- 您现在的位置：买卖IC网 > PDF目录11261 > RPER72A683K3K1C07B (Murata Electronics North America)CAP CER 0.068UF 100V 10% RADIAL PDF资料下载
参数资料
| 型号： | RPER72A683K3K1C07B |
| 厂商： | Murata Electronics North America |
| 文件页数： | 29/57页 |
| 文件大小： | 0K |
| 描述： | CAP CER 0.068UF 100V 10% RADIAL |
| 标准包装： | 500 |
| 系列： | RPE |
| 电容： | 0.068µF |
| 电压 - 额定： | 100V |
| 容差： | ±10% |
| 温度系数： | X7R |
| 安装类型： | 通孔 |
| 工作温度： | -55°C ~ 125°C |
| 应用： | 通用 |
| 封装/外壳： | 径向 |
| 尺寸/尺寸： | 0.197" L x 0.124" W（5.00mm x 3.15mm） |
| 高度 - 座高（最大）： | 0.248"（6.30mm） |
| 引线间隔： | 0.197"（5.00mm） |
| 包装： | 散装 |
| 引线型： | 扁平弯曲 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页当前第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页
! Note ? Please read rating and ! CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
? This catalog has only typical speci?cations. Therefore, please approve our product speci?cations or transact the approval sheet for product speci?cations before ordering.
C49E.pdf
Mar.12,2014
Speci?cations and Test Methods
Continued from the preceding page.
Specification
No. AEC-Q200 Test Item Temperature Compensating Type High Dielectric Constant Type
AEC-Q200 Test Method
(Char. X8G)
Appearance No defects or abnormalities
(Char. X8L)
Per MIL-STD-202 Method 215
Capacitance Within the specified tolerance
Solvent 1: 1 part (by volume) of isopropyl alcohol
3 parts (by volume) of mineral spirits
2
10
Resistance Q/D.F.
to Solvents
Q U 1,000
0.025 max.
Solvent 2: Terpene defluxer
Solvent 3: 42 parts (by volume) of water
I.R.
More than 10,000M Ω or 500M Ω · μF (Whichever is smaller)
1 part (by volume) of propylene glycol
monomethyl ether
1 part (by volume) of monoethanolamine
Appearance No defects or abnormalities
Three shocks in each direction should be applied along 3
11
Mechanical Capacitance Within the specified tolerance
Shock
Q/D.F. Q U 1,000
0.025 max.
mutually perpendicular axes of the test specimen (18 shocks).
The specified test pulse should be Half-sine and should
have a duration: 0.5ms, peak value: 1,500G and velocity
change: 4.7m/s.
12 Vibration
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 2,000Hz.
The frequency range, from 10 to 2,000Hz and return to 10Hz,
Q/D.F.
Q U 1,000
0.025 max.
should be traversed in approximately 20min. This motion
should be applied for 12 items in each 3 mutually perpendicular
directions (total of 36 times).
Resistance to
Soldering Heat
The measured and observed characteristics should satisfy the
specifications in the following table.
The lead wire is immersed in the melted solder 1.5 to 2mm
Appearance No defects or abnormalities
from the main body at 260±5°C for 10±1s. The specified items
13
Capacitance Within ±2.5% or ±0.25pF
Change (Whichever is larger)
Dielectric
Strength
No defects
(Between
Within ±7.5%
are measured after 24±2h.
Perform the heat treatment at 150+0/-10°C for 60±5 min and
then let sit for 24±2h at *room condition. (for Char. X8L)
Terminals)
Thermal Shock
The measured and observed characteristics should satisfy the
specifications in the following table.
Perform the 300 cycles according to the two heat treatments
listed in the following table (Maximum transfer time is 20s.).
Appearance No defects or abnormalities
Let sit for 24±2h at *room condition, then measure.
14
Capacitance Within ±5% or ±0.5pF
Change (Whichever is larger)
Q/D.F. Q U 350
Within ±12.5%
0.05 max.
Step
Temp. (°C)
Time (min.)
1
-55+0/-3
15±3
2
150+3/-0
15±3
I.R.
1,000M Ω or 50M Ω · μF min. (Whichever is smaller)
Perform the heat treatment at 150+0/-10°C for 60±5min and
then let sit for 24±2h at *room condition. (for Char. X8L)
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
15 ESD
Q/D.F.
Q U 1,000
0.025 max.
Per AEC-Q200-004
I.R.
More than 10,000M Ω or 500M Ω · μF (Whichever is smaller)
The terminal of a capacitor is dipped into a solution of ethanol
(JIS-K-8101) and rosin (JIS-K-5902) (25%rosin in weight
propotion) and then into molten solder (JIS-Z-3282) for
16 Solderability
Lead wire should be soldered with uniform coating on the axial
direction over 95% of the circumferential direction.
2±0.5 sec. In both cases the depth of dipping is up to about
1.5 to 2mm from the terminal body.
Temp. of solder:
245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
* “room condition” Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
27
相关PDF资料 |
PDF描述 |
|---|---|
| GRM32ER61C476ME15K | CAP CER 47UF 16V 20% X5R 1210 |
| GRM32ER61C476KE15K | CAP CER 47UF 16V 10% X5R 1210 |
| GRM31C5C1H104GA01K | CAP CER 0.1UF 50V 2% NP0 1206 |
| GRM31CR71C106KAC7K | CAP CER 10UF 16V 10% X7R 1206 |
| GRM31M6R2A102JZ01L | CAP CER 1000PF 100V 5% R2H 1206 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| RPER72A683K3K1D02B | 功能描述:多层陶瓷电容器MLCC - 含引线 68000pF 100volt X7R +/-10% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型: |
| RPER72A683K3M1C07A | 功能描述:多层陶瓷电容器MLCC - 含引线 0.068uF 100volts X7R 10% 5.0mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型: |
| RPER72A683K3M1D02A | 功能描述:多层陶瓷电容器MLCC - 含引线 68000pF 100volt X7R +/-10% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型: |
| RPER72A683K3M2C07A | 功能描述:多层陶瓷电容器MLCC - 含引线 0.068uF 100volts X7R 10% 5.0mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型: |
| RPER72A683K3M2D02A | 功能描述:多层陶瓷电容器MLCC - 含引线 68000pF 100volt X7R +/-10% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型: |
发布紧急采购，3分钟左右您将得到回复。