- 您现在的位置：买卖IC网 > PDF目录69064 > PQ24033QGA25NKS (SYNQOR INC) 1-OUTPUT 82.5 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PQ24033QGA25NKS |
| 厂商： | SYNQOR INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 82.5 W DC-DC REG PWR SUPPLY MODULE |
| 文件页数： | 13/13页 |
| 文件大小： | 574K |
| 代理商： | PQ24033QGA25NKS |
Input:
Output:
Current:
PPackage:
ackage:
18-36 V
3.3 V
25 A
25 A (82.5W)
(82.5W)
Quarter-brick
T
Technical S
echnical Specification
pecification
Product # PQ24033QGA25
Phone 1-888-567-9596
Doc.# 005-2QG233D Rev. B
08/17/06
Page 9
BASIC OPERATION AND FEATURES
The PowerQor series converter uses a two-stage power conver-
sion topology. The first stage is a buck-converter that keeps the
output voltage constant over variations in line, load, and temper-
ature. The second stage uses a transformer to provide the func-
tions of input/output isolation and voltage step-down to achieve
the low output voltage required.
Both the first stage and the second stage switch at a fixed fre-
quency for predictable EMI performance. Rectification of the
transformer’s output is accomplished with synchronous rectifiers.
These devices, which are MOSFETs with a very low on-state resis-
tance, dissipate far less energy than Schottky diodes. This is the
primary reason that the PowerQor converter has such high effi-
ciency, even at very low output voltages and very high output cur-
rents.
Dissipation throughout the converter is so low that it does not
require a heatsink for operation. Since a heatsink is not required,
the PowerQor converter does not need a metal baseplate or pot-
ting material to help conduct the dissipated energy to the
heatsink. The PowerQor converter can thus be built more simply
and reliably using high yield surface mount techniques on a PCB
substrate.
The PowerQor series of half-brick and quarter-brick converters
uses the industry standard footprint and pin-out configuration.
CONTROL FEATURES
REMOTE ON/OFF (Pin 2): The ON/OFF input, Pin 2, permits
the user to control when the converter is on or off. This input is
referenced to the return terminal of the input bus,
Vin(-). There
are two versions of the converter that differ by the sense of the
logic used for the ON/OFF input.
In the positive logic version, the ON/OFF input is active high
(meaning that a high turns the converter on). In the negative logic
version, the ON/OFF signal is active low (meaning that a low
turns the converter on). Figure A details five possible circuits for
driving the ON/OFF pin. Figure B is a detailed look of the inter-
nal ON/OFF circuitry.
REMOTE SENSE(+) (Pins 7 and 5): The SENSE(+) inputs cor-
rect for voltage drops along the conductors that connect the con-
verter’s output pins to the load.
Pin 7 should be connected to Vout(+) and Pin 5 should be con-
nected to Vout(-) at the point on the board where regulation is
desired. A remote connection at the load can adjust for a voltage
drop only as large as that specified in this datasheet, that is
[Vout(+) - Vout(-)] – [Vsense(+) - Vsense(-)] <
Sense Range % x Vout
Pins 7 and 5 must be connected for proper regulation of the out-
put voltage. If these connections are not made, the converter will
deliver an output voltage that is slightly higher than its specified
value.
Note: the output over-voltage protection circuit senses the voltage
Open Collector Enable Circuit
Figure A: Various circuits for driving the ON/OFF pin.
Figure B: Internal ON/OFF pin circuitry
Remote Enable Circuit
Direct Logic Drive
Negative Logic
(Permanently Enabled)
Positive Logic
(Permanently Enabled)
ON/OFF
Vin(_
)
ON/OFF
Vin(_
)
ON/OFF
5V
TTL/
CMOS
Vin(_
)
ON/OFF
Vin(_)
Vin(_
)
TTL
5V
50k
100k
Vin(+)
ON/OFF
Vin(_)
50k
100pF
相关PDF资料 |
PDF描述 |
|---|---|
| PQ24033QGA25NNS-G | 1-OUTPUT 82.5 W DC-DC REG PWR SUPPLY MODULE |
| PQ24033QGA25NYS | 1-OUTPUT 82.5 W DC-DC REG PWR SUPPLY MODULE |
| PQ24033QGA25PKS-G | 1-OUTPUT 82.5 W DC-DC REG PWR SUPPLY MODULE |
| PQ24033QGL25NNS | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PQ24033QGL25PNS | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PQ24033QGA25NNS | 制造商:SYNQOR 制造商全称:SYNQOR 功能描述:Quarter-brick DC/DC Converter |
| PQ24033QGA25NNS-G | 制造商:SynQor 功能描述:Module DC-DC 1-OUT 3.3V 25A 8-Pin Quarter-Brick |
| PQ24033QGA25NRS | 制造商:SYNQOR 功能描述:DC TO DC CONVERTER MODULE |
| PQ24033QGA25NYS | 制造商:SYNQOR 制造商全称:SYNQOR 功能描述:Quarter-brick DC/DC Converter |
| PQ24033QGA25PKS | 制造商:SYNQOR 制造商全称:SYNQOR 功能描述:Quarter-brick DC/DC Converter |
发布紧急采购，3分钟左右您将得到回复。