- 您现在的位置：买卖IC网 > PDF目录69333 > SAF-C868A-1SGBA (INFINEON TECHNOLOGIES AG) 8-BIT, 40 MHz, MICROCONTROLLER, PDSO28 PDF资料下载
参数资料
| 型号： | SAF-C868A-1SGBA |
| 厂商： | INFINEON TECHNOLOGIES AG |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 8-BIT, 40 MHz, MICROCONTROLLER, PDSO28 |
| 封装： | PLASTIC, SO-28 |
| 文件页数： | 13/82页 |
| 文件大小： | 1252K |
| 代理商： | SAF-C868A-1SGBA |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页当前第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页
C868
Data Sheet
20
V 1.0, 2003-05
Reset and Brownout
The reset input is an active low input. An internal Schmitt trigger is used at the input for
noise rejection. The RESET pin must be held low for at least tbd usec. But the CPU will
only exit from reset condition after the PLL lock had been detected.
During RESET at transition from low to high, C868 will go into normal mode if ALE/BSL
is high and bootstrap loading mode if ALE/BSL is low. A pullup to VDDP or pulldown to
ground is recommended for pin ALE/BSL. TXD should have a pullup to VDDP and should
not be stimulated externally during reset, as a logic low at this pin will cause the chip to
go into test mode if ALE/BSL is low.
Figure 10 shows the possible reset circuits, note that the RESET pin does not have an
internal pullup resistance.
Figure 10
Reset Circuitries
An on-chip analog circuit detects brownout, if the core voltage VDDC dips below the
threshold voltage VTHRESHOLD momentarily while RESET pin is high. If this detection is
active for tbd usec then the device will reset.
When VDDC recovers by exceeding
VTHRESHOLD while RESET is high, the reset is released once PLL is locked for 4096
clocks. Bit BO in the PMCON0 register is set when brownout detected if brownout
detection was enabled, this bit is cleared by hardware reset RESET and software. All
ports are tristated during brownout.
The VTHRESHOLD has a nominal value of 1.47V, a minimum value of 1.1V and a
maximum value of 1.8V.
RESET
C868 BA
a)
RESET
C868 BA
&
RESET
C868 BA
b)
c)
VDDP
相关PDF资料 |
PDF描述 |
|---|---|
| SAF-C868P-1SGBA | 8-BIT, 40 MHz, MICROCONTROLLER, PDSO28 |
| SAK-C868A-1SGBA | 8-BIT, 40 MHz, MICROCONTROLLER, PDSO28 |
| SAK-C868-1RRBA | 8-BIT, MROM, 40 MHz, MICROCONTROLLER, PDSO38 |
| SAF-TC1130-L150EB-GBB | 32-BIT, FLASH, 150 MHz, MICROCONTROLLER, PBGA208 |
| SAF-XC164D-32F40F | 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP100 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SAF-C868P-1SR BA | 功能描述:IC MCU 8BIT ROM/LESS TSSOP-38-1 RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:C5xx/C8xx 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:260 系列:73S12xx 核心处理器:80515 芯体尺寸:8-位 速度:24MHz 连通性:I²C，智能卡，UART/USART，USB 外围设备:LED，POR，WDT 输入/输出数:9 程序存储器容量:64KB（64K x 8） 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:2K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 5.5 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-VFQFN 裸露焊盘 包装:管件 |
| SAFC869MF70T | 制造商:MURATA 制造商全称:Murata Manufacturing Co., Ltd. 功能描述:CERAMIC MICROWAVE FILTERS SAW FILTERS |
| SAFC881.5MC90T | 制造商:MURATA 制造商全称:Murata Manufacturing Co., Ltd. 功能描述:CERAMIC MICROWAVE FILTERS SAW FILTERS |
| SAFC881.5MD90T | 制造商:MURATA 制造商全称:Murata Manufacturing Co., Ltd. 功能描述:CERAMIC MICROWAVE FILTERS SAW FILTERS |
| SAFC881.5MWC90T | 制造商:MURATA 制造商全称:Murata Manufacturing Co., Ltd. 功能描述:CERAMIC MICROWAVE FILTERS SAW FILTERS |
发布紧急采购，3分钟左右您将得到回复。