参数资料
型号: SAF-XC164SM-16F40F
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
封装: 0.50 MM PITCH, GREEN, PLASTIC, TQFP-64
文件页数: 20/67页
文件大小: 1960K
代理商: SAF-XC164SM-16F40F
XC164SM
Derivatives
Functional Description
Data Sheet
25
V1.2, 2007-03
3.5
Capture/Compare Unit (CAPCOM2)
The CAPCOM unit supports generation and control of timing sequences on up to
16 channels with a maximum resolution of 1 system clock cycle (8 cycles in staggered
mode). The CAPCOM unit is typically used to handle high speed I/O tasks such as pulse
and waveform generation, pulse width modulation (PWM), Digital to Analog (D/A)
conversion, software timing, or time recording relative to external events.
Two 16-bit timers (T7/T8) with reload registers provide two independent time bases for
the capture/compare register array.
The input clock for the timers is programmable to several prescaled values of the internal
system clock, or may be derived from an overflow/underflow of timer T6 in module GPT2.
This provides a wide range of variation for the timer period and resolution and allows
precise adjustments to the application specific requirements. In addition, an external
count input for CAPCOM timer T7 allows event scheduling for the capture/compare
registers relative to external events.
The capture/compare register array contains 16 dual purpose capture/compare
registers, each of which may be individually allocated to either CAPCOM timer (T7 or T8,
respectively), and programmed for capture or compare function.
10 registers of the CAPCOM2 module have each one port pin associated with it which
serves as an input pin for triggering the capture function, or as an output pin to indicate
the occurrence of a compare event.
When a capture/compare register has been selected for capture mode, the current
contents of the allocated timer will be latched (‘captured’) into the capture/compare
Table 6
Compare Modes (CAPCOM2)
Compare Modes
Function
Mode 0
Interrupt-only compare mode;
Several compare interrupts per timer period are possible
Mode 1
Pin toggles on each compare match;
Several compare events per timer period are possible
Mode 2
Interrupt-only compare mode;
Only one compare interrupt per timer period is generated
Mode 3
Pin set ‘1’ on match; pin reset ‘0’ on compare timer overflow;
Only one compare event per timer period is generated
Double Register
Mode
Two registers operate on one pin;
Pin toggles on each compare match;
Several compare events per timer period are possible
Single Event Mode
Generates single edges or pulses;
Can be used with any compare mode
相关PDF资料
PDF描述
SAF-XC164SM-4F40F 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
SAF-XC164SM-8F20F 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
SAF-XC2234N-24F66L 16-BIT, FLASH, 66 MHz, RISC MICROCONTROLLER, PQFP100
SAF-XC2236N-16F40L 16-BIT, FLASH, 40 MHz, RISC MICROCONTROLLER, PQFP100
SAF-XC2236N-40F80L 16-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
SAF-XC164SM-16F40F BA 功能描述:16位微控制器 - MCU 16-Bit Single-Chip 5V 40MHz Flash RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
SAF-XC164SM-4F20F 制造商:Infineon Technologies AG 功能描述:16BIT MCU 32K FLASH SMD 164SM-4
SAF-XC164SM-4F20F AA 功能描述:16位微控制器 - MCU MICROCONTROLLER 16-BIT RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
SAFXC164SM4F20FAAXT 制造商:Infineon Technologies AG 功能描述:MCU 16-Bit XC166 CISC/DSP/RISC 32KB Flash 2.5V/5V 64-Pin TQFP
SAF-XC164SM-4F40F 制造商:Infineon Technologies AG 功能描述:16BIT MCU 32K FLASH SMD 164SM-4