- 您现在的位置：买卖IC网 > PDF目录297419 > SN75107AJ (TEXAS INSTRUMENTS INC) DUAL LINE RECEIVER, CDIP14 PDF资料下载
参数资料
| 型号： | SN75107AJ |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | Buffer和线驱动 |
| 英文描述： | DUAL LINE RECEIVER, CDIP14 |
| 文件页数： | 8/19页 |
| 文件大小： | 296K |
| 代理商： | SN75107AJ |
SN55107A, SN75107A, SN75107B, SN75108A
DUAL LINE RECEIVERS
SLLS069D – JANUARY 1977 – REVISED APRIL 1998
16
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
APPLICATION INFORMATION
repeaters for long lines
In some cases, the driven line may be so long that the noise level on the line reaches the common-mode limits
or the attenuation becomes too large and results in poor reception. In such a case, a simple application of a
receiver and a driver as repeaters [shown in Figure 19(a)] restores the signal level and allows an adequate
signal level at the receiving end. If multichannel operation is desired, then proper gating for each channel must
be sent through the repeater station using another repeater set as in Figure 19(b).
Driver
Strobe
Ckt
P
Receiver
P
Data In
Clock In
Data Out
(a) SINGLE-CHANNEL LINE
(b) MULTICHANNEL LINE WIDTH WITH STROBE
Repeaters
Data In
Driver
Receiver
Driver
Receiver
Driver
Receiver
Driver
Receiver
Data Out
Figure 19. Receiver-Driver Repeaters
receiver as dual differential comparator
There are many applications for differential comparators, such as voltage comparison, threshold detection,
controlled Schmitt triggering, and pulse-width control.
As a differential comparator, a ’107A or SN75108A can be connected to compare the noninverting input terminal
with the inverting input as shown in Figure 20. The output is high or low, resulting from the A input being greater
or less than the reference. The strobe inputs allow additional control over the circuit so that either output, or both,
can be inhibited.
Strobe 1, 2
Reference 1
Reference 2
Strobe 2
Strobe 1
Output 1
Output 2
1A
1B
2A
2B
Figure 20. SN75107A Series Receiver as a Dual Differential Comparator
相关PDF资料 |
PDF描述 |
|---|---|
| SN75107BJ | DUAL LINE RECEIVER, CDIP14 |
| SN75153J-00 | LINE DRIVER, CDIP16 |
| SN75HVD08 | 3.3/5-V RS-485 Transceiver |
| SN75HVD08D | WIDE SUPPLY RANGE RS-485 TRANSCEIVER |
| SN75LBC976DL | LINE TRANSCEIVER, PDSO56 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SN75107AN | 功能描述:总线接收器 Dual Line RoHS:否 制造商:Texas Instruments 接收机数量:4 接收机信号类型:Differential 接口类型:EIA/TIA-422-B, V.11 工作电源电压:3.3 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:TSSOP-16 封装:Reel |
| SN75107AN | 制造商:Texas Instruments 功能描述:LINE RECEIVER DUAL 75107 DIP14 |
| SN75107ANE4 | 功能描述:缓冲器和线路驱动器 DUAL LINE RECEIVER RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel |
| SN75107ANS | 制造商:Rochester Electronics LLC 功能描述: 制造商:Texas Instruments 功能描述: |
| SN75107ANSR | 功能描述:缓冲器和线路驱动器 DUAL LINE RECEIVER RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。