- 您现在的位置：买卖IC网 > PDF目录299886 > SD-15900JH-300 (DATA DEVICE CORP) SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, PQCC84 PDF资料下载
参数资料
| 型号： | SD-15900JH-300 |
| 厂商： | DATA DEVICE CORP |
| 元件分类： | 位置变换器 |
| 英文描述： | SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, PQCC84 |
| 文件页数： | 3/8页 |
| 文件大小： | 373K |
| 代理商： | SD-15900JH-300 |
3
INTERFACING
FIGURE 2 shows a typical application using an SD-14620
Synchro/Resolver-to-Digital Converter and an SD-15900.
The eight Most Significant Bits (MSB’s) of angular information
from the course synchro/resolver converter, along with the eight
Most Significant Bits and eight Least Significant Bits (LSB’s) of
the fine converter are wired together as an 8-bit data bus, and
are connected to the 8-bit data bus input of the code converter
SD-15900.
The Inhibit (INH) signal from the combiner is connected to both
the fine and course synchro/resolver converters Inhibit inputs.
The three Enable signals (COURSE, FINEHI, FINELO) from the
combiner are connected to the associated Enable pins on the
synchro/resolver converters, i.e., Enable Course MSB’s, Enable
Fine MSB’s, and Enable Fine LSB’s.
The Hold input to the combiner can be driven by user-designed
circuitry if it is necessary to momentarily freeze the angular infor-
mation from the combiner based on the specific application.
The CLKOUT of the combiner generates a free running clock of
approximately 8 MHz and can be connected to the CLKIN of the
combiner for stand alone self clocking applications. The CLKIN
is divided by eight to create the internal clock. If it is necessary
to synchronize the clock of the combiner with a user clock, the
user clock can be connected to the CLKIN of the combiner
instead of the combiner-generated CLKOUT. The stability of the
clock is not important to the combiner circuitry and is used only
to set the rate at which the combiner samples the data from the
two synchro/resolver converters. Sampling of the angular data
from the two synchro/resolver converters occurs at the internal
clock rate divided by eight.
FIGURE 2. SD-15900 TYPICAL APPLICATION
BITS 1..16
IN<1..8>
OUT <1..16>
+5V
S1 ch.A
S2 ch.A
S3 ch.A
S4 ch.A
RH ch.A
RL ch.A
S1 ch.B
S2 ch.B
S3 ch.B
RH ch.B
S4 ch.B
INH
EMA
EMB
ELB
RL ch.B
COURSE
FINE
SD-15900
SD-14620
VPP
VCC
RES_L
ENHIGH
ENLOW
ENMID
MODE
GND
CLKIN
CLKOUT
FINELO
FINEHI
COURSE
INH
HOLD
相关PDF资料 |
PDF描述 |
|---|---|
| SD03-153-FREQ-OUT1 | CRYSTAL OSCILLATOR, SINE OUTPUT, 24 MHz - 500 MHz |
| SD15M32000Z/AA-14 | 15 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, SOLDER |
| SD15M32000Z/AA-15 | 15 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, SOLDER |
| SD25F00000-14 | 25 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, CRIMP |
| SD25F00000-15 | 25 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, CRIMP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SD-15A-05 | 功能描述:DC/DC转换器 15W 5V 3A Input 9.2-18VDC RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| SD-15A-12 | 功能描述:DC/DC转换器 15W 12V 1.25A Input 9.2-18VDC RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| SD-15A24 | 制造商:Mean Well 功能描述:DC-DC converter, 9.2-18Vin, 24Vdc 0.625A |
| SD-15A-24 | 功能描述:DC/DC转换器 15W 24V 0.625A Input 9.2-18VDC RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| SD-15A-5 | 功能描述:DC/DC转换器 5V 3A 15W 9.2-18VDC RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
发布紧急采购，3分钟左右您将得到回复。