- 您现在的位置：买卖IC网 > PDF目录219501 > S-1167B24-I6T2U 2.4 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO6 PDF资料下载
参数资料
| 型号： | S-1167B24-I6T2U |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 2.4 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO6 |
| 封装： | HALOGEN FREE AND LEAD FREE, SNT-6 |
| 文件页数： | 2/31页 |
| 文件大小： | 480K |
| 代理商： | S-1167B24-I6T2U |
第1页当前第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页
ULTRA LOW CURRENT CONSUMPTION, HIGH RIPPLE REJECTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1167 Series
Rev.3.0_00
Seiko Instruments Inc.
10
Standard Circuit
CIN
*1
CL
*2
Input
Output
GND
Single GND
VOUT
VIN
VSS
ON / OFF
*1. A capacitor for stabilizing the input.
*2. A ceramic capacitor of 1.0
μF or more can be used.
Figure 10
Caution
The above connection diagram and constant will not guarantee successful operation.
Perform
thorough evaluation using the actual application to set the constant.
Application Conditions
Input capacitor (CIN) : 1.0 μF or more
Output capacitor (CL) : 1.0 μF or more
Equivalent series resistance (RESR) of output capacitor : 1.0 Ω or less
Caution A general series regulator may oscillate, depending on the external components selected. Check that
no oscillation occurs with the application using the above capacitor.
Selection of Input Capacitor (CIN) and Output Capacitor (CL)
The S-1167 Series requires an output capacitor between the VOUT pin and VSS pin for phase
compensation. Operation is stabilized by a ceramic capacitor with an output capacitance of 1.0
μF or more
in the entire temperature range. However, when using an OS capacitor, tantalum capacitor, or aluminum
electrolytic capacitor, a ceramic capacitor with a capacitance of 1.0
μF or more and an equivalent series
resistance (RESR) of 1.0 Ω or less is required.
The value of the output overshoot or undershoot transient response varies depending on the value of the
output capacitor. The required capacitance of the input capacitor differs depending on the application.
The recommended value for an application is 1.0
μF or more for CIN and 1.0 μF or more for CL; however,
when selecting the output capacitor, perform sufficient evaluation, including evaluation of temperature
characteristics, on the actual device.
相关PDF资料 |
PDF描述 |
|---|---|
| S-1167B31-I6T2U | 3.1 V FIXED POSITIVE LDO REGULATOR, 0.23 V DROPOUT, PDSO6 |
| S-1167B31-M5T1U | 3.1 V FIXED POSITIVE LDO REGULATOR, 0.23 V DROPOUT, PDSO5 |
| S-1170B16PD-OTBTFS | 1.6 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO6 |
| S-1170B16UC-OTBTFU | 1.6 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO5 |
| S-1172B16-E6T1U | 1.6 V FIXED POSITIVE LDO REGULATOR, 0.15 V DROPOUT, PDSO6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-1167B24-M5T1G | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 9A Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1167B24-M5T1U | 功能描述:IC REG LINEAR 150MA SOT23-5 制造商:ablic u.s.a. inc. 系列:* 包装:剪切带（CT） 零件状态:在售 稳压器数:1 电流 - 输出:150mA 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商器件封装:SOT-23-5 标准包装:1 |
| S-1167B25-I6T2G | 功能描述:低压差稳压器 - LDO Linear LDO reg Hi 9A Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1167B25-I6T2U | 功能描述:IC REG LINEAR 150MA SNT6A 制造商:ablic u.s.a. inc. 系列:- 包装:剪切带（CT） 零件状态:在售 输出配置:正 输出类型:固定 稳压器数:1 电压 - 输入（最大值）:6.5V 电压 - 输出（最小值/固定）:2.5V 电压 - 输出（最大值）:- 压降（最大值）:0.3V @ 100mA 电流 - 输出:150mA 电流 - 静态（Iq):16μA PSRR:70dB（1kHz） 控制特性:使能 保护功能:过流 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:6-SMD，扁平引线 供应商器件封装:SNT-6A（H） 标准包装:1 |
| S-1167B25-M5T1G | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 9A Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。