- 您现在的位置：买卖IC网 > PDF目录4252 > SST25LF020A-33-4C-SAE-T (Microchip Technology)IC FLASH SER 2MB 33HZ SPI 8SOIC PDF资料下载
参数资料
| 型号： | SST25LF020A-33-4C-SAE-T |
| 厂商： | Microchip Technology |
| 文件页数： | 8/27页 |
| 文件大小： | 0K |
| 描述： | IC FLASH SER 2MB 33HZ SPI 8SOIC |
| 标准包装： | 3,300 |
| 系列： | SST25 |
| 格式 - 存储器： | 闪存 |
| 存储器类型： | FLASH |
| 存储容量： | 2M (256K x 8) |
| 速度： | 33MHz |
| 接口： | SPI 串行 |
| 电源电压： | 3 V ~ 3.6 V |
| 工作温度： | 0°C ~ 70°C |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页
2 Mbit SPI Serial Flash
A Microchip Technology Company
SST25LF020A
Not Recommended for New Designs
Write Enable Latch (WEL)
The Write-Enable-Latch bit indicates the status of the internal memory Write Enable Latch. If the
Write-Enable-Latch bit is set to “1”, it indicates the device is Write enabled. If the bit is set to “0” (reset),
it indicates the device is not Write enabled and does not accept any memory Write (Program/Erase)
commands. The Write-Enable-Latch bit is automatically reset under the following conditions:
?
?
?
?
?
?
?
Power-up
Write-Disable (WRDI) instruction completion
Byte-Program instruction completion
Auto Address Increment (AAI) programming reached its highest memory address
Sector-Erase instruction completion
Block-Erase instruction completion
Chip-Erase instruction completion
Block Protection (BP1, BP0)
The Block-Protection (BP1, BP0) bits define the size of the memory area, as defined in Table 4, to be
software protected against any memory Write (Program or Erase) operations. The Write-Status-Regis-
ter (WRSR) instruction is used to program the BP1 and BP0 bits as long as WP# is high or the Block-
Protect-Lock (BPL) bit is 0. Chip-Erase can only be executed if Block-Protection bits are both 0. After
power-up, BP1 and BP0 are set to 1.
Block Protection Lock-Down (BPL)
WP# pin driven low (V IL ), enables the Block-Protection-Lock-Down (BPL) bit. When BPL is set to 1, it
prevents any further alteration of the BPL, BP1, and BP0 bits. When the WP# pin is driven high (V IH ),
the BPL bit has no effect and its value is “Don’t Care”. After power-up, the BPL bit is reset to 0.
Table 4: Software Status Register Block Protection 1
Status Register Bit
Protected Memory Area
Protection Level
0
1 (1/4 Memory Array)
2 (1/2 Memory Array)
3 (Full Memory Array)
BP1
0
0
1
1
BP0
0
1
0
1
2 Mbit
None
030000H-03FFFFH
020000H-03FFFFH
000000H-03FFFFH
T4.0 25080
1. Default at power-up for BP1 and BP0 is ‘11’.
Auto Address Increment (AAI)
The Auto Address Increment Programming-Status bit provides status on whether the device is in AAI
programming mode or Byte-Program mode. The default at power up is Byte-Program mode.
?2011 Silicon Storage Technology, Inc.
8
DS25080A
11/11
相关PDF资料 |
PDF描述 |
|---|---|
| XC6SLX75T-2CSG484I | IC FPGA SPARTAN 6 74K 484CSGBGA |
| XC6SLX100T-N3FGG484C | IC FPGA SPARTAN-6 484FPGA |
| 25LC640-E/SN | IC EEPROM 64KBIT 2MHZ 8SOIC |
| XC6SLX100-N3FGG676C | IC FPGA SPARTAN-6 676FBGA |
| SST25LF020A-33-4I-SAE-T | IC FLASH SER 2MB 33HZ SPI 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SST25LF020A-33-4E-QAE | 制造商:SST 制造商全称:Silicon Storage Technology, Inc 功能描述:2 Mbit SPI Serial Flash |
| SST25LF020A-33-4E-S2AE | 制造商:SST 制造商全称:Silicon Storage Technology, Inc 功能描述:2 Mbit / 4 Mbit SPI Serial Flash |
| SST25LF020A-33-4E-SA | 功能描述:闪存 2 Mbit 33MHz RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel |
| SST25LF020A-33-4E-SAE | 功能描述:闪存 2 Mbit 33MHz RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel |
| SST25LF020A-33-4I-QAE | 功能描述:闪存 2Mbit 33MHz RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。