参数资料
型号: PT4800E0000F
厂商: Sharp Microelectronics
文件页数: 7/9页
文件大小: 0K
描述: PHOTO TRANS CLEAR LEN 800NM SIDE
标准包装: 50
系列: *
电压 - 集电极发射极击穿(最大): 35V
电流 - 集电极 (Ic)(最大): 20mA
电流 - 暗 (Id)(最大): 100µA
波长: 800nm
视角: 70°
功率 - 最大: 75mW
安装类型: 通孔
方向: 侧视图
封装/外壳: 径向
其它名称: 425-2377-5
PT4800E0000F
■ Design Notes
1. This product is not designed to resist electromagnetic and ionized-particle radiation.
■ Manufacturing Guidelines
● Soldering Instructions
1. Sharp does not recommend soldering this part using preheat or solder reflow methods. Leads on this part are
pre-coated with lead-free solder.
2. If hand soldering, use temperatures ≤ 260°C for ≤ 3 seconds.
3. When mounting this device, care should be taken to prevent any boundary exfoliation (pad lifting) between the
solder, the pad, and the circuit board.
4. Do not subject the package to excessive mechanical force during soldering as it may cause deformation or
defects in plated connections. Internal connections may be severed due to mechanical force placed on the pack-
age due to the PCB flexing during the soldering process.
● Cleaning Instructions
1. Confirm this device's resistance to process chemicals before use, as certain process chemicals may affect the
optical characteristics.
2. Solvent cleaning: Solvent temperature should be 45°C or below. Immersion time should be 3 minutes or less.
3. Ultrasonic cleaning: The effect upon devices varies due to cleaning bath size, ultrasonic power output, cleaning
time, PCB size and device mounting circumstances. Sharp recommends testing using actual production condi-
tions to confirm the harmlessness of the ultrasonic cleaning methods.
4. Recommended solvent materials: Ethyl alcohol, Methyl alcohol, and Isopropyl alcohol.
■ Presence of ODCs (RoHS Compliance)
This product shall not contain the following materials, and they are not used in the production process for this product:
? Regulated substances: CFCs, Halon, Carbon tetrachloride, 1,1,1-Trichloroethane (Methylchloroform). Specific
brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).
? Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl
ethers (PBDE).
? Content information about the six substances specified in “Management Methods for Control of Pollution
Caused by Electronic Information Products Regulation” (Chinese: )
Toxic and Hazdardous Substances
Category
Lead (Pb) mercury (Hg) Cadmium (Cd)
Hexavalent
chromiun (Cr 6+ )
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl ethers
(PBDE)
Photo Transistor
?
?
?
?
?
?
NOTE: ? indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part is below the concentration limit requirement
as described in SJ/T 11363-2006 standard.
Sheet No.: D1-A02101EN
7
相关PDF资料
PDF描述
PT4800FE000F PHOTO TRANS BLACK LEN 860NM SIDE
PT480E00000F PHOTO TRANS CLEAR LEN 800NM SIDE
PT480FE0000F PHOTO TRANS BLACK LEN 860NM SIDE
PT481E00000F PHOTO TRANS BLUE LEN 800NM SIDE
PT481FE0000F PHOTO TRANS BLACK LEN 860NM SIDE
相关代理商/技术参数
参数描述
PT4800F 功能描述:PHOTO TRANS BLACK LEN 860NM SIDE RoHS:否 类别:传感器,转换器 >> 光学 - 光电检测器 - 光电晶体管 系列:* 标准包装:1,200 系列:- 电压 - 集电极发射极击穿(最大):30V 电流 - 集电极 (Ic)(最大):1mA 电流 - 暗 (Id)(最大):100nA 波长:880nm 视角:24° 功率 - 最大:100mW 安装类型:通孔 方向:顶视图 封装/外壳:径向
PT4800FB 功能描述:PHOTO TRANS BLACK LEN 860NM SIDE RoHS:否 类别:传感器,转换器 >> 光学 - 光电检测器 - 光电晶体管 系列:* 标准包装:1,200 系列:- 电压 - 集电极发射极击穿(最大):30V 电流 - 集电极 (Ic)(最大):1mA 电流 - 暗 (Id)(最大):100nA 波长:880nm 视角:24° 功率 - 最大:100mW 安装类型:通孔 方向:顶视图 封装/外壳:径向
PT4800FBE00F 功能描述:光电晶体管 PT4800F with Ic bin 0.15-0.38mA RoHS:否 制造商:OSRAM Opto Semiconductors 最大功率耗散:165 mW 最大暗电流:200 nA 封装 / 箱体:T-1
PT4800FE000F 功能描述:光电晶体管 BLACK LENS 860NM RoHS:否 制造商:OSRAM Opto Semiconductors 最大功率耗散:165 mW 最大暗电流:200 nA 封装 / 箱体:T-1
PT4801 制造商:未知厂家 制造商全称:未知厂家 功能描述:25-Watt Triple Output 48V-Input Isolated DC/DC Converter for DSL