l
Voidless-Hermetically-Sealed Unidirectiona
Transient Suppressors
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
Copyright
2004
10-11-2004 REV A
W
.Mi
cr
os
em
i
.C
O
M
S C O T TS DALE DIVISION
1N5610 thru 1N5613
1N5
610
–
1
N
5613
DESCRIPTION
APPEARANCE
This series of industry recognized voidless-hermetically-sealed Unidirectional
Transient Voltage Suppressor (TVS) designs is military qualified to MIL-PRF-
19500/434 and are ideal for high-reliability applications where a failure cannot be
tolerated. They provide a Working Peak “Standoff” Voltage selection from 30.5 to 175
Volts with 1500 W ratings. They are very robust in hard-glass construction and also
use an internal metallurgical bond identified as Category I for high reliability
applications. The 1500 W series is military qualified to MIL-PRF-19500/434. These
devices are also available in a surface mount MELF package configuration as a
special order. Microsemi also offers numerous other TVS products to meet higher and
lower peak pulse power and voltage ratings in both through-hole and surface-mount
packages.
“G” Package
FEATURES
APPLICATIONS / BENEFITS
High surge current and peak pulse power provides
transient voltage protection for sensitive circuits
Triple-layer passivation
Internal “Category I” metallurgical bonds
Voidless hermetically sealed glass package
JAN/TX/TXV military qualifications available per MIL-
PRF-19500/434 by adding JAN, JANTX, or JANTXV
prefix
Further options for screening in accordance with MIL-
PRF-19500 for JANS by using a “SP” prefix, e.g.
SP5610, SP5611, etc.
Surface Mount equivalents are also available in a
square-end-cap MELF configuration with a “US” suffix
as a special order item.
Military and other high reliability transient protection
Extremely robust construction
Working Peak “Standoff” Voltage (VWM) from 30.5
to 175 V
Available as 1500 W Peak Pulse Power (PPP)
ESD and EFT protection per IEC61000-4-2 and
IEC61000-4-4 respectively
Secondary lightning protection per select levels in
IEC61000-4-5
Flexible axial-leaded mounting terminals
Nonsensitive to ESD per MIL-STD-750 Method
1020
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
Operating & Storage Temperature: -55oC to +175oC
Peak Pulse Power at 25oC: 1500 Watts @ 10/1000 s
(also see Figures 1,2 and 4)
Impulse repetition rate (duty factor): 0.01%
Steady-State Power: 3.0 W @ TA = 25oC (see note
below and Figure 4)
Solder Temperatures: 260oC for 10 s (maximum)
CASE: Hermetically sealed voidless hard glass
with Tungsten slugs
TERMINATIONS: Axial-leads are Tin/Lead (Sn/Pb)
over copper
MARKING: Body painted and part number, etc.
POLARITY: Cathode band
Tape & Reel option: Standard per EIA-296
Weight: 1270 mg
See package dimensions on last page
NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from
mounting point to ambient is sufficiently controlled where TJ(MAX) is not exceeded.