- 您现在的位置：买卖IC网 > PDF目录98066 > PTV03020WAH (TEXAS INSTRUMENTS INC) 1-OUTPUT DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PTV03020WAH |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 封装： | SIP-12 |
| 文件页数： | 4/19页 |
| 文件大小： | 434K |
| 代理商： | PTV03020WAH |
www.ti.com
t-Time=5ms/div
Q1V
(5V/div)
DS
I (5 A/div)
I
V (1V/div)
O
Overcurrent Protection (OCP)
Overtemperature Protection (OTP)
Auto-Track Function
SLTS243A – FEBRUARY 2005 – REVISED OCTOBER 2007
Figure 10. Inhibit Waveform
For protection against load faults, the modules incorporate output overcurrent protection. Applying a load that
exceeds the overcurrent threshold causes the regulated output to shut down. Following shutdown, a module
periodically attempts to recover by initiating a soft-start power up. This is described as a hiccup mode of
operation, whereby the module continues in the cycle of successive shutdown and power up until the load fault is
removed. During this period, the average current flowing into the fault is significantly reduced. Once the fault is
removed, the module automatically recovers and returns to normal operation.
An onboard temperature sensor protects the module internal circuitry against excessively high temperatures. A
rise in the internal temperature may be the result of a drop in airflow or a high ambient temperature. If the
internal temperature exceeds the OTP threshold, the module Inhibit control is internally pulled low. This turns the
output off. The output voltage drops as the external output capacitors are discharged by the load circuit. The
recovery is automatic, and begins with a soft-start power up. It occurs when the sensed temperature decreases
by about 10C below the trip point.
Note: The overtemperature protection is a last resort mechanism to prevent thermal stress to the regulator.
Operation at or close to the thermal shutdown temperature is not recommended and reduces the long-term
reliability of the module. Always operate the regulator within the specified Safe Operating Area (SOA) limits for
the worst-case conditions of ambient temperature and airflow.
The Auto-Track function is unique to the PTH/PTV family, and is available with all POLA products. Auto-Track
was designed to simplify the amount of circuitry required to make the output voltage from each module power up
and power down in sequence. The sequencing of two or more supply voltages during power up is a common
requirement for complex mixed-signal applications that use dual-voltage VLSI ICs such as the TMS320 DSP
family, microprocessors, and ASICs.
How Auto-Track Works
Auto-Track works by forcing the module output voltage to follow a voltage presented at the Track control pin (1).
This control range is limited to between 0 V and the module set-point voltage. Once the track-pin voltage is
raised above the set-point voltage, the module output remains at its set-point (2). As an example, if the Track pin
of a 2.5-V regulator is at 1 V, the regulated output is 1 V. If the voltage at the Track pin rises to 3 V, the regulated
output does not go higher than 2.5 V.
Under Auto-Track control, the regulated output from the module follows the voltage at its Track pin on a
12
Copyright 2005–2007, Texas Instruments Incorporated
Product Folder Link(s) :PTV03020W
相关PDF资料 |
PDF描述 |
|---|---|
| PTV05010WAH | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PTV08T250WAH | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PTV08T250WAD | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PTV12010WAD | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PTV12010WAH | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PTV05010 | 制造商:ARTESYN 制造商全称:Artesyn Technologies 功能描述:DC-DC CONVERTERS POLA Non-isolated |
| PTV05010W | 制造商:TI 制造商全称:Texas Instruments 功能描述:8-A, 5-V INPUT NONISOLATED WIDE-OUTPUT ADJUST SIP MODULE |
| PTV05010WAD | 功能描述:DC/DC转换器 28.8W 0.8-3.6V 8A RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PTV05010WAH | 功能描述:DC/DC转换器 8A 5V-In Wide-Out Adj SIP Module RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PTV05020 | 制造商:EMERSON-NETWORKPOWER 制造商全称:Emerson Network Power 功能描述:DC-DC CONVERTERS |
发布紧急采购，3分钟左右您将得到回复。