- 您现在的位置：买卖IC网 > PDF目录372174 > SP3203EEY 5V High-Speed RS-232 Transceivers with 0.1uF Capacitors PDF资料下载
参数资料
| 型号： | SP3203EEY |
| 元件分类： | RS-232 |
| 英文描述： | 5V High-Speed RS-232 Transceivers with 0.1uF Capacitors |
| 中文描述： | 5V的高速RS - 232收发器与0.1uF电容 |
| 文件页数： | 13/16页 |
| 文件大小： | 509K |
| 代理商： | SP3203EEY |
13
Rev.
2/7
/01
SP3203E
Copyright 2001 Sipex Corporation
ESD TOLERANCE
The SP3203E incorporates ruggedized ESD cells
on all driver output and receiver input pins. The
improved ESD tolerance is at least 15kV with-
out damage nor latch-up.
There are different methods of ESD testing
applied:
a) MIL-STD-883, Method 3015.7
b) IEC1000-4-2 Air-Discharge
c) IEC1000-4-2 Direct Contact
The Human Body Model has been the generally
accepted ESD testing method for semiconductors.
This method is also specified in MIL-STD-883,
Method 3015.7 for ESD testing. The premise of
this ESD test is to simulate the human body’s
potential to store electro-static energy and
discharge it to an integrated circuit. The
simulation is performed by using a test model as
shown in Figure 18. This method will test the
IC’s capability to withstand an ESD transient
during normal handling such as in manufacturing
areas where the ICs tend to be handled frequently.
The IEC-1000-4-2, formerly IEC801-2, is
generally used for testing ESD on equipment and
systems. For system manufacturers, they must
guarantee a certain amount of ESD protection
since the system itself is exposed to the outside
environment and human presence. The premise
with IEC1000-4-2 is that the system is required
to withstand an amount of static electricity when
ESD is applied to points and surfaces of the
equipment that are accessible to personnel during
normal usage. The transceiver IC receives most
of the ESD current when the ESD source is
applied to the connector pins. The test circuit for
IEC1000-4-2 is shown on Figure 19. There are
two methods within IEC1000-4-2, the Air
Discharge method and the Contact Discharge
method.
With the Air Discharge Method, an ESD voltage
is applied to the equipment under test (EUT)
through air. This simulates an electrically charged
person ready to connect a cable onto the rear of
the system only to find an unpleasant zap just
before the person touches the back panel. The
high energy potential on the person discharges
through an arcing path to the rear panel of the
system before he or she even touches the system.
This energy, whether discharged directly or
through air, is predominantly a function of the
discharge current rather than the discharge
voltage. Variables with an air discharge such as
approach speed of the object carrying the ESD
potential to the system and humidity will tend to
change the discharge current. For example, the
rise time of the discharge current varies with the
approach speed.
The Contact Discharge Method applies the ESD
current directly to the EUT. This method was
devised to reduce the unpredictability of the
ESD arc. The discharge current rise time is
constant since the energy is directly transferred
without the air-gap arc. In situations such as
hand held systems, the ESD charge can be directly
discharged to the equipment from a person already
holding the equipment. The current is transferred
on to the keypad or the serial port of the equipment
directly and then travels through the PCB and finally
to the IC.
The circuit model in Figures 18
and 19 represent
the typical ESD testing circuit used for all three
methods. The C
S
is initially charged with the DC
R
R
C
C
C
C
S
S
R
R
S
S
SW1
SW2
R
C
Device
Under
Test
DC Power
Source
C
S
S
Figure 18. ESD Test Circuit for Human Body Model
相关PDF资料 |
PDF描述 |
|---|---|
| SP320 | 5V High-Speed RS-232 Transceivers with 0.1uF Capacitors |
| SP320ACF | 5V High-Speed RS-232 Transceivers with 0.1uF Capacitors |
| SP3220B | Low Power 5V RS232 Dual Driver/Receiver with 0.1?μF Capacitors; Package: SO; No of Pins: 16; Temperature Range: -40?°C to 85?°C |
| SP3220UCA | 320 x 240 pixel format, LED or CFL Backlight |
| SP3220UEA | 320 x 240 pixel format, 5.7in. Display |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SP3203EEY/TR | 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:3V RS-232 Serial Transceiver with Logic Selector and15kV ESD Protection |
| SP3203EEY-L | 功能描述:RS-232接口集成电路 RS232 250 kbps temp -40C to 85C RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
| SP3203EEY-L | 制造商:Exar Corporation 功能描述:IC RS-232 TRANSCEIVER 5.5V TSSOP-20 制造商:Exar Corporation 功能描述:IC, RS-232 TRANSCEIVER, 5.5V, TSSOP-20 |
| SP3203EEY-L/TR | 功能描述:RS-232接口集成电路 RS232 W/ 1.8V LOGIC 3-DRVR/2-RCVR RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
| SP3203EY | 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:3V RS-232 Serial Transceiver with Logic Selector |
发布紧急采购，3分钟左右您将得到回复。