参数资料
型号: SAB-C167CS-4RM
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP144
封装: METRIC, PLASTIC, QFP-144
文件页数: 72/84页
文件大小: 1082K
代理商: SAB-C167CS-4RM
C167CS-4R
C167CS-L
Data Sheet
70
V2.2, 2001-08
Bus Cycle Control via READY Input
The duration of an external bus cycle can be controlled by the external circuitry via the
READY input signal.
Synchronous READY permits the shortest possible bus cycle but requires the input
signal to be synchronous to the reference signal CLKOUT.
Asynchronous READY puts no timing constraints on the input signal but incurs one
waitstate minimum due to the additional synchronization stage.
Notes (Valid for Table 19 and Figure 21)
1) Cycle as programmed, including MCTC waitstates (Example shows 0 MCTC WS).
2) Multiplexed bus modes have a MUX waitstate added after a bus cycle, and an additional MTTC waitstate may
be inserted here. For a multiplexed bus with MTTC waitstate this delay is 2 CLKOUT cycles, for a
demultiplexed bus without MTTC waitstate this delay is zero.
3) These timings are given for test purposes only, in order to assure recognition at a specific clock edge.
If the Asynchronous READY signal does not fulfill the indicated setup and hold times with respect to CLKOUT,
it must fulfill
tc27 in order to be safely synchronized.
Proper deactivation of READY is guaranteed if READY is deactivated in response to the trailing (rising) edge
of the corresponding command (RD or WR).
4) READY sampled HIGH at this sampling point generates a READY controlled waitstate,
READY sampled LOW at this sampling point terminates the currently running bus cycle.
5) If the next following bus cycle is READY controlled, an active READY signal must be disabled before the first
valid sample point for the next bus cycle. This sample point depends on the MTTC waitstate of the current
cycle, and on the MCTC waitstates and the ALE mode of the next following cycle. If the current cycle uses a
multiplexed bus the intrinsic MUX waitstate adds another CLKOUT cycle to the READY deactivation time.
Table 19
READY Timing (Operating Conditions apply)
Parameter
Symbol
Limit Values
Unit
min.
max.
Input setup time to CLKOUT rising edge
Valid for: READY input
tc25 CC
12
ns
Input hold time after CLKOUT rising edge
Valid for: READY input
tc26 CC
0
ns
Asynchronous READY input low time3)
tc27 CC
tc5 + tc25
ns
相关PDF资料
PDF描述
SAK-C167CS-LM 16-BIT, 25 MHz, MICROCONTROLLER, PQFP144
SAB-C167CS-4R40M 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
SAK-C167CS-4R40M 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
SAK-C504-LM 8-BIT, 12 MHz, MICROCONTROLLER, PQFP44
SAB-C504-LM 8-BIT, 12 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
SAB-C167CS-L16M3V 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bi t Single-Chip Microcontroller
SAB-C167CS-L33M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SABC167CSL40M 制造商:Infineon Technologies AG 功能描述:
SAB-C167CS-L40M 制造商:Infineon Technologies AG 功能描述:Micro, 16Bit, 11KB RAM, 40MHz, 2xCAN
SAB-C167CS-L40M CA+ 功能描述:16位微控制器 - MCU 16BIT SNGL CHIP 5V 40MHz ROM less RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT