参数资料
型号: TBU-PL085-100-WH
厂商: Bourns Inc.
文件页数: 2/7页
文件大小: 0K
描述: SURGE SUPP TBU DL 50OHM 850VIMP
标准包装: 1
系列: TBU™
电压 - 工作: 425V
电压 - 箝位: 850V
技术: 混合技术
电路数: 2
应用: SLIC
封装/外壳: SMD 6.50mm x 4.00mm
供应商设备封装: SMD
包装: 标准包装
其它名称: TBU-PL085-100-WHDKR
TBU-PL Series - TBU ? High-Speed Protectors
Functional Block Diagram
HIGH
Line 1 SLIC
Vss
Line 2 SLIC
CURRENT
SENSE
Vdd
VOLTAGE
COMPARATOR
Vss
Vdd
VOLTAGE
COMPARATOR
Vss
CURRENT
SENSE
VOLTAGE
SWITCH
+
+
HIGH
VOLTAGE
SWITCH
Line 1
Vdd
Line 2
Reference Application
The TBU-PL Series are high-speed protectors used in voice/
VoIP SLIC applications.The maximum voltage rating of the TBU ?
device should never be exceeded. Where necessary, an OVP
device should be employed to limit the maximum voltage. A cost-
effective protection solution combines Bourns ? TBU ? protection
devices with a pair of Bourns ? MOVs. For bandwidth sensitive
applications, a Bourns ? GDT may be substituted for the MOV. If
EN55024 EMC compliance is required, the TBU ? device
may require capacitors to be ?tted between the Tip and Ring
connections and ground.
Basic TBU Operation
The TBU ? device, constructed using MOSFET semiconductor
technology, placed in the system circuit will monitor the
current with the MOSFET detection circuit triggering to provide
an effective barrier behind which sensitive electronics are not
exposed to large voltages or currents during surge events. The
TBU ? device operates in approximately 1 μs - once line current
exceeds the TBU ? device’s trigger current I trigger . When
operated, the TBU ? device restricts line current to less than
1 mA typically. When operated, the TBU ? device will block all
voltages including the surge up to rated limits.
When the voltage on the SLIC output is driven below
GND
Vdd
Line 1
SLIC
4
2
1
MOV
C1
Line 1
(V bat – V to ) the TBU-PL series device switches to the
blocking state, regardless of output current in the device.
After the surge, the TBU ? device resets when the voltage
across the TBU ? device falls to the V reset level. The TBU ?
device will automatically reset on lines which have no DC bias
TBU ?
Device
or have DC bias below V reset (such as unpowered signal lines).
Line 2
SLIC
5
8
MOV
C2
Line 2
If the line has a normal DC bias above V reset , the voltage
across the TBU ? device may not fall below V reset after the
-VBAT
Vss
6
surge. In such cases, special care needs to be taken to ensure
that the TBU ? device will reset, with software monitoring as one
method used to accomplish this. Bourns application
engineers can provide further assistance.
Speci?cations are subject to change without notice.
Customers should verify actual device performance in their speci?c applications.
相关PDF资料
PDF描述
TC2030-MCP-NL CABLE TAG-CONNECT IN-CIRCUIT
TC2030-MCP CABLE TAG-CONNECT IN-CIRCUIT LEG
TC2050-IDC-430 CBL PLUG-OF-NAILS MSP430 LEG TI
TC2050-IDC-NL-430 CBL PLUG-OF-NAILS MSP430 TI
TC2050-IDC-NL CBL PLUG-OF-NAILS 10-PIN
相关代理商/技术参数
参数描述
TBU-PL085-100-WH 制造商:Bourns Inc 功能描述:Transient Blocking Unit
TBU-PL085-200-WH 功能描述:浪涌抑制器 Dual 50ohm TBU Devce Bi-directional RoHS:否 制造商:Bourns 电压额定值:40 V 电流额定值:750 mA 工作温度范围:- 40 C to + 125 C 端接类型:SMD/SMT 封装 / 箱体:
TBU-PL085-200-WH 制造商:Bourns Inc 功能描述:Transient Blocking Unit
TBV-100M-2A-3026 制造商:SUPERWORLD 制造商全称:Superworld Electronics 功能描述:TOROIDAL INDUCTOR
TBV-101M-2A-5026 制造商:SUPERWORLD 制造商全称:Superworld Electronics 功能描述:TOROIDAL INDUCTOR