- 您现在的位置：买卖IC网 > Datasheet目录503 > RN42N-I/RM (Microchip Technology)MODULE BLUETOOTH V2.0+EDR Datasheet资料下载
参数资料
| 型号： | RN42N-I/RM |
| 厂商： | Microchip Technology |
| 文件页数： | 7/12页 |
| 文件大小： | 0K |
| 描述： | MODULE BLUETOOTH V2.0+EDR |
| 应用说明： | Cable Replacement |
| 产品变化通告： | Mfg/Part Number Change 20/Jun/2012 |
| 标准包装： | 1 |
| 频率： | 2.402GHz ~ 2.48GHz |
| 数据传输率 - 最大： | 3Mbps |
| 调制或协议： | 蓝牙 v2.1+EDR，2 类 |
| 应用： | 通用 |
| 功率 - 输出： | 4dBm |
| 灵敏度： | -80dBm |
| 电源电压： | 3 V ~ 3.6 V |
| 电流 - 接收： | 45mA |
| 电流 - 传输： | 45mA |
| 数据接口： | PCB，表面贴装 |
| 天线连接器： | PCB，表面贴装 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 24-SMD 模块 |
| 包装： | 剪切带 (CT) |
| 其它名称： | 740-1043 740-1043-1 740-1043-ND |
RN -42 -DS
?
DESIGN CONCERNS ?
The following sections provide information on designing with the RN-42 module, including radio interference, factory reset,
solder reflow profile, connection status, etc.
Reset Circuit
The RN-42 contains a 1k pullup to VCC, and the reset polarity is active low. The module’s reset pin has an optional power-
on-reset circuit with a delay, which should only be required if the input power supply has a very slow ramp or tends to
bounce or have instability on power up. Often a microcontroller or embedded CPU I/O is available to generate the reset
once power is stable. If not, designers can use one of the many low-cost power supervisor chips currently available, such
as the MCP809, MCP102/121, and Torex XC61F.
Factory Reset Using GPIO4
Roving Networks recommends that designers connect the GPIO4 pin to a switch, jumper, or resistor so it can be accessed.
This pin can be used to reset the module to its factory default settings, which is critical in situations where the module has
been misconfigured. To reset the module to the factory defaults, GPIO4 should be high on power-up and then toggle low,
high, low, high with a 1 second wait between the transitions.
Connection Status
GPIO5 is available to drive an LED, and it blinks at various speeds to indicate status (see Table 7). GPIO2 is an output that
directly reflects the connection state as shown in Table 8.
Table 8. GPIO5 Status
GPIO5 Status
Toggle at 1 Hz
Toggle at 10 Hz
High
Table 9. GPIO2 Status
GPIO2 Status
High
Low
Description
The module is discoverable and waiting for a connection.
The module is in command mode.
The module is connected to another device over Bluetooth.
Description
The module is connected to another device over Bluetooth.
The module is not connected over Bluetooth.
HCI Mode
Roving Networks offers the Host Controller Interface (HCI) mode in addition to the standard operational mode of its
Bluetooth modules (standard mode refers to the on-board stack running on the module).
In HCI mode, the on-board stack is bypassed and the module is put in a state that runs the Bluetooth baseband. The HCI
provides a command reference interface to the baseband controller and the link manager, and provides access to the
hardware status and control registers. This interface provides a uniform method for accessing the Bluetooth baseband
capabilities.
www.rovingnetworks.com
Version 2.2r 4/9/2012
7
相关PDF资料 |
PDF描述 |
|---|---|
| RP1A090ZPTR | MOSFET P-CH 12V 9A MPT6 |
| RP1E050RPTR | MOSFET P-CH 30V 5A MPT6 |
| RP1E090RPTR | MOSFET P-CH 30V 9A MPT6 |
| RP1E100RPTR | MOSFET P-CH 30V 10A MPT6 |
| RPM-012PBT97 | PHOTOTRANSISTOR SIDE VIEW SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| RN42NU-I/RM | 功能描述:蓝牙/802.15.1 模块 Class2 Bluetooth mod no ant, HCI over USB RoHS:否 制造商:Murata Wireless Solutions 类:1 频带:2402 MHz to 2480 MHz 灵敏度:- 92 dBm 数据速率: 工作电源电压:2.2 V to 3.3 V 输出功率: 接口类型:PCM, UART 天线连接器类型:Chip 最大工作温度:+ 85 C 尺寸:17.5 mm x 16 mm x 2 mm |
| RN-42-SM | 功能描述:蓝牙/802.15.1 模块 Class 2 Bluetooth 2.1+EDR Socket Mod RoHS:否 制造商:Murata Wireless Solutions 类:1 频带:2402 MHz to 2480 MHz 灵敏度:- 92 dBm 数据速率: 工作电源电压:2.2 V to 3.3 V 输出功率: 接口类型:PCM, UART 天线连接器类型:Chip 最大工作温度:+ 85 C 尺寸:17.5 mm x 16 mm x 2 mm |
| RN42SM-I/RM | 功能描述:MODULE BLUETOOTH V2.1+EDR RoHS:是 类别:RF/IF 和 RFID >> RF 收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:30 系列:- 频率:4.9GHz ~ 5.9GHz 数据传输率 - 最大:54Mbps 调制或协议:* 应用:* 功率 - 输出:-3dBm 灵敏度:- 电源电压:2.7 V ~ 3.6 V 电流 - 接收:* 电流 - 传输:* 数据接口:PCB，表面贴装 存储容量:- 天线连接器:PCB，表面贴装 工作温度:-25°C ~ 85°C 封装/外壳:68-TQFN 裸露焊盘 包装:管件 |
| RN42U-I/RM | 功能描述:蓝牙/802.15.1 模块 USB firmware HCI over USB port RoHS:否 制造商:Murata Wireless Solutions 类:1 频带:2402 MHz to 2480 MHz 灵敏度:- 92 dBm 数据速率: 工作电源电压:2.2 V to 3.3 V 输出功率: 接口类型:PCM, UART 天线连接器类型:Chip 最大工作温度:+ 85 C 尺寸:17.5 mm x 16 mm x 2 mm |
| RN42XVP-I/RM | 功能描述:蓝牙/802.15.1 模块 XV BT Class 2 socket module w/ chip ant RoHS:否 制造商:Murata Wireless Solutions 类:1 频带:2402 MHz to 2480 MHz 灵敏度:- 92 dBm 数据速率: 工作电源电压:2.2 V to 3.3 V 输出功率: 接口类型:PCM, UART 天线连接器类型:Chip 最大工作温度:+ 85 C 尺寸:17.5 mm x 16 mm x 2 mm |
发布紧急采购，3分钟左右您将得到回复。