- 您现在的位置：买卖IC网 > PDF目录383886 > TC1301B-UWAVMF (Microchip Technology Inc.) Dual LDO with Microcontroller RESET Function PDF资料下载
参数资料
| 型号： | TC1301B-UWAVMF |
| 厂商： | Microchip Technology Inc. |
| 英文描述： | Dual LDO with Microcontroller RESET Function |
| 中文描述： | 双路LDO稳压器与微控制器的复位功能 |
| 文件页数： | 16/28页 |
| 文件大小： | 890K |
| 代理商： | TC1301B-UWAVMF |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
TC1301A/B
DS21798B-page 16
2005 Microchip Technology Inc.
5.14
TC1301B RESET Timing
The timing waveforms for the TC1301B RESET output
are shown in Figure 5-4. Note that the RESET
threshold input for the TC1301B is V
OUT1
. The V
OUT1
to RESET threshold detector connection is made
internal in the case of the TC1301B.
FIGURE 5-4:
TC1301B RESET Timing.
5.15
Device Protection
5.15.1
OVERCURRENT LIMIT
In the event of a faulted output load, the maximum
current the LDO output will permit to flow is limited
internally for each of the TC1301A/B outputs. The peak
current limit for V
OUT1
is typically 1.1A, while the peak
current limit for V
OUT2
is typically 0.5A. During short-
circuit operation, the average current is limited to
200 mA for V
OUT1
and 140 mA for V
OUT2
.The V
DET
and RESET circuit will continue to operate in the event
of an overcurrent on either output for the TC1301A.
The voltage detect and RESET circuit will continue to
operate in the event of an overcurrent on V
OUT1
(or
V
OUT2
) for the TC1301B. In the event of an overcurrent
on V
OUT1
, the RESET will detect the absence of V
OUT1
.
5.15.2
OVERTEMPERATURE
PROTECTION
If the internal power dissipation within the TC1301A/B
is excessive due to a faulted load or higher-than-
specified line voltage, an internal temperature-sensing
element will prevent the junction temperature from
exceeding approximately 150
°
C. If the junction
temperature does reach 150
°
C, both outputs will be
disabled until the junction temperature cools to
approximately 140
°
C. The device will resume normal
operation. If the internal power dissipation continues to
be excessive, the device will again shut off. The V
DET
and RESET circuit will continue to operate normally
during an overtemperature fault condition for both the
TC1301A and TC1301B.
RESET Time
T
RPD
V
TH
V
OUT1
RESET
1V
V
OL
V
OH
V
IN
相关PDF资料 |
PDF描述 |
|---|---|
| TC1301B-UWAVMFTR | Dual LDO with Microcontroller RESET Function |
| TC1301B-UWAVUA | Dual LDO with Microcontroller RESET Function |
| TC1301A | Dual LDO with Microcontroller RESET Function |
| TC1301A-ADAVMF | Dual LDO with Microcontroller RESET Function |
| TC1301A-ADAVMFTR | Dual LDO with Microcontroller RESET Function |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TC1301B-UWAVMFTR | 功能描述:低压差稳压器 - LDO Dual CMOS LDO 300mA & 150mA RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TC1301B-UWAVUA | 功能描述:低压差稳压器 - LDO Dual CMOS LDO 300mA & 150mA RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TC1301B-UWAVUATR | 功能描述:低压差稳压器 - LDO Dual CMOS LDO 300mA & 150mA RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TC1301V | 制造商:TRANSCOM 制造商全称:TRANSCOM 功能描述:Low Noise and Medium Power GaAs FETs |
| TC130252S60 | 制造商:ROEBUCK 功能描述:RBK T/C BUR DIA/CUT B/N CYLINDER 12X25X6 |
发布紧急采购，3分钟左右您将得到回复。