参数资料
型号: S83C51FA-24
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP44
封装: QFP-44
文件页数: 15/20页
文件大小: 1578K
代理商: S83C51FA-24
8XC51FX
PIN DESCRIPTIONS
VCC: Supply voltage.
VSS: Circuit ground.
VSS1: Secondary ground (not on DIP devices or any
83C51FA/80C51FA device). Provided to reduce
ground bounce and improve power supply by-pass-
ing.
NOTE
:
This pin is not a substitution for the VSS pin. (Con-
nection not necessary for proper operation.)
Port 0
: Port 0 is an 8-bit, open drain, bidirectional
I/O port. As an output port each pin can sink several
LS TTL inputs. Port 0 pins that have 1's written to
them float, and in that state can be used as high-im-
pedance inputs.
Port 0 is also the multiplexed low-order address and
data bus during accesses to external Program and
Data Memory. In this application it uses strong inter-
nal pullups when emitting 1's, and can source and
sink several LS TTL inputs.
Port 0 also receives the code bytes during EPROM
programming, and outputs the code bytes during
program verification. External pullup resistors are re-
quired during program verification.
Port 1
: Port 1 is an 8-bit bidirectional I/O port with
internal pullups. The Port 1 output buffers can drive
LS TTL inputs. Port 1 pins that have 1's written to
them are pulled high by the internal pullups, and in
that state can be used as inputs. As inputs, Port 1
pins that are externally pulled low will source current
(IIL, on the data sheet) because of the internal pull-
ups.
In addition, Port 1 serves the functions of the follow-
ing special features of the 8XC51FX:
Port Pin
Alternate Function
P1.0
T2 (External Count Input to Timer/
Counter 2), Clock Out
P1.1
T2EX (Timer/Counter 2 Capture/
Reload Trigger and Direction Control)
P1.2
ECI (External Count Input to the PCA)
P1.3
CEX0 (External I/O for Compare/
Capture Module 0)
P1.4
CEX1 (External I/O for Compare/
Capture Module 1)
P1.5
CEX2 (External I/O for Compare/
Capture Module 2)
P1.6
CEX3 (External I/O for Compare/
Capture Module 3)
P1.7
CEX4 (External I/O for Compare/
Capture Module 4)
Port 1 receives the low-order address bytes during
EPROM programming and verifying.
Port 2
: Port 2 is an 8-bit bidirectional I/O port with
internal pullups. The Port 2 output buffers can drive
LS TTL inputs. Port 2 pins that have 1's written to
them are pulled high by the internal pullups, and in
that state can be used as inputs. As inputs, Port 2
pins that are externally pulled low will source current
(IIL, on the data sheet) because of the internal pull-
ups.
Port 2 emits the high-order address byte during
fetches from external Program Memory and during
accesses to external Data Memory that use 16-bit
addresses (MOVX
DPTR). In this application it
uses strong internal pullups when emitting 1's. Dur-
ing accesses to external Data Memory that use 8-bit
addresses (MOVX Ri), Port 2 emits the contents of
the P2 Special Function Register.
Some Port 2 pins receive the high-order address bits
during EPROM programming and program verifica-
tion.
Port 3
: Port 3 is an 8-bit bidirectional I/O port with
internal pullups. The Port 3 output buffers can drive
LS TTL inputs. Port 3 pins that have 1's written to
them are pulled high by the internal pullups, and in
that state can be used as inputs. As inputs, Port 3
pins that are externally pulled low will source current
(IIL, on the data sheet) because of the pullups.
4
相关PDF资料
PDF描述
S80C51FA-1 8-BIT, 16 MHz, MICROCONTROLLER, PQFP44
S83C51FA-33 8-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP44
S87C51FA-2 8-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PQFP44
S83C51FC-3 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP44
S83C51FB-20 8-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
S83C51FA-33 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
S83C51FB 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
S83C51FB-1 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
S83C51FB-2 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
S83C51FB-20 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller