- 您现在的位置：买卖IC网 > PDF目录225025 > RC1585M15 (FAIRCHILD SEMICONDUCTOR CORP) 1.5 V FIXED POSITIVE LDO REGULATOR, 1.3 V DROPOUT, PSSO3 PDF资料下载
参数资料
| 型号： | RC1585M15 |
| 厂商： | FAIRCHILD SEMICONDUCTOR CORP |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 1.5 V FIXED POSITIVE LDO REGULATOR, 1.3 V DROPOUT, PSSO3 |
| 封装： | PLASTIC, TO-263, 3 PIN |
| 文件页数： | 13/15页 |
| 文件大小： | 181K |
| 代理商： | RC1585M15 |
PRODUCT SPECIFICATION
RC1585
REV. 1.1.2
7
Figure 11. Basic Regulator Circuit
Load Regulation
It is not possible to provide true remote load sensing because
the RC1585 series are three-terminal devices. Load regula-
tion is limited by the resistance of the wire connecting the
regulators to the load. Load regulation per the data sheet
specication is measured at the bottom of the package.
For xed voltage devices, negative side sensing is a true
Kelvin connection with the ground pin of the device returned
to the negative side of the load. This is illustrated in
Figure 12.
Figure 12. Connection for Best Load Regulation
For adjustable voltage devices, negative side sensing is a true
Kelvin connection with the bottom of the output divider
returned to the negative side of the load. The best load regu-
lation is obtained when the top of the resistor divider R1 con-
nects directly to the regulator output and not to the load.
Figure 13 illustrates this point.
If R1 connects to the load, then the effective resistance
between the regulator and the load would be:
RP x (1 + R2/R1), RP = Parasitic Line Resistance
The connection shown in Figure 13 does not multiply RP by
the divider ratio. As an example, RP is about four milliohms
per foot with 16-gauge wire. This translates to 4mV per foot
at 1A load current. At higher load currents, this drop repre-
sents a signicant percentage of the overall regulation. It is
important to keep the positive lead between the regulator and
the load as short as possible and to use large wire or PC
board traces.
Figure 13. Connection for Best Load Regulation
Thermal Considerations
The RC1585 series protect themselves under overload condi-
tions with internal power and thermal limiting circuitry.
However, for normal continuous load conditions, do not
exceed maximum junction temperature ratings. It is impor-
tant to consider all sources of thermal resistance from junc-
tion-to-ambient. These sources include the junction-to-case
resistance, the case-to-heat sink interface resistance, and the
heat sink resistance. Thermal resistance specications have
been developed to more accurately reect device tempera-
ture and ensure safe operating temperatures.
For example, look at using an RC1585T to generate 5A @
1.5V ± 2% from a 3.3V source (3.2V to 3.6V).
Assumptions:
VIN = 3.6V worst case
VOUT = 1.46V worst case
IOUT = 5A continuous
TA = 60°C
θCase-to-Ambient = 3°C/W (assuming both a heatsink and
a thermally conductive material)
The power dissipation in this application is:
PD = (VIN – VOUT) * (IOUT) = (3.6 – 1.46) * (5) = 10.7W
From the specication table:
TJ = TA + (PD) * (θCase-to-Ambient + θJC)
= 60 + (10.7) * (3 + 3) = 120
°C
The junction temperature is below the maximum rating.
RC1585
ADJ
IADJ
35
A
R2
R1
C2
22
F
VOUT
VREF
+
C1
10
F
+
65-1585-13
IN
VOUT = VREF (1 + R2/R1) + IADJ (R2)
OUT
VIN
RC1585-1.5
GND
RL
65-1585-14
RP
PARASITIC
LINE RESISTANCE
IN
OUT
VIN
RC1585
ADJ
R2*
CONNECT R1 TO CASE
CONNECT R2 TO LOAD
*
R1*
RL
65-1585-15
RP
PARASITIC
LINE RESISTANCE
IN
OUT
VIN
相关PDF资料 |
PDF描述 |
|---|---|
| RC1585T15 | 1.5 V FIXED POSITIVE LDO REGULATOR, 1.3 V DROPOUT, PSFM3 |
| RC1587T-1.5 | 1.5 V FIXED POSITIVE LDO REGULATOR, 1.3 V DROPOUT, PSFM3 |
| RC1587T | 1.5 V-3.6 V ADJUSTABLE POSITIVE LDO REGULATOR, 1.3 V DROPOUT, PSFM3 |
| RC1587M-1.5 | 1.5 V FIXED POSITIVE LDO REGULATOR, 1.3 V DROPOUT, PSSO3 |
| RC1587M | 1.5 V-3.6 V ADJUSTABLE POSITIVE LDO REGULATOR, 1.3 V DROPOUT, PSSO3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| RC1585M15_32 | 功能描述:低压差稳压器 - LDO 5a Fixed LDO Linear RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| RC1585M15T | 功能描述:低压差稳压器 - LDO 5a Lin Reg 1.5V LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| RC1585M15T_32 | 功能描述:低压差稳压器 - LDO 5a Lin Reg 1.5V LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| RC1585M15T_36 | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| RC1585MC | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Positive Adjustable Voltage Regulator |
发布紧急采购，3分钟左右您将得到回复。