- 您现在的位置：买卖IC网 > PDF目录98169 > TC227-40 (TEXAS INSTRUMENTS INC) SPECIALTY ANALOG CIRCUIT, PDSO6 PDF资料下载
参数资料
| 型号： | TC227-40 |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 模拟信号调理 |
| 英文描述： | SPECIALTY ANALOG CIRCUIT, PDSO6 |
| 封装： | WINDOWED, PLASTIC PACKAGE-6 |
| 文件页数： | 9/14页 |
| 文件大小： | 216K |
| 代理商： | TC227-40 |
TC221, TC225, TC227
SMALL-FORMAT CCD IMAGE SENSORS
SOCS037C – DECEMBER 1991 – REVISED AUGUST 1997
4
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
detailed description
The TC221, TC225, and TC227 consist of four basic functional blocks: (1) the image-sensing area, (2) the serial
registers, (3) the sensor node, and (4) the low-noise source-follower amplifier. The location of each of these
blocks is identified in the functional block diagrams.
image-sensing area
As light enters the silicon in the image-sensing area, free electrons are generated and collected in the potential
wells of the sensing elements. During this time, blooming protection is activated by applying a burst of pulses
to the antiblooming gate. This prevents blooming by the spilling of charge from overexposed elements into
neighboring elements. After integration and under dark conditions, the charge is transferred line by line into the
serial register(s). The required timing is shown in Figure 1 through Figure 3. During transfer, the antiblooming
gate is held at a low level. Each imager contains a specified number of dark pixels on the left side of the
image-sensing area. These elements provide the dark reference used in subsequent video-processing circuits
to restore the video black-level.
serial register(s)
Once an image line is transferred into the serial register, the serial-register gate can be clocked until all of the
charge packets are moved out onto the sense node. A drain is also included to provide the capability to clear
the image-sensing area of unwanted charge. Such charge can accumulate in the imager during the start-up of
operation or under special conditions when nonstandard TV operation is desired.
sense node(s) and source-follower amplifier(s)
After the charge packet is placed on the sense node, the potential of this node changes in proportion to the
amount of signal received. It is then buffered by a dual-stage source-follower amplifier. The sense node and
amplifier are located some distance from the serial register; a specified number of dummy elements is used to
span the distance. The location and number of the dummy elements are shown in the functional block diagrams.
Terminal Functions
TERMINAL
NAME
NUMBER
I/O
DESCRIPTION
NAME
TC221
TC225
TC227
ABG
2
4
5
I
Antiblooming gate
ADB
4
7
3
Amplifier-drain bias
IAG
3
5
4
I
Image-area gate
NC
N/A
6
N/A
No internal connection
OUT1
5
9
2
O
Output signal 1
OUT2
N/A
8
N/A
O
Output signal 2
SRG1
1
2
6
I
Serial-register gate 1
SRG2
N/A
3
N/A
I
Serial-register gate 2
SUB
6
10
1
Substrate
TRG
N/A
1
N/A
I
Transfer gate
N/A – not applicable
相关PDF资料 |
PDF描述 |
|---|---|
| TC221-40 | SPECIALTY ANALOG CIRCUIT, PDSO6 |
| TC253SPD-B0 | SPECIALTY ANALOG CIRCUIT, CDIP22 |
| TC255 | SPECIALTY ANALOG CIRCUIT, CDIP8 |
| TC2574-VOETR | 1.8 A SWITCHING REGULATOR, 63 kHz SWITCHING FREQ-MAX, PDSO16 |
| TC2575-12.0VAT | 3.2 A SWITCHING REGULATOR, 63 kHz SWITCHING FREQ-MAX, PSFM5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TC2281 | 制造商:TRANSCOM 制造商全称:TRANSCOM 功能描述:Low Noise and High Dynamic Range Packaged GaAs FETs |
| TC2282 | 制造商:TRANSCOM 制造商全称:TRANSCOM 功能描述:Low Noise Ceramic Packaged PHEMT GaAs FETs |
| TC228SC | 制造商:Thomas Betts 功能描述:Exact Equal/ 1-5 Days |
| TC228-TB | 制造商:Thomas & Betts 功能描述:ID Plate, Cable Tie 制造商:Thomas & Betts 功能描述:Cable Ties Standard Locking Nylon |
| TC229SC | 制造商:Thomas Betts 功能描述:Exact Equal/ 1-5 Days |
发布紧急采购，3分钟左右您将得到回复。