参数资料
型号: PMH8918LSR
厂商: ERICSSON POWER MODULES AB
元件分类: 电源模块
英文描述: 1-OUTPUT 90 W DC-DC REG PWR SUPPLY MODULE
封装: ROHS COMPLIANT, PACKAGE-10
文件页数: 32/47页
文件大小: 936K
代理商: PMH8918LSR
Ericsson Internal
PRODUCT SPEC.
1 (5)
Prepared (also subject responsible if other)
No.
SEC/D KEVIN YAN
3/1301-BMR 645 8 Uen
Approved
Checked
Date
Rev
Reference
SEC/D Wei Zhang A
2006-2-8
A
EMC Specification
Conducted EMI measured according to test set-up.
The fundamental switching frequency is 320 kHz for PMH
8918L @ VI = 12 V, max IO and 250 kHz for PMH 8318T @ VI =
12 V, max IO.
Conducted EMI Input terminal value (typ)
TBD
EMI without filter
TBD
Test set-up
Layout recommendation
The radiated EMI performance of the DC/DC regulator will
depend on the PCB layout and ground layer design.
It is also important to consider the stand-off of the DC/DC
regulator.
If a ground layer is used, it should be connected to the output
of the DC/DC regulator and the equipment ground or chassis.
A ground layer will increase the stray capacitance in the PCB
and improve the high frequency EMC performance.
Output ripple and noise
Output ripple and noise measured according to figure below.
See Design Note 022 for detailed information.
Output ripple and noise test setup
Operating information
Extended information for POLA products is found in
Application Note POLA.
Input Voltage
The input voltage range 10.8 to 13.2 Vdc makes the product
easy to use in intermediate bus applications when powered
by a regulated bus converter.
Turn-off Input Voltage
The DC/DC regulators monitor the input voltage and will turn
on and turn off at predetermined levels.
The minimum hysteresis between turn on and turn off input
voltage is 50mV.
Remote Control (RC) Inhibit
The products are fitted with a
remote control function referenced
to the primary negative input
connection (- In), positive logic. The
INHIBIT function allows the
regulator to be turned on/off by an
external device like a
semiconductor or mechanical
switch. The INHIBIT pin has an
internal pull up resistor to + In.
The regulator will turn on when the input voltage is applied
with the INHIBIT pin open. Turn off is achieved by connecting
the INHIBIT pin to the - In. To ensure safe turn off, the voltage
difference between INHIBIT pin and the - In pin shall be less
than 0.6V. The regulator will restart automatically when this
connection is opened.
E
PMH 8000 series
POL regulator, Input 10.8-13.2 V, Output 18 A/99 W
EN/LZT 146 324 R1B February 2006
Ericsson Power Modules AB
Technical Specication
E
PMH 8000 series
POL regulator, Input 10.8-13.2 V, Output 18 A/99 W
EN/LZT 146 324 R1B April 2006
Ericsson Power Modules AB
Technical Specication
38
相关PDF资料
PDF描述
PMH8918LP 1-OUTPUT 90 W DC-DC REG PWR SUPPLY MODULE
PMJ8118LP 1-OUTPUT 143 W DC-DC REG PWR SUPPLY MODULE
PMJ8118LS 1-OUTPUT 143 W DC-DC REG PWR SUPPLY MODULE
PMJ8118LSR 1-OUTPUT 143 W DC-DC REG PWR SUPPLY MODULE
PMR5118UWP/B DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
PMH8918LSR/B 制造商:Ericsson 功能描述:
PM-H922LC 制造商:未知厂家 制造商全称:未知厂家 功能描述:0-5Vdc Current transducer
PMHA10049884 制造商:Fairchild Semiconductor Corporation 功能描述:
PMH-AD07RPVWD 制造商:TDK-Lambda Corporation 功能描述:Module DC-DC 1-OUT 0.75V to 5.5V 7A 35W 5-Pin SMD Bulk
PMHD155A1 制造商:Honeywell Sensing and Control 功能描述: