- 您现在的位置：买卖IC网 > PDF目录373464 > SN65HVD22EVM (Texas Instruments, Inc.) SN65HVD22 Evaluation Module(SN65HVD22评估模块) PDF资料下载
参数资料
| 型号： | SN65HVD22EVM |
| 厂商： | Texas Instruments, Inc. |
| 英文描述： | SN65HVD22 Evaluation Module(SN65HVD22评估模块) |
| 中文描述： | SN65HVD22评估模块（SN65HVD22评估模块） |
| 文件页数： | 9/25页 |
| 文件大小： | 398K |
| 代理商： | SN65HVD22EVM |
Signal Paths
1-3
Introduction
Figure 1-2.SN65HVD22 Evaluation Module (EVM)
Note that the EVM printed circuit board includes a location (U1) for a full-duplex
transceiver. This allows for future EVM configurations using the same board.
1.2
Signal Paths
The signal paths on this EVM include coaxial connectors (J7 and J8) for
connecting to test equipment, and differential connection points (W17 and
W18) for connecting to an RS-485 bus. Two banana jacks (J17 and J18)
provide for power and ground connections. Jumpers (W3 and W4) in the circuit
can be used to set the transceiver enabling. Jumper W11 is used to select the
common-mode voltage (V
CM
) test conditions. Additional test points are
provided in the circuit to facilitate measurements of critical signals.
Table 1-1 lists the EVM connections.
Table 1-1.HVD22 EVM Connections
Connection
Label
Description
J17
Vcc2
Power supply for HVD22 device
J18
GND2
Power supply ground
J7
RECEIVER
Receiver output, R (pin 1)
J8
DRIVER INPUT
Driver input, D (pin 4)
P3, W17, W18
TRANSCEIVER I/O
RS-485 BUS I/O (pins 6 and 7)
TP3
R
Receiver output (pin 1)
TP4
Driver input, D (pin 4)
TP6
EXT_V2
Externally applied Vcm
W3
RECEIVER
Receiver enable, RE, (pin 2)
W4
DRIVER
Driver enable, DE, (pin 3)
W11
TRANSCEIVER VCM SELECT
Select between Vcm choices:
None, GND2, External
相关PDF资料 |
PDF描述 |
|---|---|
| SN65HVD2 | EXTENDED COMMON-MODE RS-485 TRANSCEIVERS |
| SN65HVD3082(中文) | LOW-POWER RS-485 TRANSCEIVER(低功耗RS-485接口) |
| SN65HVD3082 | LOW-POWER RS-485 TRANSCEIVER(低功耗RS-485接口) |
| SN65HVD36 | Linear 1-Cell Li-Ion Charger w/Thermal Regulation, 6.5V OVP, Charge Enable 10-SON -40 to 85 |
| SN65HVD36D | Linear 1-Cell Li-Ion Charger w/ Thermal Regulation, 10.5V OVP, Temp Sense 10-SON -40 to 85 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SN65HVD22P | 功能描述:RS-485接口IC Extended Common-mode Transceiver RoHS:否 制造商:Texas Instruments 数据速率:250 Kbps 工作电源电压:3.3 V 电源电流:750 uA 工作温度范围:- 40 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
| SN65HVD22PE4 | 功能描述:总线收发器 Extended Common-mode Transceiver RoHS:否 制造商:Fairchild Semiconductor 逻辑类型:CMOS 逻辑系列:74VCX 每芯片的通道数量:16 输入电平:CMOS 输出电平:CMOS 输出类型:3-State 高电平输出电流:- 24 mA 低电平输出电流:24 mA 传播延迟时间:6.2 ns 电源电压-最大:2.7 V, 3.6 V 电源电压-最小:1.65 V, 2.3 V 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-48 封装:Reel |
| SN65HVD23 | 制造商:TI 制造商全称:Texas Instruments 功能描述:EXTENDED COMMON-MODE RS-485 TRANSCEIVERS |
| SN65HVD23_10 | 制造商:TI 制造商全称:Texas Instruments 功能描述:Extended Common-Mode RS-485 Transceivers |
| SN65HVD230 | 制造商:TI 制造商全称:Texas Instruments 功能描述:3.3-V CAN TRANSCEIVERS |
发布紧急采购，3分钟左右您将得到回复。