参数资料
型号: SC16C750BIB64,151
厂商: NXP Semiconductors
文件页数: 18/44页
文件大小: 0K
描述: IC UART SINGLE W/FIFO 64-LQFP
产品培训模块: Stand-Alone UARTs
标准包装: 160
通道数: 1,UART
FIFO's: 64 字节
电源电压: 2.5V,3.3V,5V
带自动流量控制功能:
带故障启动位检测功能:
带调制解调器控制功能:
带CMOS:
安装类型: 表面贴装
封装/外壳: 64-LQFP
供应商设备封装: 64-LQFP(10x10)
包装: 托盘
产品目录页面: 828 (CN2011-ZH PDF)
其它名称: 568-3284
935274403151
SC16C750BIB64-S
SC16C750B_5
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 05 — 17 October 2008
25 of 44
NXP Semiconductors
SC16C750B
5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
7.8 Modem Status Register (MSR)
This register provides the current state of the control interface signals from the modem, or
other peripheral device to which the SC16C750B is connected. Four bits of this register
are used to indicate the changed information. These bits are set to a logic 1 whenever a
control input from the modem changes state. These bits are set to a logic 0 whenever the
CPU reads this register.
[1]
Whenever any MSR[0:3] is set to logic 1, a Modem Status Interrupt will be generated.
Table 21.
Modem Status Register bits description
Bit
Symbol
Description
7
MSR[7]
Data Carrier Detect. DCD (active HIGH, logic 1). Normally this bit is the
complement of the DCD input. In the Loopback mode this bit is equivalent to
the OUT2 bit in the MCR register.
6
MSR[6]
Ring Indicator. RI (active HIGH, logic 1). Normally this bit is the complement
of the RI input. In the Loopback mode this bit is equivalent to the OUT1 bit in
the MCR register.
5
MSR[5]
Data Set Ready. DSR (active HIGH, logic 1). Normally this bit is the
complement of the DSR input. In Loopback mode this bit is equivalent to the
DTR bit in the MCR register.
4
MSR[4]
Clear To Send. CTS. CTS functions as hardware ow control signal input if it
is enabled via MCR[5]. Flow control (when enabled) allows starting and
stopping the transmissions based on the external modem CTS signal. A
logic 1 at the CTS pin will stop SC16C750B transmissions as soon as current
character has nished transmission. Normally MSR[4] is the complement of
the CTS input. However, in the Loopback mode, this bit is equivalent to the
RTS bit in the MCR register.
3
MSR[3]
DCD [1]
logic 0 = no DCD change (normal default condition)
logic 1 = the DCD input to the SC16C750B has changed state since the last
time it was read. A modem Status Interrupt will be generated.
2
MSR[2]
RI [1]
logic 0 = no RI change (normal default condition)
logic 1 = the RI input to the SC16C750B has changed from a logic 0 to a
logic 1. A modem Status Interrupt will be generated.
1
MSR[1]
DSR [1]
logic 0 = no DSR change (normal default condition)
logic 1 = the DSR input to the SC16C750B has changed state since the last
time it was read. A modem Status Interrupt will be generated.
0
MSR[0]
CTS [1]
logic 0 = no CTS change (normal default condition)
logic 1 = the CTS input to the SC16C750B has changed state since the last
time it was read. A modem Status Interrupt will be generated.
相关PDF资料
PDF描述
SC16C752BIBS,157 IC DUAL UART 64BYTE 32HVQFN
SC16C752IB48,128 IC DUAL UART 64BYTE 48LQFP
SC16C754BIB80,557 IC UART QUAD W/FIFO 80-LQFP
SC16C850IBS/Q900,5 IC UART SGL UNIV ASYNC 36-VFQFN
SC16C852VIET,151 IC UART DUAL W/FIFO 36TFBGA
相关代理商/技术参数
参数描述
SC16C750BIB64-F 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C750BIB64-S 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C750BIBS 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C750BIBS,128 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C750BIBS,151 功能描述:UART 接口集成电路 1CH. UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel