SCHOTTKY 60V 3A SOD128 制造商:nexperia usa inc. 系列:汽车级,AEC-Q101 包装:剪切带(CT) 零件状态:在售 二极管类型:肖特基 电压 - DC 反向(Vr)(最大值):60V 电流 - 平均整流(Io):3A 不同 If 时的电压 - 正向(Vf:670mV @ 3A 速度:快速恢复 = 200mA(Io) 反向恢复时间(trr):12ns 不同?Vr 时的电流 - 反向漏电流:1000nA @ 60V 不同?Vr,F 时的电容:315pF @ 1V,1MHz 安装类型:表面贴装 封装/外壳:SOD-128 供应商器件封装:CFP5 工作温度 - 结:175°C(最大) 标准包装:1