参数资料
型号: T89C51AC2-RLTIM
厂商: Atmel
文件页数: 107/121页
文件大小: 0K
描述: IC 8051 MCU FLASH 32K 44VQFP
标准包装: 160
系列: 89C
核心处理器: 8051
芯体尺寸: 8-位
速度: 40MHz
连通性: UART/USART
外围设备: POR,PWM,WDT
输入/输出数: 34
程序存储器容量: 32KB(32K x 8)
程序存储器类型: 闪存
EEPROM 大小: 2K x 8
RAM 容量: 1.25K x 8
电压 - 电源 (Vcc/Vdd): 3 V ~ 5.5 V
数据转换器: A/D 8x10b
振荡器型: 外部
工作温度: -40°C ~ 85°C
封装/外壳: 44-LQFP
包装: 托盘
86
A/T89C51AC2
4127H–8051–02/08
Analog-to-Digital
Converter (ADC)
This section describes the on-chip 10 bit analog-to-digital converter of the
A/T89C51AC2. Eight ADC channels are available for sampling of the external sources
AN0 to AN7. An analog multiplexer allows the single ADC converter to select one from
the 8 ADC channels as ADC input voltage (ADCIN). ADCIN is converted by the 10-bit
cascaded potentiometric ADC.
Two modes of conversion are available:
- Standard conversion (8 bits).
- Precision conversion (10 bits).
For the precision conversion, set bit PSIDLE in ADCON register and start conversion.
The device is in a pseudo-idle mode, the CPU does not run but the peripherals are
always running. This mode allows digital noise to be as low as possible, to ensure high
precision conversion.
For this mode it is necessary to work with end of conversion interrupt, which is the only
way to wake the device up.
If another interrupt occurs during the precision conversion, it will be served only after
this conversion is completed.
Features
8 channels with multiplexed inputs
10-bit cascaded potentiometric ADC
Conversion time 16 micro-seconds (typ.)
Zero Error (offset) ± 2 LSB max
Positive External Reference Voltage Range (VAREF) 2.4 to 3.0 Volt (typ.)
ADCIN Range 0 to 3Volt
Integral non-linearity typical 1 LSB, max. 2 LSB
Differential non-linearity typical 0.5 LSB, max. 1 LSB
Conversion Complete Flag or Conversion Complete Interrupt
Selectable ADC Clock
ADC Port 1 I/O Functions Port 1 pins are general I/O that are shared with the ADC channels. The channel select
bit in ADCF register define which ADC channel/port1 pin will be used as ADCIN. The
remaining ADC channels/port1 pins can be used as general-purpose I/O or as the alter-
nate function that is available.
A conversion launched on a channel which are not selected on ADCF register will not
have any effect.
VAREF
VAREF should be connected to a low impedance point and must remain in the range
specified in Table 77. If the ADC is not used, it is recommended to connect VAREF to
VAGND.
相关PDF资料
PDF描述
DSPIC33FJ16GS402-I/MM IC DSPIC MCU/DSP 16K 28-QFN
T89C5115-TISIM IC 8051 MCU FLASH 16K 28SOIC
PIC18F27J13-I/SP IC PIC MCU 128KB FLASH 28SPDIP
T89C5115-TDSIM IC 8051 MCU FLASH 16K 24SOIC
52893-2090 CONN FFC 20POS .50MM R/A ZIF SMD
相关代理商/技术参数
参数描述
T89C51AC2-RLTI-M 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-bit MCU with 32K bytes Flash, 10 bits A/D and EEPROM
T89C51AC2-SLSC-M 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-bit MCU with 32K bytes Flash, 10 bits A/D and EEPROM
T89C51AC2-SLSE-M 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-bit MCU with 32K bytes Flash, 10 bits A/D and EEPROM
T89C51AC2-SLSIM 功能描述:IC 8051 MCU FLASH 32K 44PLCC RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:89C 标准包装:9 系列:87C 核心处理器:8051 芯体尺寸:8-位 速度:40/20MHz 连通性:UART/USART 外围设备:POR,WDT 输入/输出数:32 程序存储器容量:32KB(32K x 8) 程序存储器类型:OTP EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:- 振荡器型:内部 工作温度:0°C ~ 70°C 封装/外壳:40-DIP(0.600",15.24mm) 包装:管件
T89C51AC2-SLSI-M 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-bit MCU with 32K bytes Flash, 10 bits A/D and EEPROM