参数资料
型号: TEA1612T
厂商: NXP SEMICONDUCTORS
元件分类: 模拟信号调理
英文描述: SPECIALTY ANALOG CIRCUIT, PDSO24
封装: 7.50 MM, PLASTIC, MS-013, SOT137-1, SOP-24
文件页数: 16/19页
文件大小: 108K
代理商: TEA1612T
TEA1612T_1
NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 — 24 September 2009
6 of 19
NXP Semiconductors
TEA1612T
Zero voltage switching resonant converter controller
7.2 Oscillator
The internal oscillator is a current-controlled oscillator that generates a sawtooth output.
The frequency of the sawtooth is determined by the external capacitor Cf and the currents
owing into the IFS and IRS pins.
The minimum frequency and the non-overlap time are set by the capacitor Cf and
resistors Rf(min) and Rno. The maximum frequency is set by resistor Rf (see Figure 7).
The oscillator frequency is exactly twice the bridge frequency to achieve an accurate 50 %
duty factor. An overview of the oscillator and driver signals is given in Figure 5.
7.3 Non-overlap time resistor
The non-overlap time resistor Rno is connected between the 3 V reference pin VREF, and
the IFS current input pin (see Figure 7). The voltage on the IFS pin is kept constant at a
temperature independent value of 0.6 V. The current that ows into the IFS pin is
determined by resistor's Rno 2.4 V voltage drop divided by its value. The IFS input current
equals 1/16 of the discharge current of capacitor Cf and determines the falling slope of the
oscillator.
The falling slope time is used to create a non-overlap time (tno) between two successive
switching actions of the half-bridge switches:
7.4 Minimum frequency resistor
The Rf(min) resistor is connected between the VREF pin (3 V reference voltage) and the
IRS current input pin (held at a temperature independent voltage level of 0.6 V). The
charge current of the capacitor Cf is twice the current owing into the IRS pin.
Fig 5.
Oscillator and driver signals
014aaa685
t
non-overlap time (high to low)
non-overlap time (low to high)
CF
GL
0
GH-SH
I
IFS
2.4V
R
no
-----------
=
t
no
C
f
V
Cf
×
16
I
×
IFS
--------------------------
=
t
IFS
t
no
=
相关PDF资料
PDF描述
TEA1742T 2 A POWER FACTOR CONTROLLER, 150 kHz SWITCHING FREQ-MAX, PDSO8
TEA1761T/N2 1.4 A SWITCHING CONTROLLER, PDSO8
TEA1795T/N1 SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, PDSO8
TEA2025D013TR 2.8 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO16
TEA2025D 2.8 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO20
相关代理商/技术参数
参数描述
TEA1612T/N1,518 功能描述:交流/直流开关转换器 IC RESONANT CONV CTRLR RoHS:否 制造商:STMicroelectronics 输出电压:800 V 输入/电源电压(最大值):23.5 V 输入/电源电压(最小值):11.5 V 开关频率:115 kHz 电源电流:1.6 mA 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:SSO-10 封装:Reel
TEA1613T/N1,518 功能描述:交流/直流开关转换器 IC CTLR RESONANT CONV RoHS:否 制造商:STMicroelectronics 输出电压:800 V 输入/电源电压(最大值):23.5 V 输入/电源电压(最小值):11.5 V 开关频率:115 kHz 电源电流:1.6 mA 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:SSO-10 封装:Reel
TEA1620P 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:STARplug
TEA1620P/N1,112 功能描述:开关变换器、稳压器与控制器 STARPLUG SMPS CNTRLR 48 OHM RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel
TEA1622P 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:STARplugTM