- 您现在的位置：买卖IC网 > PDF目录10200 > SP238ACT-L/TR (Exar Corporation)IC DVR/RCVR RS232 MULTI 24WSOIC PDF资料下载
参数资料
| 型号： | SP238ACT-L/TR |
| 厂商： | Exar Corporation |
| 文件页数： | 11/12页 |
| 文件大小： | 0K |
| 描述： | IC DVR/RCVR RS232 MULTI 24WSOIC |
| 标准包装： | 1,500 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 4/4 |
| 规程： | RS232 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 24-SOIC W |
| 包装： | 带卷 (TR) |
Exar Corporation 48720 Kato Road, Fremont CA, 94538 (50)668-707 www.exar.com
SP238A_00_0740
8
transmitted Data (tD or tX)
This is the pin on which the computer sends the
actual data signal to be transmitted, i.e. a positive
voltage (+3V to +5V) to represent a logic “0”,
and a negative voltage (-3V to -5V) to represent
a logic “”. The PC would send the data on this
line to be transmitted by the modem.
Ring indicator (Ri)
This line is used by the peripheral device to tell
the computer that a remote device wants to start
communicating.Themodemwouldactivatethe
Ri
line to tell the computer that the remote modem
was calling, i.e. the phone is ringing.
Data carrier Detect (DcD)
This line is used by the modem to tell the com-
puter that it has completed a transmission path
with the remote modem, and to expect to start
receiving data at any time.
Received Data (RD or RX)
This is the pin on which the modem sends the
computer the incoming data signal, i.e. a positive
voltage (+3V to +5V) to represent a logic “0”,
and a negative voltage (-3V to -5V) to represent
a logic “”.
inteRFace eXaMPle - a PRinteR on
tHe ibM Pc SeRial PoRt
TheRS-232standarddefines22serialinterface
signals. These signals consist of ground lines,
timing, data, control and test signals, plus a set
of signals rarely used for a second data channel.
Many of these signal lines are not used in typical
RS-232applications;infact,theIBM PC serial
port is implemented using only nine pins. For ex-
ample, consider the case of a PC using this nine
pin port to communicate with a peripheral device
such as a printer. We see the following activity on
each of the RS-232 lines as
the computer and
printer are activated and communicate.
Signal Ground (GnD)
The Signal Ground pin acts as a reference for all
the other signals. This pin is simply maintained
at a 0V level to serve as a level to which all other
signalsarereferenced.BoththePCandtheprinter
will have this line connected to their respective
internal ground lines.
ibM Printer Port interconnections
Data terminal Ready (DtR)
This is the pin the computer uses to tell peripheral
devices that it is on-line and ready to communi-
cate.Oncethecomputerispowered-upandready,
it will send out a signal on the
DtR to inform the
printer that it is powered-up and ready to go. The
printer really doesn’t care, since it will simply print
data as it is received. Accordingly, this pin is not
needed at the printer.
Data Set Ready (DSR)
Peripheraldevicesusethislinetotellthecomputer
that they are on-line and ready to communicate.
When the printer is turned on and has completed
its self-test routine (assuming it does one), it will
send a signal to the PC by asserting this line.
Request to Send (RtS)
The computer activates this line to notify the
peripheral device that it is ready to send data. In
thisexample,thecomputernotifiestheprinter
that it is ready to send data to be printed by the
printer.
clear to Send (ctS)
This is the line on which the peripheral device tells
the computer that it is ready to receive data from
the computer. If the printer was not ready, i.e. it
was out of paper, for example, it would not assert
this line. Once the printer was ready to receive
data from the PC, it would assert this line. When
it receives the
ctS signal from the printer, the PC
knows that a data transmission path has been
established between itself and the printer.
application examples
相关PDF资料 |
PDF描述 |
|---|---|
| ADM232LJR-REEL | IC TXRX RS-232 DUAL 5V 16SOIC |
| ADM101EARM-REEL7 | IC TXRX RS-232 SINGLE 5V 10MSOP |
| CXS3106A1610S | CONN PLUG 3POS STRGHT SKT |
| VE-2WP-MY | CONVERTER MOD DC/DC 13.8V 50W |
| VE-2WN-MY | CONVERTER MOD DC/DC 18.5V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SP238ACX | 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:+5V Powered Multi-Channel RS-232 Drivers/Receivers |
| SP238AES | 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:+5V Powered Multi-Channel RS-232 Drivers/Receivers |
| SP238AES-L | 制造商:Exar Corporation 功能描述: |
| SP238AET | 制造商:Exar Corporation 功能描述: |
| SP238AET/TR | 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:+5V Powered Multi-Channel RS-232 Drivers/Receivers |
发布紧急采购，3分钟左右您将得到回复。