参数资料
型号: PowerPC 440
厂商: IBM Microeletronics
英文描述: 32-bit RISC PowerPC Embedded Processor Cores(32位 RISC PowerPC 嵌入式处理器)
中文描述: 32位RISC PowerPC嵌入式处理器内核(RISC的32位的PowerPC嵌入式处理器)
文件页数: 6/18页
文件大小: 317K
代理商: POWERPC 440
PowerPC 440 Core
09/21/1999
Page 6 of 18
instructions are stored, which gives a significant performance boost while keeping the design
straightforward.
Decode and Issue
The four-entry decode queue accepts up to two instructions per clock
submitted
from the pre-decode
buffers. Instructions always enter the lowest empty or emptying queue position, behind any instructions
already in the queue. Therefore, the queue fills from the bottom up, instructions stay in order, and no
bubbles exist in the queue. A significant portion of decode is performed in the lowest two positions
(DISS0 and DISS1). Up to two instructions exit the queue based on the instructions’ decode and pipeline
availability, and are
issued
to the RACC stage. DISS1 can issue out of order with respect to DISS0.
Register Access
Conceptually, the GPR file consists of thirty-two, 32-bit general purpose registers. It is implemented as
two 6-port arrays, (one array for LRACC, one for IRACC) each with thirty-two, 32-bit registers
containing three write ports and three read ports. On all GPR updating instructions, the appropriate GPR
write ports will be written in order to keep the contents of the files the same. On GPR reads, however, the
GPR read ports are dedicated to instructions that are
dispatched
to a RACC’s associated pipe(s).
Execution Pipelines
The PPC440 contains three execution pipes: a load/store pipe (“L-pipe”), a simple integer pipe (“J-pipe”),
and a complex integer pipe (“I-pipe”). The L-pipe and J-pipe instructions are dispatched from the
LRACC; I-pipe instructions are dispatched from IRACC. The three pipes together perform all 32-bit
PowerPC integer instructions in hardware compliant with the PowerPC Book E specification. Table 2
lists the rules for dispatching to each of the three execution pipes.
L-pipe only
I-pipe or J-
pipe
2
I-pipe only
Loads/stores
1
, cache instructions, mbar, msync
Add, addi, addis, and, andc, cntlzw, eqv, extsb, extsh, nand, neg, nor, or, orc,
ori, oris, xori, xoris, rlwimi, rlwinm, rlwnm, slw, srw, subf
Branches, multiplies, divides, move to/from DCR/SPR, indirect XER updates,
indirect LR/CTR updates, indirect CR updates, CR-logicals, MAC instructions,
mcrf, mcrxr, mtcrf, mfcr, compares, dlmzb, isync, rfi, rfci, sc, wrtee, wrteei,
mtmsr, mfmsr, traps
Table 2 – Rules for Instruction Issue
The MAC unit is an auxiliary processor unit (APU) which adds 24 operations to the PPC440 instruction
set. MAC instructions operate on either signed or unsigned 16 bit operands and accumulate the results in
a 32-bit GPR. All MAC unit instructions have single cycle throughput. The MAC unit is contained
within the I-pipe.
1
The stwcx. instruction goes down both the L-pipe as well as the I-pipe, in order to update the CR.
2
Instructions which update the CR or XER are not issued to the J-pipe.
相关PDF资料
PDF描述
PowerPC 602 32-bit implementation Reduced Instruction Set Computer (RISC) Microprocessors.(32位精简指令集微处理器)
PowerPC 603e 32-Bit PowerPC Reduced Instruction Set Computer (RISC) Microprocessor(32-位 PowerPC 精简指令集微处理器)
PowerPC EM603e 32-Bit PowerPC Reduced Instruction Set Computer (RISC) Microprocessor(32-位 PowerPC 精简指令集微处理器)
PowerPC 740 32-Bit Embedded Microprocessor(32位精简指令集嵌入式微处理器)
PowerPC 750CX 32-Bit Reduced Instruction Set Computer (RISC) Microprocessors(32位精简指令集微处理器)
相关代理商/技术参数
参数描述
POWERPLUG15W 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:AC/DC POWER SUPPLY
POWERPLUG24W 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:AC/DC POWER SUPPLY
POWERPLUS 2C 2500MAH 制造商:Energizer Battery Company 功能描述:
POWERPLUS 2D 2500MAH 制造商:Energizer Battery Company 功能描述:
POWERPLUS 4AAA 850MAH 制造商:Energizer Battery Company 功能描述: