- 您现在的位置：买卖IC网 > Datasheet目录505 > RXM-GPS-SG-T (Linx Technologies Inc)GPS MODULE SMD SIRF Datasheet资料下载
参数资料
| 型号： | RXM-GPS-SG-T |
| 厂商： | Linx Technologies Inc |
| 文件页数： | 12/17页 |
| 文件大小： | 0K |
| 描述： | GPS MODULE SMD SIRF |
| 产品变化通告： | RXM-GPS-SG Receiver Change 19/Apri/2010 RXM-GPS-SG Receiver Update 14/Jun/2010 |
| 标准包装： | 1,000 |
| 系列： | SG |
| 封装/外壳： | 模块 |
| 供应商设备封装： | 模块 |
| 包装： | 散装 |
The receiver outputs a response to this command. The table below contains the
response for the above command:
$PLSR,200,1,2, 3 00,1000, 3 00000, 3 0000*02
211 – SetIO
The table below contains the values for the following example to set GPIO 1 as
an input:
Name
Example
Units
Description
$PLSC,211,1,0,0*0F
MID
Valid
Mode
OnTime
$PLSR,200
1
2
3 00
Message ID
0: command invalid, 1: command valid
See Table 22
Display when mode = 2
Name
MID
GPIO
Number
Example
$PLSC,211
1
Units
Description
Message ID
Number of the GPIO line to set. Only one
line can be set at a time.
LP Interval
1000
Display when mode = 2
MaxAcqTime
MaxOffTime
Checksum
3 00000
3 0000
*02
Display when mode = 2
Display when mode = 2
Direction
State
0
0
Direction; 0 = Input; 1 = Output
Set to 1 if the direction is an output; the
value does not matter if the direction is an
<CR> <LF>
End of message termination
input.
Table 2 3 : Power Management Response Example
For some further examples of this command:
Checksum
<CR> <LF>
*0F
End of message termination
n Query the power management mode
Input command: $PLSC,200,0*0E
Output response: $PLSR,200,1,1*0 3
Table 26: SetIO Example
The receiver outputs a response to this command. The table below contains the
response for the above command:
202 – StaticNavigation
This command is used to query, enable, and disable static navigation. The table
below contains the values for the following example to disable static navigation:
MID
Name
Example
$PLSR,211
Units
Message ID
Description
$PLSC,202,2*0E
Valid
1
0: command invalid, 1: command valid
MID
Name
Example
$PLSR,202
Units
Message ID
Description
Checksum
<CR> <LF>
*1E
End of message termination
Command
1
0: Query, 1: Enable (default), 2: Disable
Table 27: SetIO Response Example
Checksum
<CR> <LF>
*02
End of message termination
For some further examples of this command:
n Set GPIO 1 as an Input
Table 24: StaticNavigation Example
The table below contains the response for the above command:
Name Example Units Description
Input command: $PLSC,211,1,0,0*0F
Output response: $PLSR,211,1*1E
n Set GPIO 1 as an output, initial state low
Input command: $PLSC,211,1,1,0*0E
MID
Valid
Result
Checksum
<CR> <LF>
$PLSR,202
1
2
*1E
Message ID
0: command invalid, 1: command valid
0: command failed, 1: static navigation
enabled, 2: static navigation disabled
End of message termination
Output response: $PLSR,211,1*1E
NOTE
1. If the message ID is not recognized, the response will be “$PLSR,999,0,ERROR*60”
2. If the value is not allowed, the response will be “$PLSR,MID,0,ERROR*CS”
3 . All GPIOs default to inputs on power-up and reset.
Table 25: StaticNavigation Response Example
Page 22
Page 2 3
相关PDF资料 |
PDF描述 |
|---|---|
| RXM-GPS-SR-T | GPS MODULE SMD SIRF W/ANT |
| RZE002P02TL | MOSFET P-CH 20V 200MA EMT3 |
| RZF020P01TL | MOSFET P-CH 12V 2A TUMT3 |
| RZF030P01TL | MOSFET P-CH 12V 3A TUMT3 |
| RZM002P02T2L | MOSFET P-CH 20V 0.2A UMT6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| RXM-GPS-SR-B | 功能描述:GPS模块 GPS Receiver with Integrated Antenna RoHS:否 制造商:Linx Technologies 频带:1.575 GHz 通道数量:20 首次定位时间（冷启动）:35 s 获取敏感性:- 144 dBm 水平位置精确度:10 m 工作电源电压:3 V to 4.2 V 工作电源电流:46 mA 接口类型:Serial 最大工作温度:+ 85 C 安装风格:SMD/SMT 尺寸:15 mm x 13 mm x 2.2 mm |
| RXM-GPS-SR-T | 功能描述:GPS模块 GPS Receiver with Integrated Antenna RoHS:否 制造商:Linx Technologies 频带:1.575 GHz 通道数量:20 首次定位时间（冷启动）:35 s 获取敏感性:- 144 dBm 水平位置精确度:10 m 工作电源电压:3 V to 4.2 V 工作电源电流:46 mA 接口类型:Serial 最大工作温度:+ 85 C 安装风格:SMD/SMT 尺寸:15 mm x 13 mm x 2.2 mm |
| RXM-UHF | 制造商:RADIOMETRIX 制造商全称:RADIOMETRIX 功能描述:UHF Radio Telemetry Receiver Module |
| RXP0005 | 制造商:Panasonic Industrial Company 功能描述:ARM |
| RXP0014 | 制造商:Panasonic Industrial Company 功能描述:PULLEY |
发布紧急采购，3分钟左右您将得到回复。