参数资料
| 型号： | PS8551L4-AX |
| 厂商： | CEL |
| 文件页数： | 7/18页 |
| 文件大小： | 0K |
| 描述： | ISOLATOR AMP ANALOG 5KRMS 8MD |
| 标准包装： | 50 |
| 放大器类型： | 隔离 |
| 电路数： | 1 |
| 输出类型： | 差分 |
| -3db带宽： | 100kHz |
| 电流 - 输入偏压： | 500nA |
| 电压 - 输入偏移： | 300µV |
| 电流 - 电源： | 16mA |
| 电流 - 输出 / 通道： | 18.6mA |
| 电压 - 电源，单路/双路(±)： | 4.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SMD，鸥翼型 |
| 供应商设备封装： | 8-SMD 鸥翼型 |
| 包装： | 管件 |
PS8551L4
Chapter Title
7
1
f
o
5
1
e
g
a
P
0
.
2
.
v
e
R
0
2
0
J
E
9
3
0
S
D
8
0
R
Sep 06, 2011
(4) Cautions
Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output
transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. Board designing
(1) By-pass capacitor of more than 0.1 μF is used between VCC and GND near device. Also, ensure that the
distance between the leads of the photocoupler and capacitor is no more than 10 mm.
(2) Keep the pattern connected the input (VIN+, VIN) and the output (VOUT+, VOUT), respectively, as short as
possible.
(3) Do not connect any routing to the portion of the frame exposed between the pins on the package of the
photocoupler. If connected, it will affect the photocoupler's internal voltage and the photocoupler will not
operate normally.
(4) Because the maximum frequency of the signal input to the photocoupler must be lower than the allowable
frequency band, be sure to connect an anti-aliasing filter (an RC filter with R = 68 Ω and C = 0.01 μF, for
example).
(5) The signals output from the PS8551 include noise elements such as chopping noise and quantization noise
generated internally. Therefore, be sure to restrict the output frequency to the required bandwidth by adding a
low-pass filter function (an RC filter with R =10 kΩ and C = 150 pF, for example) to the operational amplifier
(post amplifier) in the next stage to the PS8551.
3. Avoid storage at a high temperature and high humidity.
A Business Partner of Renesas Electronics Corporation.
相关PDF资料 |
PDF描述 |
|---|---|
| 172129-9 | CONN TAB HSG 2POS .250 RED |
| OP400GS | IC OPAMP GP 500KHZ QUAD 16SOIC |
| 172129-5 | CONN TAB HSG 2POS .250 BLUE |
| 926142-01-07-I | CONN HEADER 14POS DL .100 GOLD |
| MTMM-104-11-G-D-295 | CONN HEADER 8POS 2MM DL GOLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS8551L4-E3 | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:ANALOG OUTPUT TYPE OPTICAL COUPLED ISOLATION AMPLIFIER |
| PS8551L4-E3-AX | 功能描述:ISOLATOR AMP ANALOG 5KRMS 8SMD RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:150 系列:- 放大器类型:音频 电路数:2 输出类型:- 转换速率:5 V/µs 增益带宽积:12MHz -3db带宽:- 电流 - 输入偏压:100nA 电压 - 输入偏移:500µV 电流 - 电源:6mA 电流 - 输出 / 通道:50mA 电压 - 电源，单路/双路(±):4 V ~ 32 V，±2 V ~ 16 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:8-TSSOP 包装:管件 |
| PS8551L4-V | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:ANALOG OUTPUT TYPE OPTICAL COUPLED ISOLATION AMPLIFIER |
| PS8551L4-V-AX | 功能描述:ISOLATOR AMP ANALOG 5KRMS 8SMD RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:Excalibur™ 放大器类型:J-FET 电路数:1 输出类型:- 转换速率:45 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:20pA 电压 - 输入偏移:490µV 电流 - 电源:1.7mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):4.5 V ~ 38 V，±2.25 V ~ 19 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
| PS8551L4-V-E3 | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:ANALOG OUTPUT TYPE OPTICAL COUPLED ISOLATION AMPLIFIER |
发布紧急采购，3分钟左右您将得到回复。