参数资料
| 型号： | SQ48T15012-NBB0 |
| 厂商： | Power-One |
| 文件页数： | 5/64页 |
| 文件大小： | 0K |
| 描述： | CONV DC-DC 48V IN 1.2V OUT 18W |
| 标准包装： | 25 |
| 系列： | SQ48 |
| 类型： | 隔离 |
| 输出数： | 1 |
| 电压 - 输入（最小）： | 36V |
| 电压 - 输入（最大）： | 75V |
| Voltage - Output 1： | 1.2V |
| 电流 - 输出（最大）： | 15A |
| 电源（瓦） - 制造商系列： | 18W |
| 电压 - 隔离： | 2kV（2000V） |
| 安装类型： | 通孔 |
| 封装/外壳： | 8-DIP 模块，1/4 砖 |
| 尺寸/尺寸： | 2.30" L x 0.90" W x 0.34" H（58.4mm x 22.9mm x 8.6mm） |
| 包装： | 托盘 |
| 工作温度： | -40°C ~ 85°C |
| 电源（瓦特）- 最大： | 18W |
| 其它名称： | 179-2217 SQ48T15012-NAA0 SQ48T15012-NBBO |
第1页第2页第3页第4页当前第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页
SQ48 DC-DC Series Data Sheet
36-75 VDC Input; 1.0-12 VDC Output
Protection Features
Input Undervoltage Lockout
Input undervoltage lockout is standard with this
converter. The converter will shut down when the
To comply with safety agencies’ requirements, an
input line fuse must be used external to the converter.
The Table below provides the recommended fuse
rating for use with this family of products.
input voltage drops below a pre-determined voltage.
The input voltage must be typically 34 V for the
converter to turn on. Once the converter has been
Output Voltage
3.3 V
12 - 5.0 V, 2.5 V
Fuse Rating
4A
3A
turned on, it will shut off when the input voltage drops
typically below 32 V. This feature is beneficial in
preventing deep discharging of batteries used in
telecom applications.
Output Overcurrent Protection (OCP)
The converter is protected against overcurrent or
short circuit conditions. Upon sensing an overcurrent
condition, the converter will switch to constant
current operation and thereby begin to reduce output
voltage. When the output voltage drops below 50%
of the nominal value of output voltage, the converter
will shut down (Fig. x.17).
Once the converter has shut down, it will attempt to
restart nominally every 100 ms with a typical 1-2%
duty cycle (Fig. x.18). The attempted restart will
continue indefinitely until the overload or short circuit
conditions are removed or the output voltage rises
above 50% of its nominal value.
Once the output current is brought back into its
specified range, the converter automatically exits the
hiccup mode and continues normal operation.
Output Overvoltage Protection (OVP)
The converter will shut down if the output voltage
across Vout(+) (Pin 8) and Vout(-) (Pin 4) exceeds
the threshold of the OVP circuitry. The OVP circuitry
contains its own reference, independent of the output
voltage regulation loop. Once the converter has shut
down, it will attempt to restart every 100 ms until the
OVP condition is removed.
Overtemperature Protection (OTP)
The converter will shut down under an
overtemperature condition to protect itself from
overheating caused by operation outside the thermal
derating curves, or operation in abnormal conditions
such as system fan failure. After the converter has
cooled to a safe operating temperature, it will
automatically restart.
Safety Requirements
The converters meet North American and
International safety regulatory requirements per
UL60950 and EN60950. Basic Insulation is provided
between input and output.
2.0 - 1.2 V 2A
All SQ converters are UL approved for a maximum
fuse rating of 15 Amps. To protect a group of
converters with a single fuse, the rating can be
increased from the recommended values above.
Electromagnetic Compatibility (EMC)
EMC requirements must be met at the end-product
system level, as no specific standards dedicated to
EMC characteristics of board mounted component dc-
dc converters exist. However, Power-One tests its
converters to several system level standards, primary
of which is the more stringent EN55022, Information
technology equipment - Radio disturbance
characteristics - Limits and methods of measurement.
An effective internal LC differential filter significantly
reduces input reflected ripple current, and improves
EMC.
With the addition of a simple external filter (see
Application Note 100), all versions of the SQ48 Series
converters pass the requirements of Class B
conducted emissions per EN55022 and FCC
requirements. Please contact Power-One Applications
Engineering for details of this testing.
Characterization
General Information
The converter has been characterized for many
operational aspects, to include thermal derating
(maximum load current as a function of ambient
temperature and airflow) for vertical and horizontal
mounting, efficiency, startup and shutdown
parameters, output ripple and noise, transient
response to load step-change, overload, and short
circuit.
The figures are numbered as Fig. x.y, where x
indicates the different output voltages, and y
associates with specific plots (y = 1 for the vertical
thermal derating, …). For example, Fig. x.1 will refer
to the vertical thermal derating for all the output
voltages in general.
The following pages contain specific plots or
waveforms associated with the converter. Additional
comments for specific data are provided below.
SEP 14, 2005 revised to NOV 06, 2006
Page 5 of 64
www.power-one.com
相关PDF资料 |
PDF描述 |
|---|---|
| OSTTS12A15A | TERM BLOCK PLUG 7.5MM 12POS |
| OSTTT180181 | TERM BLOCK PLUG 5.0MM 18POS |
| OSTEM107152 | CONN TERM BLOCK 10POS 5MM |
| 74VHC240M | IC INVERTER DUAL 4-INPUT 20SOIC |
| 74HC4060BQ,115 | IC BINARY COUNTER 14ST 16DHVQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SQ48T15012-NBB0G | 制造商:Power-One 功能描述:Module DC-DC 1-OUT 1.2V 15A 50W 8-Pin 1/8-Brick 制造商:Power-One 功能描述:Conn Relay Socket SKT 14 POS Solder ST 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 1.2V 15A 50W - Bulk |
| SQ48T15012-NBBU | 制造商:Power-One 功能描述: |
| SQ48T15012-NDB0 | 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| SQ48T15012-NDB0G | 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 1.2V 15A 50W - Bulk |
| SQ48T15012-PBA0 | 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 1.2V 15A 50W - Bulk |
发布紧急采购，3分钟左右您将得到回复。