参数资料
型号: SAB-C167CS-4RM
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP144
封装: METRIC, PLASTIC, QFP-144
文件页数: 31/84页
文件大小: 1082K
代理商: SAB-C167CS-4RM
C167CS-4R
C167CS-L
Data Sheet
33
V2.2, 2001-08
Parallel Ports
The C167CS provides up to 111 I/O lines which are organized into eight input/output
ports and one input port. All port lines are bit-addressable, and all input/output lines are
individually (bit-wise) programmable as inputs or outputs via direction registers. The I/O
ports are true bidirectional ports which are switched to high impedance state when
configured as inputs. The output drivers of five I/O ports can be configured (pin by pin)
for push/pull operation or open-drain operation via control registers. During the internal
reset, all port pins are configured as inputs.
The input threshold of Port 2, Port 3, Port 7, and Port 8 is selectable (TTL or CMOS like),
where the special CMOS like input threshold reduces noise sensitivity due to the input
hysteresis. The input threshold may be selected individually for each byte of the
respective ports.
All port lines have programmable alternate input or output functions associated with
them. All port lines that are not used for these alternate functions may be used as general
purpose IO lines.
PORT0 and PORT1 may be used as address and data lines when accessing external
memory, while Port 4 outputs the additional segment address bits A23/19/17 … A16 in
systems where segmentation is enabled to access more than 64 KBytes of memory.
Port 2, Port 8 and Port 7 (and parts of PORT1) are associated with the capture inputs or
compare outputs of the CAPCOM units and/or with the outputs of the PWM module.
Port 6 provides optional bus arbitration signals (BREQ, HLDA, HOLD) and chip select
signals.
Port 3 includes alternate functions of timers, serial interfaces, the optional bus control
signal BHE/WRH, and the system clock output CLKOUT (or the programmable
frequency output FOUT).
Port 5 (and parts of PORT1) is used for the analog input channels to the A/D converter
or timer control signals.
The edge characteristics (transition time) and driver characteristics (output current) of
the C167CS’s port drivers can be selected via the Port Output Control registers
(POCONx).
相关PDF资料
PDF描述
SAK-C167CS-LM 16-BIT, 25 MHz, MICROCONTROLLER, PQFP144
SAB-C167CS-4R40M 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
SAK-C167CS-4R40M 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
SAK-C504-LM 8-BIT, 12 MHz, MICROCONTROLLER, PQFP44
SAB-C504-LM 8-BIT, 12 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
SAB-C167CS-L16M3V 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bi t Single-Chip Microcontroller
SAB-C167CS-L33M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SABC167CSL40M 制造商:Infineon Technologies AG 功能描述:
SAB-C167CS-L40M 制造商:Infineon Technologies AG 功能描述:Micro, 16Bit, 11KB RAM, 40MHz, 2xCAN
SAB-C167CS-L40M CA+ 功能描述:16位微控制器 - MCU 16BIT SNGL CHIP 5V 40MHz ROM less RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT