参数资料
型号: RPER72A683K3K1C07B
厂商: Murata Electronics North America
文件页数: 28/57页
文件大小: 0K
描述: CAP CER 0.068UF 100V 10% RADIAL
标准包装: 500
系列: RPE
电容: 0.068µF
电压 - 额定: 100V
容差: ±10%
温度系数: X7R
安装类型: 通孔
工作温度: -55°C ~ 125°C
应用: 通用
封装/外壳: 径向
尺寸/尺寸: 0.197" L x 0.124" W(5.00mm x 3.15mm)
高度 - 座高(最大): 0.248"(6.30mm)
引线间隔: 0.197"(5.00mm)
包装: 散装
引线型: 扁平弯曲
! Note ? Please read rating and ! CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
? This catalog has only typical speci?cations. Therefore, please approve our product speci?cations or transact the approval sheet for product speci?cations before ordering.
Speci?cations and Test Methods
Specification
C49E.pdf
Mar.12,2014
No. AEC-Q200 Test Item Temperature Compensating Type High Dielectric Constant Type
AEC-Q200 Test Method
(Char. X8G)
(Char. X8L)
2
1
Pre-and Post-Stress
Electrical Test
High Temperature
The measured and observed characteristics should satisfy the
Exposure (Storage) specifications in the following table.
Appearance No defects or abnormalities
2
Capacitance Within ±3% or ±0.3pF
Change (Whichever is larger)
Q U 350
Q/D.F.
Within ±12.5%
0.04 max.
Sit the capacitor for 1,000±12h at 150±3°C. Let sit for 24±2h at
room temperature, then measure.
I.R.
More than 1,000M Ω or 50M Ω · μF (Whichever is smaller)
Temperature
Cycling
The measured and observed characteristics should satisfy the
specifications in the following table.
Perform the 1,000 cycles according to the four heat treatments
listed in the following table. Let sit for 24±2h at *room condition,
Appearance
No defects or abnormalities except color change of outer
coating
then measure.
Step 1
2
3
4
3
Capacitance Within ±5% or ±0.5pF
Change (Whichever is larger)
Within ±12.5%
Temp. (°C) -55+0/-3 Room Temp. 150+3/-0 Room Temp.
Time (min.) 15±3 1 15±3 1
Q/D.F.
Q U 350
0.05 max.
Perform the heat treatment at 150+0/-10°C for 60±5 min and
I.R.
Moisture
Resistance
1,000M Ω or 50M Ω · μF min. (Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
then let sit for 24±2h at *room condition. (for Char. X8L)
Apply the 24h heat (25 to 65°C) and humidity (80 to 98%)
treatment shown below, 10 consecutive times.
Appearance No defects or abnormalities
Let sit for 24±2h at *room condition, then measure.
Humidity
Humidity Humidity Humidity
Humidity
Capacitance Within ±5% or ±0.5pF
Change (Whichever is larger)
Within ±12.5%
(°C)
70
65
90-98%
80-98% 90-98%
80-98%
90-98%
60
Q/D.F.
Q U 200
0.05 max.
55
50
45
4
40
35
30
-2 °C
25
20
15
10
+10
Initial measurement
I.R.
Biased Humidity
500M Ω or 25M Ω · μF min. (Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
5
0
-5
-10
One cycle = 24 hours
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Hours
Apply the rated voltage and DC1.3+0.2/-0V (add 6.8k Ω resistor)
at 85±3°C and 80 to 85% humidity for 1,000±12h.
Appearance No defects or abnormalities
Remove and let sit for 24±2h at *room condition, then measure.
5
Capacitance Within ±5% or ±0.5pF
Change (Whichever is larger)
Within ±12.5%
The charge/discharge current is less than 50mA.
Q/D.F.
Q U 200
0.05 max.
Perform the heat treatment at 150+0/-10°C for 60±5 min and
I.R.
Operational Life
Appearance
500M Ω or 25M Ω · μF min. (Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
No defects or abnormalities except color change of outer
coating
then let sit for 24±2h at *room condition. (for Char. X8L)
Apply 150% of the rated voltage for 1,000±12h at 150±3°C.
Let sit for 24±2h at *room condition, then measure.
The charge/discharge current is less than 50mA.
6
Capacitance Within ±3% or ±0.3pF
Change (Whichever is larger)
Within ±12.5%
Apply test voltage for 60±5 min at test temperature.
Q/D.F.
Q U 350
0.04 max.
Remove and let sit for 24±2h at *room condition.
(for Char. X8L)
I.R.
1,000M Ω or 50M Ω · μF min. (Whichever is smaller)
7
External Visual
No defects or abnormalities
Visual inspection
8
Physical Dimension Within the specified dimensions
Using calipers and micrometers.
9
Marking
To be easily legible.
Visual inspection
* “room condition” Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
26
相关PDF资料
PDF描述
GRM32ER61C476ME15K CAP CER 47UF 16V 20% X5R 1210
GRM32ER61C476KE15K CAP CER 47UF 16V 10% X5R 1210
GRM31C5C1H104GA01K CAP CER 0.1UF 50V 2% NP0 1206
GRM31CR71C106KAC7K CAP CER 10UF 16V 10% X7R 1206
GRM31M6R2A102JZ01L CAP CER 1000PF 100V 5% R2H 1206
相关代理商/技术参数
参数描述
RPER72A683K3K1D02B 功能描述:多层陶瓷电容器MLCC - 含引线 68000pF 100volt X7R +/-10% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPER72A683K3M1C07A 功能描述:多层陶瓷电容器MLCC - 含引线 0.068uF 100volts X7R 10% 5.0mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPER72A683K3M1D02A 功能描述:多层陶瓷电容器MLCC - 含引线 68000pF 100volt X7R +/-10% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPER72A683K3M2C07A 功能描述:多层陶瓷电容器MLCC - 含引线 0.068uF 100volts X7R 10% 5.0mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPER72A683K3M2D02A 功能描述:多层陶瓷电容器MLCC - 含引线 68000pF 100volt X7R +/-10% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型: