- 您现在的位置：买卖IC网 > PDF目录368612 > S5L986F02 (SAMSUNG SEMICONDUCTOR CO. LTD.) DIGITAL SIGNAL PROCESSOR FOR DISCMAN PDF资料下载
参数资料
| 型号： | S5L986F02 |
| 厂商： | SAMSUNG SEMICONDUCTOR CO. LTD. |
| 元件分类： | 数字信号处理 |
| 英文描述： | DIGITAL SIGNAL PROCESSOR FOR DISCMAN |
| 中文描述： | 数字信号处理器随身听 |
| 文件页数： | 22/35页 |
| 文件大小： | 474K |
| 代理商： | S5L986F02 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页当前第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页
S5L9286F02
DIGITAL SIGNAL PROCESSOR FOR DISCMAN
22
CLV SERVO
CNTL-C, E, G1, G2, and G3 registers are selected to control the CLV (Constant Linear Velocity) servo using the
data input from MICOM. Also, the design is such that the servo control is stable when setting the speed. When
setting the speed, the /(Pw
≥
64) signal can be detected from the /ISTAT pin only if the CNTL-D register is first set
before the CNTL-C register is selected.
Forward
This mode rotates the spindle motor in the forward direction. The related output pin status are as follows: .
Reverse
This mode rotates the spindle motor in the reverse direction. The related output pin status are as follows:.
Speed-mode
The spindle motor is controlled roughly by speed mode when track jumping or EFM phase is unlocked.
If a period of VCO is "T", the pulse width of frame sync is 22T. In case that the signal detected from EFM signal
exceeds 22T by noise on the disc and etc., it must be removed, if not, the right frame sync can't be detected. In this
case, the pulse width of EFM signal is detected by peak hold clock and bottom hold clock. ( Peak hold clock is
XTFR/2 or XTFR/4, and bottom hold clock is XTFR/16 or XTFR/32.)
The detected value is used for synchronized frame signal. If the frame signal is less than 21T, the SMDP terminal
outputs "L", eaqul to 22T, outputs "Hi-Z", and more than 23T, ouputs "H".
If the gain signal of CNTL-W register is "L", the output of SMDP terminal is reduced up to
12dB, if it is "H", there is
no reduction.
Output condition: SMSD="Hi-Z", SMEF="L", SMON="H".
Hspeed-Mode
The rough servo mode, which moves 20,000 tracks in high speed acts between the inside and outside of the CD.
The mirror domain of track which hasn't pit is duplicated with 20KHz signal to EFM. In this case, servo action is
unstable because the peak value of mirror signal which is longer than orignal frame sync signal which is detected.
In Hspeed mode, by using the 8.4672/256MHz signal against peak hold and XTFR/16 or XTFR/32 signal against
bottom hold, the mirror component is removed, and Hspeed servo action to be stable.
he output condition is as following.
SMDP
SMSD
SMEF
SMON
H
Hi-Z
L
H
SMDP
SMSD
SMEF
SMON
L
Hi-Z
L
H
SMDP
SMSD
SMEF
SMON
–
Hi-Z
L
H
相关PDF资料 |
PDF描述 |
|---|---|
| S5N8943B | G.Lite ADSL Analog Front End IC |
| S5N8944B | G.Lite ADSL Transceiver for CO and CPE |
| S5N8947 | MCU for ADSL/Cable Modem |
| S5N8947X | MCU for ADSL/Cable Modem |
| S5N8950 | G.dmt ADSL Transceiver for CO and CPE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-5LB | 制造商:SUMIDA 制造商全称:Sumida Corporation 功能描述:RF COILS |
| S-5LD3 | 制造商:SUMIDA 制造商全称:Sumida Corporation 功能描述:RF COILS |
| S-5LDN | 制造商:SUMIDA 制造商全称:Sumida Corporation 功能描述:RF COILS |
| S-5LE | 制造商:SUMIDA 制造商全称:Sumida Corporation 功能描述:RF COILS |
| S-5LEN | 制造商:SUMIDA 制造商全称:Sumida Corporation 功能描述:RF COILS |
发布紧急采购，3分钟左右您将得到回复。