- 您现在的位置：买卖IC网 > Datasheet目录501 > PT534-6B (Everlight Electronics Co Ltd)PHOTOTRANSISTOR 5MM BLACK RAD Datasheet资料下载
参数资料
| 型号： | PT534-6B |
| 厂商： | Everlight Electronics Co Ltd |
| 文件页数： | 8/9页 |
| 文件大小： | 0K |
| 描述： | PHOTOTRANSISTOR 5MM BLACK RAD |
| 标准包装： | 500 |
| 电压 - 集电极发射极击穿（最大）： | 30V |
| 电流 - 集电极 (Ic)（最大）： | 20mA |
| 电流 - 暗 (Id)（最大）： | 100nA |
| 波长： | 980nm |
| 安装类型： | 通孔 |
| 方向： | 顶视图 |
| 封装/外壳： | 径向，5mm 直径（T 1 3/4） |
| 其它名称： | 1080-1160 |
DATASHEET
5mm Silicon Phototransistor
PT534-6B
Notes
1.
Lead Forming
?
?
?
?
?
During lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb.
Lead forming should be done before soldering.
Avoid stressing the LED package during leads forming. The stress to the base may damage the LED’s characteristics or it
may break the LEDs.
Cut the LED lead frames at room temperature. Cutting the lead frames at high temperatures may cause failure of the LEDs.
When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead position of the LED. If the LEDs
are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the LEDs.
2.
Storage
?
?
The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from Everlight and the storage life limits
are 3 months. If the LEDs are stored for 3 months or more, they can be stored for a year in a sealed container with a
nitrogen atmosphere and moisture absorbent material.
Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can
occur.
3.
Soldering
?
?
Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to epoxy bulb,
and soldering beyond the base of the tie bar is recommended.
Recommended soldering conditions:
Hand Soldering
DIP Soldering
Temp. at tip of iron
Soldering time
Distance
300 ℃ Max. (30W Max.)
3 sec Max.
3mm Min.(From solder
joint to epoxy bulb)
Preheat temp.
Bath temp. & time
Distance
100 ℃ Max. (60 sec Max.)
260 Max., 5 sec Max
3mm Min. (From solder
joint to epoxy bulb)
?
?
?
Recommended soldering profile
laminar wave
Fluxing
Prehead
Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering.
Dip and hand soldering should not be done more than one time
8
www.everlight.com
:3
Revision Copyright ?
LifecyclePhase:
No: Release
2010, Everlight All Rights Reserved. Release Date : May.28.2013. Issue DPT-0000049 Date:2013-06-04 10:05:52.0
Expired Period: Forever
相关PDF资料 |
PDF描述 |
|---|---|
| PT5529B/L2-F | PHOTOTRANSISTOR SIDE BLACK RAD |
| PT5529B/L2/H2-F | PHOTOTRANSISTOR SIDE BLACK RAD |
| PT67-21B/C14/TR8 | PHOTOTRANSISTOR TOP NPN BK SMD |
| PT67-21C/L41/TR8 | PHOTOTRANSISTOR TOP NPN CLR SMD |
| PT908-7B-F | PHOTOTRANSISTOR 1.5MM SIDE BLACK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PT5362-BKSP | 制造商:Pass & Seymour/Legrand 功能描述:PT SPD RECP 20A/125V ALARM BK |
| PT539-1 | 功能描述:固定电感器 220NETICS - ADSL RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| PT539-1L | 制造商:Bourns / JW Miller 功能描述:Telecom Transformer 1:1 1500Vrms 3Ohm Prim. DCR 3Ohm Sec. DCR <0.5dB Through Hole 制造商:Bourns Inc 功能描述:RF TX 3OHM PRIM. DCR 5000UH PRIM. INDUCTANCE 3OHM SEC. DCR 5 - Bulk 制造商:Bourns Inc 功能描述:Telecom Transformer 1:1 1500Vrms 3Ohm Prim. DCR 3Ohm Sec. DCR <0.5dB Through Hole |
| PT53WX42F-SM | 制造商:Panasonic Industrial Company 功能描述:PANASONIC SERVICE MANUAL |
| PT5401 | 制造商:TI 制造商全称:Texas Instruments 功能描述:6-A 5-V/3.3-V Input Adjustable SWIFT Power Module |
发布紧急采购，3分钟左右您将得到回复。