
TB1311AFG
2006-05-29
16
Register Name
Function
Preset Value
HV FREQ2
Input format setting.
Set the horizontal and vertical mode according to the format that is input.
When A-SYNC = ON mode, this setting is invalid.
00000: 15.625 kHz, 50 Hz (625i)
00001: 15.75 kHz, 60 Hz (525i)
00010: 31.25 kHz, 50 Hz (625p)
00011: 31.5 kHz, 60 Hz (525p, VGA @60 Hz)
00100: 28.125 kHz, 50 Hz (1125/50i)
00101: 33.75 kHz, 60 Hz (1125/60i)
00110: 37.5 kHz, 50 Hz (750/50p)
00111: 45 kHz, 60 Hz (750/60p, XGA @60 Hz)
01000: 31.25 kHz, 50 Hz (1250i)
01001: 37.9 kHz, 60 Hz (SVGA @60 Hz)
01010: 64 kHz, 60 Hz (1125/60p, SXGA @60 Hz)
01011: 75 kHz, 60 Hz (UXGA @60 Hz)
01100: 56.25 kHz, 50 Hz (1125/50p)
01101 to 01111: Not available
10000: 15.734 kHz, 30 Hz (525/30p)
10001: 27 kHz, 24 Hz (1125/24p)
10010: 28.125 kHz, 25 Hz (1125/25p)
10011: 33.75 kHz, 30 Hz (1125/30p)
10100: 27 kHz, 48 Hz (1125/24sf)
10101 to 11111: Not available
15.625 kHz, 50 Hz
(00000)
H COUNT MAX
Selects the H-sync count number for the higher threshold for the no-input detection.
0000: 32 counts
1111: 62 counts
(2 counts / step)
32 counts
(0000)
H COUNT MIN
Selects the H-sync count number for the lower threshold for the no-input detection.
000: 16 counts
111: 30 counts
(2 counts / step)
16 counts
(000)
SIG DET N
Selects the number of signal detections for the input existence threshold of the
no-input detection.
0000: 1 count
0001: 2 counts to 1111: 30 counts
(2 counts / step)
1 count
(0000)
SIG RESET N
Selects the number of signal detection for input non-existence threshold of the
no-input detection.
0000: 1 count
0001: 2 counts to 1111: 30 counts
(2 counts / step)
1 count
(0000)
SIG RESET
Resets the counter for no-input detection.
When 1 is sent, the counter for no-input detection is cleared at that time.
0: Normal
1: Reset
Normal
(0)
SIG SW
Selects the input to the counter for no-input detection.
0: SYNC2-IN (pin 15)
1: SYNC1-IN (pin 33)
SYNC2-IN
(0)
SIG DET IMPE
Changes the internal impedance for no-input detection.
The time constant of LPF for no-input detection is changed by this function and the
capacitor value of SYNC FILTER (pin 14).
00: 20 k
01: 15 k
10: 10 k
11: 6 k
20 k
(00)
SIG DET LVL
Changes the threshold for no-input detection.
00: 0.55 V
01: 0.80 V
10: 1.05 V
11: 1.30 V
0.55 V
(00)
TEST1,2,3
Test modes for shipping test. Set all zero.
all 0