- 您现在的位置：买卖IC网 > PDF目录219501 > S-1167B24-I6T2U 2.4 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO6 PDF资料下载
参数资料
| 型号： | S-1167B24-I6T2U |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 2.4 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO6 |
| 封装： | HALOGEN FREE AND LEAD FREE, SNT-6 |
| 文件页数： | 7/31页 |
| 文件大小： | 480K |
| 代理商： | S-1167B24-I6T2U |
第1页第2页第3页第4页第5页第6页当前第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页
ULTRA LOW CURRENT CONSUMPTION, HIGH RIPPLE REJECTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.0_00
S-1167 Series
Seiko Instruments Inc.
15
Precautions
Wiring patterns for the VIN pin, VOUT pin and GND pin should be designed so that the impedance is low. When
mounting an output capacitor between the VOUT pin and VSS pin (CL) and a capacitor for stabilizing the input between
VIN pin and VSS pin (CIN), the distance from the capacitors to these pins should be as short as possible.
Note that the output voltage may increase when a series regulator is used at low load current (10
μA or less).
Note that the output voltage may increase due to driver leakage when a series regulator is used at high temperatures.
Generally a series regulator may cause oscillation, depending on the selection of external parts. The following
conditions are recommended for this IC. However, be sure to perform sufficient evaluation under the actual usage
conditions for selection, including evaluation of temperature characteristics.
Input capacitor (CIN) : 1.0 μF or more
Output capacitor (CL) : 1.0 μF or more
Equivalent series resistance (RESR) : 1.0 Ω or less
The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitor is small or
an input capacitor is not connected.
It is important to sufficiently evaluate the output voltage fluctuation due to the power supply fluctuation and load
fluctuation characteristics in the actual equipment.
If the power supply suddenly increases sharply, a momentary overshoot may be output. It is therefore important to
sufficiently evaluate the output voltage at power application in the actual equipment.
The application conditions for the input voltage, output voltage, and load current should not exceed the package power
dissipation.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
In determining the output current, attention should be paid to the output current value specified in Table 6 in the “
Electrical Characteristics” and footnote *5 of the table.
SII claims no responsibility for any disputes arising out of or in connection with any infringement by products including
this IC of patents owned by a third party.
相关PDF资料 |
PDF描述 |
|---|---|
| S-1167B31-I6T2U | 3.1 V FIXED POSITIVE LDO REGULATOR, 0.23 V DROPOUT, PDSO6 |
| S-1167B31-M5T1U | 3.1 V FIXED POSITIVE LDO REGULATOR, 0.23 V DROPOUT, PDSO5 |
| S-1170B16PD-OTBTFS | 1.6 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO6 |
| S-1170B16UC-OTBTFU | 1.6 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO5 |
| S-1172B16-E6T1U | 1.6 V FIXED POSITIVE LDO REGULATOR, 0.15 V DROPOUT, PDSO6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-1167B24-M5T1G | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 9A Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1167B24-M5T1U | 功能描述:IC REG LINEAR 150MA SOT23-5 制造商:ablic u.s.a. inc. 系列:* 包装:剪切带（CT） 零件状态:在售 稳压器数:1 电流 - 输出:150mA 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商器件封装:SOT-23-5 标准包装:1 |
| S-1167B25-I6T2G | 功能描述:低压差稳压器 - LDO Linear LDO reg Hi 9A Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1167B25-I6T2U | 功能描述:IC REG LINEAR 150MA SNT6A 制造商:ablic u.s.a. inc. 系列:- 包装:剪切带（CT） 零件状态:在售 输出配置:正 输出类型:固定 稳压器数:1 电压 - 输入（最大值）:6.5V 电压 - 输出（最小值/固定）:2.5V 电压 - 输出（最大值）:- 压降（最大值）:0.3V @ 100mA 电流 - 输出:150mA 电流 - 静态（Iq):16μA PSRR:70dB（1kHz） 控制特性:使能 保护功能:过流 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:6-SMD，扁平引线 供应商器件封装:SNT-6A（H） 标准包装:1 |
| S-1167B25-M5T1G | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 9A Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。