- 您现在的位置：买卖IC网 > PDF目录219504 > S-1170B53UC-OUMTFU 5.3 V FIXED POSITIVE LDO REGULATOR, 0.18 V DROPOUT, PDSO5 PDF资料下载
参数资料
| 型号： | S-1170B53UC-OUMTFU |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 5.3 V FIXED POSITIVE LDO REGULATOR, 0.18 V DROPOUT, PDSO5 |
| 封装： | HALOGEN FREE AND LEAD FREE, SOT-89, 5 PIN |
| 文件页数： | 9/30页 |
| 文件大小： | 311K |
| 代理商： | S-1170B53UC-OUMTFU |
第1页第2页第3页第4页第5页第6页第7页第8页当前第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.0_00
S-1170 Series
Seiko Instruments Inc.
17
Precautions
Wiring patterns for the VIN, VOUT and GND pins should be designed so that the impedance is low.
When mounting an output capacitor between the VOUT and VSS pins (CL) and a capacitor for stabilizing
the input between VIN and VSS pins (CIN), the distance from the capacitors to these pins should be as
short as possible.
Note that the output voltage may increase when a series regulator is used at low load current (1.0 mA or
less).
Generally a series regulator may cause oscillation, depending on the selection of external parts. The
following conditions are recommended for this IC. However, be sure to perform sufficient evaluation
under the actual usage conditions for selection, including evaluation of temperature characteristics.
Input capacitor (CIN):
4.7
μF or more
Output capacitor (CL):
4.7
μF or more
Equivalent series resistance (ESR): 0.5
Ω or less
The voltage regulator may oscillate when the impedance of the power supply is high and the input
capacitor is small or an input capacitor is not connected.
The application conditions for the input voltage, output voltage, and load current should not exceed the
package power dissipation.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in
electrostatic protection circuit.
In determining the output current, attention should be paid to the output current value specified in Table
5 in the “
Electrical Characteristics” and footnote *5 of the table.
SII claims no responsibility for any disputes arising out of or in connection with any infringement by
products including this IC of patents owned by a third party.
相关PDF资料 |
PDF描述 |
|---|---|
| S-1172B50-E6T1U | 5 V FIXED POSITIVE LDO REGULATOR, 0.1 V DROPOUT, PDSO6 |
| S-1172B50-U5T1U | 5 V FIXED POSITIVE LDO REGULATOR, 0.1 V DROPOUT, PDSO5 |
| S-1323B19NB-N8ETFU | 1.9 V FIXED POSITIVE LDO REGULATOR, 0.65 V DROPOUT, PDSO4 |
| S-1323B35NB-N8UTFU | 3.5 V FIXED POSITIVE LDO REGULATOR, 0.65 V DROPOUT, PDSO4 |
| S-1323B35PF-N8UTFU | 3.5 V FIXED POSITIVE LDO REGULATOR, 0.65 V DROPOUT, PDSO4 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-1170B54PD-OUNTFG | 制造商:Seiko Instruments Inc (SII) 功能描述:REG LDO LIN FIX POS 5.4V 0.8A 6PIN HSON(A) - Tape and Reel 制造商:Seiko Instruments Inc (SII) 功能描述:IC REG LDO 5.4V 0.8A 6HSON |
| S-1170B54UC-OUNTFG | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 80uA Iq 800mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1170B55PD-OUOTFG | 制造商:Seiko Instruments Inc (SII) 功能描述:REG LDO LIN FIX POS 5.5V 0.8A 6PIN HSON(A) - Tape and Reel 制造商:Seiko Instruments Inc (SII) 功能描述:IC REG LDO 5.5V 0.8A 6HSON |
| S-1170B55UC-OUOTFG | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 80uA Iq 800mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S117166920 | 制造商:Carlo Gavazzi 功能描述: |
发布紧急采购，3分钟左右您将得到回复。