- 您现在的位置：买卖IC网 > PDF目录21600 > PS9552L2-E3-AX (CEL)ISOLATOR 5KVRMS 1CH GATE 8DIP PDF资料下载
参数资料
| 型号： | PS9552L2-E3-AX |
| 厂商： | CEL |
| 文件页数： | 19/22页 |
| 文件大小： | 0K |
| 描述： | ISOLATOR 5KVRMS 1CH GATE 8DIP |
| 产品目录绘图： | Dual Output Pin Out |
| 标准包装： | 1,000 |
| 系列： | NEPOC |
| 电压 - 隔离： | 5000Vrms |
| 通道数： | 1，单向 |
| 电流 - 输出 / 通道： | 2.5A |
| 传输延迟高 - 低 @ 如果： | 300ns @ 7mA ~ 16mA |
| 电流 - DC 正向(If)： | 16mA |
| 输入类型： | DC |
| 输出类型： | 栅极驱动器 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SMD，鸥翼型 |
| 供应商设备封装： | 8-SMD 鸥翼型 |
| 包装： | 带卷 (TR) |
PS9552,PS9552L1,PS9552L2,PS9552L3
(4) Cautions
? Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the
output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. Board designing
(1) By-pass capacitor of more than 0.1 F is used between V CC and GND near device. Also, ensure that the
distance between the leads of the photocoupler and capacitor is no more than 10 mm.
(2) In older to avoid malfunctions and characteristics degradation, IGBT collector or emitter traces should not
be closed to the LED input.
<R>
(3) Pins 1, 4 (which is an NC
open.
*1
pin) can either be connected directly to the GND pin on the LED side or left
Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this
may degrade the internal noise environment of the device.
*1 NC: Non-Connection (No Connection)
3. Make sure the rise/fall time of the forward current is 0.5 s or less.
4. In order to avoid malfunctions, make sure the rise/fall slope of the supply voltage is 3 V/ s or less.
5. Avoid storage at a high temperature and high humidity.
Data Sheet PN10589EJ07V0DS
19
相关PDF资料 |
PDF描述 |
|---|---|
| LPS0300H4700JB | RESISTOR HEAT SINK 470 OHM 300W |
| LPS0300H10R0JB | RESISTOR HEAT SINK 10.0 OHM 300W |
| LPS0300H4R70JB | RESISTOR HEAT SINK 4.7 OHM 300W |
| LPS0300H1R00JB | RESISTOR HEAT SINK 1.0 OHM 300W |
| 15-43-8541 | CONN MODULAR JACK RT/ANG 4-2 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS9552L2-V | 制造商:NEC 制造商全称:NEC 功能描述:2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER |
| PS9552L2-V-AX | 制造商:NEC 制造商全称:NEC 功能描述:2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER |
| PS9552L2-V-E3 | 制造商:NEC 制造商全称:NEC 功能描述:2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER |
| PS9552L2-V-E3-AX | 制造商:NEC 制造商全称:NEC 功能描述:2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER |
| PS9552L3 | 制造商:NEC 制造商全称:NEC 功能描述:2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER |
发布紧急采购，3分钟左右您将得到回复。