![](http://datasheet.mmic.net.cn/120000/R5F21388WJFP_datasheet_3573607/R5F21388WJFP_2.png)
R8C/38W Group, R8C/38X Group, R8C/38Y Group, R8C/38Z Group
1. Overview
Under development Preliminary document
Specifications in this document are tentative and subject to change.
REJ03B0317-0010 Rev.0.10
May 31, 2010
1.1.2
Specifications
Tables
1.1 and
1.2 outline the Specifications for R8C/38W Group, tables
1.3 and
1.4 outline the Specifications
for R8C/38X Group, tables
1.5 and
1.6 outline the Specifications for R8C/38Y Group, and tables
1.7 and
1.8outline the Specifications for R8C/38Z Group.
Table 1.1
Specifications for R8C/38W Group (1)
Item
Function
Specification
CPU
Central processing
unit
R8C CPU core
Number of fundamental instructions: 89
Minimum instruction execution time:
50 ns (f(XIN) = 20 MHz, VCC = 2.7 to 5.5 V)
Multiplier: 16 bits × 16 bits
→ 32 bits
Multiply-accumulate instruction: 16 bits × 16 bits + 32 bits
→ 32 bits
Operating mode: Single-chip mode (address space: 1 Mbyte)
Memory
ROM, RAM, Data
flash
Refer to Table 1.9 Product List for R8C/38W Group.
Power Supply
Voltage
Detection
Voltage detection
circuit
Power-on reset
Voltage detection 3 (detection level of voltage detection 1 selectable)
I/O Ports
Programmable I/O
ports
Input-only: 1 pin
CMOS I/O ports: 75, selectable pull-up resistor
Clock
Clock generation
circuits
3 circuits: XIN clock oscillation circuit (with on-chip feedback resistor),
High-speed on-chip oscillator (with frequency adjustment function),
Low-speed on-chip oscillator
Oscillation stop detection: XIN clock oscillation stop detection function
Frequency divider circuit: Dividing selectable 1, 2, 4, 8, and 16
Low power consumption modes:
Standard operating mode (high-speed clock, high-speed on-chip oscillator,
low-speed on-chip oscillator), wait mode, stop mode
Interrupts
Interrupt vectors: 69
External: 9 sources (INT × 5, key input × 4)
Priority levels: 7 levels
Watchdog Timer
14 bits × 1 (with prescaler)
Reset start selectable
Low-speed on-chip oscillator for watchdog timer selectable
DTC (Data Transfer Controller)
1 channel
Activation sources: 40
Transfer modes: 2 (normal mode, repeat mode)