- 您现在的位置：买卖IC网 > PDF目录1243 > SKP16C26A (Renesas Electronics America)DEV EVALUATION KIT M16C/26A PDF资料下载
参数资料
| 型号： | SKP16C26A |
| 厂商： | Renesas Electronics America |
| 文件页数： | 16/22页 |
| 文件大小： | 0K |
| 描述： | DEV EVALUATION KIT M16C/26A |
| 其它有关文件： | SKP16C26A Schematic |
| 标准包装： | 1 |
Applications Engineering
A.2 KD30 Problems
This section discusses the cause of the problem and countermeasures to resolve it. The common
problems encountered with KD30 are:
? USB option cannot be selected from the initialization screen
? Cannot connect to target
? KD30 already exists
? Issues that may come up during debug operations
A.2.1 USB Option Unavailable
When USB cannot be selected from KD30’s Init dialog box, you might be using an old version of
KD30 that does not support USB. Uninstall this version of KD30 and install latest version of KD30
from the \Tools\KD30 directory of the SKP CD.
A.2.2 Cannot Connect to Target
When the message ‘Can’t connect with the target’ is displayed after KD30 startup, there are
several reasons that may cause this message to appear. Each cause and the corresponding
countermeasure are discussed below.
?
The SKP is not connected correctly.
Please connect the ICD to your PC. Note: Regardless of whether the ICD is bus or target-
powered, please connect target board to ICD board first before plugging the USB cable to
your PC. Please see section 4 on system (SKP16C26A) connectivity.
?
The ICD has no power (Power LED on ICD is off).
Please ensure that the Power Mode switch on the ICD is on the ‘USB’ side. In ‘Target’
position, the ICD is powered from the target side.
?
USB was not selected on the Init dialog box.
Please select ‘USB’ from the Init dialog box that is displayed right after you start KD30.
?
The selected MCU on the ICD board and the actual target MCU (M16C/26A) do not
match.
Close the error message by clicking on ‘OK’ button, and then click on the ‘Cancel’ button of
the KD30 Init window to close KD30. Make sure you select ‘M30280FA.mcu’. If the MCU
loaded on the ICD is different, KD30 will re-program the ICD to match it.
?
The target MCU is damaged.
Try a different target board and see if KD30 will come up as you may have a damaged board
or MCU.
SKP16C26A User’s Manual Rev. 1.0
15 / 21
June 2004
相关PDF资料 |
PDF描述 |
|---|---|
| SKP32C85-100-CL | DEV EVALUATION KIT M32C/85 100PN |
| SKP8CMINI-13 | BOARD DEV EVALUATION FOR R8C/13 |
| SKP8CMINI-17 | KIT EVAL STARTER FOR R8C/17 |
| SKP8CMINI | DEV EVALUATION KIT R8C/11 |
| SL03 10001 | CURRENT LIMITER INRUSH 10 OHM 1A |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SKP16CMINI28 | 功能描述:DEV EVALUATION KIT SKP16CMINI28 RoHS:否 类别:编程器，开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 传感器类型:CMOS 成像，彩色（RGB） 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP |
| SKP202 | 制造商:SANKEN 制造商全称:Sanken electric 功能描述:N-Channel MOS FET |
| SKP202VR | 制造商:Sanken Electric Co Ltd 功能描述:MOSFET N-CH 200V 45A TO-263 |
| SKP221M1AE11VMP | 制造商:JAMICON 功能描述: |
| SKP2-30 | 制造商:Tamura Corporation of America 功能描述:Ind Power Toroid 45uH 1KHz RDL |
发布紧急采购，3分钟左右您将得到回复。