Ericsson Internal
PRODUCT SPECIFICATION
5 (7)
Prepared (also subject responsible if other)
No.
SEC/D EPANHON
4/1301-BMR 645
Approved
Checked
Date
Rev
Reference
SEC/D (Linda Zhong)
See end
2006-2-14
B
Delivery package information for SMD
The products are delivered in antistatic trays (Jedec standard)
or in antistatic carrier tape (EIA standard).
Tray specifications
Material
PET
Surface resistance
10E3 to 10E5 ohms/square
Bake ability
The trays can not be baked.
Tray capacity
20 products /tray
Box capacity
100 products/box)
Weight
220 g/full tray
Carrier tape specifications
Material
Polystyrene
Surface resistance
< 10E5 ohms/square
Bake ability
The tape can not be baked.
Tape width
56 mm [2.205 inch]
Pocket pitch
32 mm [1.26 inch]
Pocket depth
9.57 mm [0.377 inch]
Reel diameter
380 mm [15 inch]
Reel capacity
200 products /reel
Box capacity
200 products (1 reels/box)
Weight
2.0 kg/full reel
Dry pack information
The products are delivered in trays or tape & reel. These inner
shipment containers are dry packed in standard moisture
barrier bags according to IPC/JEDEC standard J-STD-033A
(Handling, packing, shipping and use of moisture/reflow
sensitivity surface mount devices).
Using products in high temperature Pb-free soldering
processes requires dry pack storage and handling. In case
the products have been stored in an uncontrolled
environment and no longer can be considered dry, the
modules must be baked according to the referred IPC/JEDEC
standard.
Tape feed directions
Elongated holes
Round holes
E
PMH 8000 series
POL regulator, Input 10.8-13.2 V, Output 18 A/99 W
EN/LZT 146 324 R1B February 2006
Ericsson Power Modules AB
Technical Specication
E
PMH 8000 series
POL regulator, Input 10.8-13.2 V, Output 18 A/99 W
EN/LZT 146 324 R1B April 2006
Ericsson Power Modules AB
Technical Specication
46